| DAATR, daatr | Specifies a reference point for the alternative annotated text and defines an annotated offset. |
| DAATR3, daatr3 | Specifies a reference point for the alternative annotated text and defines an annotated offset. |
| DANBTC, danbtc | Builds the trim curve data record for the NONUNIFORM B-SPLINE SURFACE 3 function. |
| DATX, datx | Specifies text formats other than 8-bit formats. |
| DATX3, datx3 | Specifies text formats other than 8-bit formats. |
| DBREND, dbrend | Causes immediate mode rendering to begin. |
| DBSTR, dbstr | Simulates the first part of the PEXST function. |
| DCARC2, dcarc2 | Specifies the 2D, shorthand form of the circular arc primitive. |
| DCEL, dcel | Copies the specified element to the open structure. |
| DCELRA, dcelra | Copies a range of elements to the open structure. |
| DCEXST, dcexst | Executes the structure if the specified condition is met. |
| DCINST, dcinst | Includes the structure if the specified condition is met. |
| DCIRC, dcirc | Specifies the 3D, shorthand form of the filled circle primitive. |
| DCIRC2, dcirc2 | Specifies the 2D, shorthand form of the filled circle primitive. |
| DCONE, dcone | Generates a cone. |
| DCRARC, dcrarc | Specifies the 3D, shorthand form of the circular arc primitive. |
| DCREC, dcrec | Stops traversing the current structure if the specified condition is met. |
| DCSKEL, dcskel | Skips over the specified number of elements in the structure if the test succeeds. |
| DCSKLB, dcsklb | Causes traversal to skip to the next element after the specified label if the test succeeds. |
| DCUBE, dcube | Generates a cube. |
| DCYDR, dcydr | Generates a cylinder. |
| DELP, delp | Specifies the 2D, shorthand form of the filled ellipse primitive. |
| DELP3, delp3 | Specifies the 3D form of the filled ellipse primitive. |
| DELPA, delpa | Specifies the 2D, shorthand form of the elliptical arc primitive. |
| DELPA3, delpa3 | Specifies the 3D form of the elliptical arc primitive. |
| DEREND, derend | Ends immediate mode rendering on the workstation, and flushes all HLHSR buffers. |
| DESTR, destr | Restores the attributes that were present before you called the DBSTR function. |
| DFASW, dfasw | Defines a 2D fill area set with shape flag primitive. |
| DFASW3, dfasw3 | Defines a 3D fill area set with shape flag primitive. |
| DFAW, dfaw | Defines a 2D fill area with shape flag primitive. |
| DFAW3, dfaw3 | Defines a 3D fill area 3 with shape flag primitive. |
| DGRC, dgrc | Returns the set of fixed colors used for the workstation. |
| DHTTST, dhttst | Performs a pick operation on an output workstation when the application is using the X11[R] event queue. |
| DICS, dics | Provides number of color table entries currently used by each color table type. |
| DINCST, dincst | Specifies the structure identifier of the structure to be executed. |
| DIPC, dipc | Performs the same function as the DSUPC and DSPC functions. |
| DIPD3, dipd3 | Specifies facet, edge, and vertex data and values. |
| DLCIR, dlcir | Specifies the 2D, shorthand form of the unfilled circle primitive. |
| DLCIR3, dlcir3 | Specifies the 3D, shorthand form of the unfilled circle primitive. |
| DLELP, dlelp | Specifies the 2D, shorthand form of the unfilled ellipse primitive. |
| DLELP3, dlelp3 | Specifies the 3D form of the unfilled ellipse primitive. |
| DMEL, dmel | Moves an element within the open structure. |
| DMELRA, dmelra | Moves an element range within the open structure. |
| DMPDW, dmpdw | Converts device coordinate points to world coordinate values. |
| DMPDWS, dmpdws | Converts device coordinate points to window system coordinate values. |
| DMWSDC, dmwsdc | Converts window system points to device coordinate values. |
| DPARLL, dparll | Generates a parallelogram. |
| DPLS, dpls | Generates a set of unconnected 2D polylines. |
| DPLS3, dpls3 | Generates a set of unconnected 3D polylines. |
| DPTVW, dptvw | Adds a structure to the list of posted structures entry for a particular view. |
| DPXMP, dpxmp | Creates a pixmap structure element. |
| DQAPFT, dqapft | Returns the application filter. |
| DQHI, dqhi | Returns nth element of highlight indexes list and list size. |
| DQHLFA, dqhlfa | Returns highlighting method and bundle information. |
| DQHLR, dqhlr | Returns highlighting representation information. |
| DQPHLR, dqphlr | Returns predefined highlight information for the index. |
| DQPXMR, dqpxmr | Returns identifier and offset of the pixmap index. |
| DQREND, dqrend | Inquires which workstations are rendering in immediate mode. |
| DQSPTV, dqsptv | Returns nth element of list of structure identifiers, priority of nth structure posted to the view, and number of structures posted to the view. |
| DQVDPR, dqvdpr | Returns display priorities of the view indexes. |
| DQVWPO, dqvwpo | Returns nth element of list of view identifiers and number of views to which the structure is posted. |
| DQXWVR, dqxwvr | Returns extended view representation information. |
| DRELRA, drelra | Renders a range of elements without entering immediate or quick update mode. |
| DRPC, drpc | Releases a color approximation data record. |
| DSAPFT, dsapft | Specifies the application filter to be used on a workstation. |
| DSAPIN, dsapin | Sets the selected application attribute to the specified integer value. |
| DSAPRL, dsaprl | Sets the selected application attribute to the specified real number value. |
| DSCAI, dscai | Resets the current color approximation index during structure traversal. |
| DSEPPD, dseppd | Sets the element pointer to a specified pick identifier. |
| DSHI, dshi | Creates or redefines the highlight index. |
| DSHR, dshr | Associates a highlight index with various highlighting information. |
| DSPC, dspc | Installs a pseudo color mapping data record and assigns the given index to this mapping. |
| DSPHI, dsphi | Specifies a value for the highlighting index used in pick echoing. |
| DSPHR, dsphr | Generates a sphere. |
| DSPM, dspm | Allocates one or more bit planes for exclusive use by the application. |
| DSPXMR, dspxmr | Sets the pixmap table of the specified index. |
| DSUPC, dsupc | Creates an array of colors of constant hue and saturation but varying luminance, and sets the weight vector. |
| DSVWDP, dsvwdp | Modifies the view display priority. |
| DSXVR3, dsxvr3 | Modifies the extended view representation 3 element. |
| DSXVWR, dsxvwr | Modifies the extended view representation element. |
| DUAFAV, duafav | Unposts all structures from all views. |
| DUAFVW, duafvw | Unposts all structures from a view. |
| DUFAVW, dufavw | Unposts a structure from all views. |
| DUFVW, dufvw | Unposts a structure from a view. |
| DUPWSS, dupwss | Executes all deferred actions for the workstation before further changes are applied. |
| padd_names_set | Adds the group names to the current name set. |
| PADS, pads | Adds the group names to the current name set. |
| panno_text_rel | Specifies a reference point for the annotated text in world and defines an annotated offset. |
| panno_text_rel3 | Specifies a reference point for the annotated text in world and defines an annotated offset. |
| PAP, pap | Creates a structure element that specifies the application data to be inserted into the open structure. |
| pappl_data | Creates a structure element that specifies the application data to be inserted into the open structure. |
| par_all_structs | Specifies the archive file identifier of the archive file to which all structures in the CSS will be archived. |
| par_struct_nets | Specifies the archive file identifier and the list of structure identifiers for the networks to be archived. |
| par_structs | Specifies the archive file identifier and the list of structure identifiers for the structures to be archived. |
| PARAST, parast | Specifies the archive file identifier of the archive file to which all structures in the CSS will be archived. |
| PARSN, parsn | Specifies the archive file identifier and the list of structure identifiers for the networks to be archived. |
| PARST, parst | Specifies the archive file identifier and the list of structure identifiers for the structures to be archived. |
| PATR, patr | Specifies a reference point for the annotated text in world and defines an annotated offset. |
| PATR3, patr3 | Specifies a reference point for the annotated text in world and defines an annotated offset. |
| PATR3S, patr3s | Specifies a reference point for the annotated text in world and defines an annotated offset. |
| PATRS, patrs | Specifies a reference point for the annotated text in world and defines an annotated offset. |
| pawait_event | Attempts to remove the oldest report from the input queue. |
| PBLTM, pbltm | Creates a 2D homogeneous transformation matrix and performs the specified transformation. |
| PBLTM3, pbltm3 | Creates a 3D homogeneous transformation matrix and performs the specified transformation. |
| PBSC3, pbsc3 | Specifies the 3D nonuniform B-spline curve primitive. |
| PBSC3C, pbsc3c | Specifies the 3D nonuniform B-spline curve 3 with color primitive. |
| PBSS3, pbss3 | Specifies the 3D form of the nonuniform B-spline surface primitive. |
| PBSS3D, pbss3d | Specifies the 3D form of the nonuniform B-spline surface with data primitive. |
| pbuild_tran_matrix | Creates a 2D homogeneous transformation matrix and performs the specified transformation. |
| pbuild_tran_matrix3 | Creates a 3D homogeneous transformation matrix and performs the specified transformation. |
| PCA, pca | Divides a designated rectangular area into cells, and displays each cell in a specified color. |
| PCA3, pca3 | Divides a designated parallelogram into cells, and displays each cell in a specified color. |
| PCA3P, pca3p | Divides a designated parallelogram into cells, and displays each cell in a specified color. |
| pcell_array | Divides a designated rectangular area into cells, and displays each cell in a specified color. |
| pcell_array3 | Divides a designated parallelogram into cells, and displays each cell in a specified color. |
| pcell_array3_plus | Divides a designated parallelogram into cells, and displays each cell in a specified color. |
| PCELST, pcelst | Specifies the structure identifier of the structure to be copied. |
| pchange_struct_id | Changes a structure identifier. |
| pchange_struct_id_refs | Executes the pchange_struct_id and pchange_struct_refs functions. |
| pchange_struct_refs | Replaces structure elements referencing a structure with elements referencing another structure. |
| PCLARF, pclarf | Closes an archive file and removes its identifier from the open archive files in the PHIGS state list. |
| pclose_ar_file | Closes an archive file and removes its identifier from the open archive files in the PHIGS state list. |
| pclose_phigs | Releases all PHIGS buffers and closes all PHIGS files. |
| pclose_struct | Closes the open structure. |
| pclose_ws | Specifies the workstation identifier of the workstation to be closed. |
| PCLPH, pclph | Releases all PHIGS buffers and closes all PHIGS files. |
| PCLST, pclst | Closes the open structure. |
| PCLWK, pclwk | Specifies the workstation identifier of the workstation to be closed. |
| PCOM, pcom | Composes a 2D homogeneous transformation matrix from two matrices. |
| PCOM3, pcom3 | Composes a 3D homogeneous transformation matrix from two matrices. |
| pcompose_matrix | Composes a 2D homogeneous transformation matrix from two matrices. |
| pcompose_matrix3 | Composes a 3D homogeneous transformation matrix from two matrices. |
| pcompose_tran_matrix | Returns a 2D homogeneous transformation matrix. |
| pcompose_tran_matrix3 | Returns a 3D homogeneous transformation matrix. |
| pcopy_all_elems_struct | Specifies the structure identifier of the structure to be copied. |
| PCOTM, pcotm | Returns a 2D homogeneous transformation matrix. |
| PCOTM3, pcotm3 | Returns a 3D homogeneous transformation matrix. |
| pcreate_store | Creates a store object and returns the handle to the object in the store argument. |
| PCSTID, pcstid | Changes a structure identifier. |
| PCSTIR, pcstir | Executes the PCSTID and PCSTRF functions. |
| PCSTRF, pcstrf | Replaces structure elements referencing a structure with elements referencing another structure. |
| PDAS, pdas | Deletes all structures in the Digital PHIGS system. |
| PDASAR, pdasar | Deletes all structures in the specified open archive file. |
| PDEL, pdel | Deletes the element indicated by the element pointer. |
| pdel_all_structs | Deletes all structures in the Digital PHIGS system. |
| pdel_all_structs_ar | Deletes all structures in the specified open archive file. |
| pdel_elem | Deletes the element indicated by the element pointer. |
| pdel_elem_range | Deletes a range of elements. |
| pdel_elems_labels | Deletes the elements between the specified first and second labels. |
| pdel_store | Deletes a store object and frees all memory associated with it. |
| pdel_struct | Deletes a structure, including its identifier contents, and all PHIGS references. |
| pdel_struct_net | Deletes the structures of a structure network. |
| pdel_struct_nets_ar | Deletes a structure network or list of structure networks from the specified archive file. |
| pdel_structs_ar | Deletes an archive structure or list of structures from the specified archive file. |
| PDELLB, pdellb | Deletes the elements between the specified first and second labels. |
| PDELRA, pdelra | Deletes a range of elements. |
| PDSN, pdsn | Deletes the structures of a structure network. |
| PDSNAR, pdsnar | Deletes a structure network or list of structure networks from the specified archive file. |
| PDST, pdst | Deletes a structure, including its identifier contents, and all PHIGS references. |
| PDSTAR, pdstar | Deletes an archive structure or list of structures from the specified archive file. |
| pe_alt_anno_text_rel | Specifies a reference point for the alternative annotated text and defines an annotated offset. |
| pe_alt_anno_text_rel3 | Specifies a reference point for the alternative annotated text and defines an annotated offset. |
| pe_alt_text | Specifies text formats other than 8-bit formats. |
| pe_alt_text3 | Specifies text formats other than 8-bit formats. |
| pe_begin_rend | Causes immediate mode rendering to begin. |
| pe_begin_struct | Simulates the first part of the pexec_struct function. |
| pe_circle | Specifies the 2D, shorthand form of the unfilled circle primitive. |
| pe_circle3 | Specifies the 3D, shorthand form of the unfilled circle primitive. |
| pe_circular_arc | Specifies the 2D, shorthand form of the circular arc primitive. |
| pe_circular_arc3 | Specifies the 3D, shorthand form of the circular arc primitive. |
| pe_cond_exec_struct | Executes the structure if the specified condition is met. |
| pe_cond_incl_struct | Includes the structure if the specified condition is met. |
| pe_cond_return | Stops traversing the current structure if the specified condition is met. |
| pe_cond_skip_elems | Skips over the specified number of elements in the structure if the test succeeds. |
| pe_cond_skip_label | Causes traversal to skip to the next element after the specified label if the test succeeds. |
| pe_cone | Generates a cone. |
| pe_copy_elem | Copies the specified element to the open structure. |
| pe_copy_elem_range | Copies a range of elements to the open structure. |
| pe_cube | Generates a cube. |
| pe_cylinder | Generates a cylinder. |
| pe_ellipse | Specifies the 2D, shorthand form of the unfilled ellipse primitive. |
| pe_ellipse3 | Specifies the 3D form of the unfilled ellipse primitive. |
| pe_elliptical_arc | Specifies the 2D, shorthand form of the elliptical arc primitive. |
| pe_elliptical_arc3 | Specifies the 3D form of the elliptical arc primitive. |
| pe_end_rend | Ends immediate mode rendering on the workstation, and flushes all HLHSR buffers. |
| pe_end_struct | Restores the attributes that were present before you called the pe_begin_struct function. |
| pe_fill_area3_wshape | Defines a 3D fill area 3 with shape flag primitive. |
| pe_fill_area_set3_wshape | Defines a 3D fill area set with shape flag primitive. |
| pe_fill_area_set_wshape | Defines a 2D fill area set with shape flag primitive. |
| pe_fill_area_wshape | Defines a 2D fill area with shape flag primitive. |
| pe_fill_circle | Specifies the 2D, shorthand form of the filled circle primitive. |
| pe_fill_circle3 | Specifies the 3D, shorthand form of the filled circle primitive. |
| pe_fill_ellipse | Specifies the 2D, shorthand form of the filled ellipse primitive. |
| pe_fill_ellipse3 | Specifies the 3D form of the filled ellipse primitive. |
| pe_get_req_colrs | Returns the set of fixed colors used for the workstation. |
| pe_hit_test | Performs a pick operation on an output workstation when the application is using the X11[R] event queue. |
| pe_incl_struct | Specifies the structure identifier of the structure to be executed. |
| pe_index_polygon_data | Specifies facet, edge, and vertex data and values. |
| pe_init_pseudo_colr | Performs the same function as the pe_setup_pseudo_colr and pe_set_pseudo_colr functions. |
| pe_inq_appl_filter | Returns the application filter. |
| pe_inq_colr_status | Provides the number of color table entries in use by each color table type. |
| pe_inq_ext_view_rep3 | Returns view representation information. |
| pe_inq_highl_fac | Returns the list of highlighting methods, the size of this list, and the number of highlighting bundles. |
| pe_inq_highl_rep | Returns the highlighting method and data of a highlighting index. |
| pe_inq_list_highl_ind | Returns the size of the list returned by the function, the list of highlight indexes, and the size of the list in PHIGS. |
| pe_inq_pixmap_rep | Returns the pixmap identifier and the index offset. |
| pe_inq_posted_structs_view | Returns information about structures posted to a view. |
| pe_inq_pred_highl_rep | Returns highlight representation information. |
| pe_inq_set_views_posted | Returns the size of the list the function returns, the list of view identifiers, and the size of the view list. |
| pe_inq_view_disp_pris | Returns a view index list. |
| pe_inq_ws_rend | Inquires which workstation is currently rendering in immediate mode. |
| pe_map_dc_to_wc | Converts device coordinate points to world coordinate values. |
| pe_map_dc_to_wsc | Converts device coordinate points to window system coordinate values. |
| pe_map_wsc_to_dc | Converts window system points to device coordinate values. |
| pe_move_elem | Moves an element within the open structure. |
| pe_move_elem_range | Moves an element range within the open structure. |
| pe_parallelogram | Generates a parallelogram. |
| pe_pixmap | Creates a pixmap structure element. |
| pe_polyline_set | Generates a set of unconnected 2D polylines. |
| pe_polyline_set3 | Generates a set of unconnected 3D polylines. |
| pe_post_struct_view | Adds a structure to the list of posted structures entry for a particular view. |
| pe_release_pseudo_colr | Releases a color approximation data record. |
| pe_rend_elem_range | Renders a range of elements without entering immediate or quick update mode. |
| pe_set_appl_filter | Specifies the application filter to be used on a workstation. |
| pe_set_appl_float | Sets the selected application attribute to the specified real number value. |
| pe_set_appl_int | Sets the selected application attribute to the specified integer value. |
| pe_set_colr_approx_ind | Resets the current color approximation index during structure traversal. |
| pe_set_elem_ptr_pick_id | Sets the element pointer to a specified pick identifier. |
| pe_set_ext_view_rep | Modifies the extended view representation element. |
| pe_set_ext_view_rep3 | Modifies the extended view representation 3 element. |
| pe_set_highl_ind | Creates or redefines the highlight index. |
| pe_set_highl_rep | Associates a highlight index with various highlighting information. |
| pe_set_pick_highl_ind | Specifies a value for the highlighting index used in pick echoing. |
| pe_set_pixmap_rep | Sets the pixmap table of the specified index. |
| pe_set_plane_mask | Allocates one or more bit planes for exclusive use by the application. |
| pe_set_pseudo_colr | Installs a pseudo color mapping data record and assigns the given index to this mapping. |
| pe_set_view_disp_pri | Modifies the view display priority. |
| pe_setup_pseudo_colr | Creates an array of colors of constant hue and saturation but varying luminance, and sets the weight vector. |
| pe_sphere | Generates a sphere. |
| pe_unpost_all_structs_all_views | Unposts all structures from all views. |
| pe_unpost_all_structs_view | Unposts all structures from a view. |
| pe_unpost_struct_all_views | Unposts a structure from all views. |
| pe_unpost_struct_view | Unposts a structure from a view. |
| pe_upd_ws_synch | Executes all deferred actions for the workstation before further changes are applied. |
| PECLPH, peclph | Shuts down the Digital PHIGS system. |
| pelem_search | Searches for the next matching element in the specified structure. |
| PELS, pels | Searches for the next matching element in the specified structure. |
| pemergency_close_phigs | Shuts down the Digital PHIGS system. |
| pempty_struct | Deletes all elements from a structure. |
| PEMST, pemst | Deletes all elements from a structure. |
| PERHND, perhnd | Default error handling function. |
| PERLOG, perlog | Writes an error message and the PHIGS function name to the error file, and returns control to the calling procedure. |
| perr_hand | Default error handling function. |
| perr_log | Writes an error message and the PHIGS function name to the error file, and returns control to the calling procedure. |
| PESC, pesc | Invokes the specified escape function. |
| pescape | Invokes the specified escape function. Operating States: PHOP, ∗, ∗, ∗ PHIGS standard function |
| peval_view_map_matrix | Creates a view mapping matrix. |
| peval_view_map_matrix3 | Returns a view mapping matrix. |
| peval_view_ori_matrix | Provides for 2D translation and rotation in the xy-plane of the world coordinate system. |
| peval_view_ori_matrix3 | Provides for 3D translation and rotation of axes. |
| PEVMM, pevmm | Creates a view mapping matrix. |
| PEVMM3, pevmm3 | Returns a view mapping matrix. |
| PEVOM, pevom | Provides for 2D translation and rotation in the xy-plane of the world coordinate system. |
| PEVOM3, pevom3 | Provides for 3D translation and rotation of axes. |
| pexec_struct | Specifies the structure identifier of the structure to be executed. |
| PEXST, pexst | Specifies the structure identifier of the structure to be executed. |
| PFA, pfa | Defines a 2D fill area primitive. |
| PFA3, pfa3 | Defines a 3D fill area primitive. |
| PFAS, pfas | Defines a 2D fill area set primitive. |
| PFAS3, pfas3 | Defines a 3D fill area set primitive. |
| PFAS3D, pfas3d | Creates a structure element that specifies values for data and data flags, defining the 3D form of the output primitive. |
| PFASD, pfasd | Creates a structure element that specifies values for data and data flags. |
| pfill_area | Defines a 2D fill area primitive. |
| pfill_area3 | Defines a 3D fill area primitive. |
| pfill_area_set | Defines a 2D fill area set primitive. |
| pfill_area_set3 | Defines a 3D fill area set primitive. |
| pfill_area_set3_data | Creates a structure element that specifies values for data and data flags, defining the 3D form of the output primitive. |
| pfill_area_set_data | Creates a structure element that specifies values for data and data flags. |
| PFLUSH, pflush | Removes all event reports generated by a specified logical input device. |
| pflush_events | Removes all event reports generated by a specified logical input device. |
| pgdp | Generates a generalized drawing primitive (GDP) of the specified type. |
| pgdp3 | Generates a generalized drawing primitive (GDP) 3 of the specified type. |
| pget_choice | Returns information about a user choice. |
| pget_item_type | Returns the item type and the length of the item data record. |
| pget_loc | Returns the 2D position of the locator. |
| pget_loc3 | Returns the 3D position of the locator. |
| pget_pick | Returns the pick path list. |
| pget_string | Returns a character string. |
| pget_stroke | Returns the 2D coordinates of the points in a stroke. |
| pget_stroke3 | Returns the 3D coordinates of the points in a stroke. |
| pget_val | Returns a real value. |
| pgse | Specifies the generalized structure element (GSE) identifier and data record. |
| PGTCH, pgtch | Returns information about a user choice. |
| PGTITM, pgtitm | Returns the item type and the length of the item data record. |
| PGTLC, pgtlc | Returns the 2D position of the locator. |
| PGTLC3, pgtlc3 | Returns the 3D position of the locator. |
| PGTPK, pgtpk | Returns the pick path list. |
| PGTSK, pgtsk | Returns the 2D coordinates of the points in a stroke. |
| PGTSK3, pgtsk3 | Returns the 3D coordinates of the points in a stroke. |
| PGTST, pgtst | Returns a character string. |
| PGTVL, pgtvl | Returns a real value. |
| phigs | 3D graphics support |
| PIITM, piitm | Interprets an item data record obtained by a call to PRDITM. |
| PINCH, pinch | Sets the choice device to application-required values. |
| PINCH3, pinch3 | Sets the choice device to application-required values. |
| pincr_spa_search | Searches the structure, beginning at the specified element. |
| pincr_spa_search3 | Searches the structure, beginning at the specified element. |
| pinit_choice | Sets the choice device to application-required values. |
| pinit_choice3 | Sets the choice device to application-required values. |
| pinit_loc | Sets the locator device to application-specific values. |
| pinit_loc3 | Sets the locator device to application-specific values. |
| pinit_pick | Sets the pick device to application-specific values. |
| pinit_pick3 | Sets the pick device to application-specific values. |
| pinit_string | Sets the string device to application-specific values. |
| pinit_string3 | Sets the string device to application-specific values. |
| pinit_stroke | Sets the stroke device to application-specific values. |
| pinit_stroke3 | Sets the stroke device to application-specific values. |
| pinit_val | Sets the valuator device to application-specific values. |
| pinit_val3 | Sets the valuator device to application-specific values. |
| PINLC, pinlc | Sets the locator device to application-specific values. |
| PINLC3, pinlc3 | Sets the locator device to application-specific values. |
| PINPK, pinpk | Sets the pick device to application-specific values. |
| PINPK3, pinpk3 | Sets the pick device to application-specific values. |
| pinq_all_conf_structs | Returns list of identifiers for structures in the CSS and the archive file. |
| pinq_anno_facs | Returns information about the annotation text facilities. |
| pinq_ar_files | Returns a list of open archive files. |
| pinq_ar_st | Identifies the PHIGS archive state as either ARCL or AROP. |
| pinq_b_spline_surf_facs | Returns information on polynomial curve types and data. |
| pinq_choice_st | Returns device state information. |
| pinq_choice_st3 | Returns device state information. |
| pinq_colr_facs | Returns color information. |
| pinq_colr_map_facs | Returns the list of available color mapping methods. |
| pinq_colr_map_method_facs | Returns information about available color mapping methods. |
| pinq_colr_map_rep | Returns color mapping information associated with an index. |
| pinq_colr_map_st | Returns color mapping data record associated with a color mapping method. |
| pinq_colr_model | Returns the color model for the workstation. |
| pinq_colr_model_facs | Returns color model information. |
| pinq_colr_rep | Returns color values. |
| pinq_conf_res | Returns the conflict resolution flags. |
| pinq_conf_structs_net | Returns structure identifiers found in both the CSS and the archive file. |
| pinq_cur_elem_content | Returns the values associated with the specified structure element. |
| pinq_cur_elem_type_size | Returns the element type and size of the specified structure. |
| pinq_curve_facs | Returns information on the curve approximation types. |
| pinq_data_map_facs | Returns the list of available data mapping methods. |
| pinq_data_map_rep | Returns the data mapping information associated with the specified index. |
| pinq_def_choice_data | Returns choice information. |
| pinq_def_choice_data3 | Returns choice information. |
| pinq_def_disp_upd_st | Returns the default values for display update. |
| pinq_def_loc_data | Returns locator information. |
| pinq_def_loc_data3 | Returns locator information. |
| pinq_def_pick_data | Returns pick information. |
| pinq_def_pick_data3 | Returns pick information. |
| pinq_def_string_data | Returns string information. |
| pinq_def_string_data3 | Returns string information. |
| pinq_def_stroke_data | Returns stroke information. |
| pinq_def_stroke_data3 | Returns stroke information. |
| pinq_def_val_data | Returns valuator information. |
| pinq_def_val_data3 | Returns valuator information. |
| pinq_depth_cue_facs | Returns depth cue table and index information. |
| pinq_depth_cue_rep | Returns depth cue representation information. |
| pinq_direct_colr_model_facs | Returns the number of available direct color models, and the list of direct color models. |
| pinq_disp_space_size | Returns display space information. |
| pinq_disp_space_size3 | Returns display space information. |
| pinq_disp_upd_st | Returns display update information. |
| pinq_dyns_structs | Returns a dynamic modification accepted flag for various types of picture structure changes. |
| pinq_dyns_ws_attrs | Returns a dynamic modification accepted flag for various types of picture changes. |
| pinq_dyns_ws_attrs_plus | Returns a dynamic modification accepted flag for various types of picture changes. |
| pinq_edge_facs | Returns edge width, type, and index information. |
| pinq_edge_rep | Returns edge representation information. |
| pinq_edge_rep_plus | Returns information about the extended edge representation. |
| pinq_edit_mode | Returns the edit mode. |
| pinq_elem_content | Returns the values associated with a structure element. |
| pinq_elem_ptr | Returns the element pointer value. |
| pinq_elem_type_size | Returns the element type of the specified element number. |
| pinq_err_hand_mode | Returns the error handling mode value. |
| pinq_gdp | Returns the number of attribute sets, and the list of attribute sets associated with the specified 2D GDP identifier. |
| pinq_gdp3 | Returns the number of attribute sets, and the list of attribute sets associated with the specified 3D GDP identifier. |
| pinq_gse_facs | Returns the list of GSE identifiers and the list of workstation dependency indicators for each identifier. |
| pinq_highl_filter | Returns the inclusion and exclusion sets for highlighting. |
| pinq_hlhsr_id_facs | Returns the list of available HLHSR identifiers. |
| pinq_hlhsr_mode | Returns the HLHSR update state, current HLHSR mode, and requested HLHSR mode. |
| pinq_hlhsr_mode_facs | Returns the list of available HLHSR modes. |
| pinq_in_overf | Returns the identification of the logical input device that caused an overflow. |
| pinq_int_facs | Returns interior and hatch information. |
| pinq_int_facs_plus | Returns interior, hatch, and shading information. |
| pinq_int_rep | Returns the interior style value, interior style index, and interior color index. |
| pinq_int_rep_plus | Returns information on the extended interior representation. |
| pinq_invis_filter | Returns the inclusion and exclusion sets for invisibility. |
| pinq_light_source_facs | Returns light source information. |
| pinq_light_source_rep | Returns light source type and data record. |
| pinq_line_facs | Returns information about line types, line widths, and polyline indexes. |
| pinq_line_facs_plus | Returns extended polyline information. |
| pinq_line_rep | Returns the line type, line width scale factor, and polyline color index. |
| pinq_line_rep_plus | Returns information on the extended polyline representation. |
| pinq_list_avail_gdp | Returns the list of GDPs supported by Digital PHIGS. |
| pinq_list_avail_gdp3 | Returns the list of GDPs supported by Digital PHIGS. |
| pinq_list_avail_gse | Returns the list of GSE identifiers supported by a workstation type. |
| pinq_list_avail_ws_types | Returns the list of supported workstation types. |
| pinq_list_colr_inds | Returns the list of defined color indexes. |
| pinq_list_colr_map_inds | Returns the list of defined color mapping indexes. |
| pinq_list_data_map_inds | Returns the list of defined data mapping indexes. |
| pinq_list_depth_cue_inds | Returns the list of defined depth cue indexes. |
| pinq_list_edge_inds | Returns the list of defined edge indexes. |
| pinq_list_int_inds | Returns the list of defined interior indexes. |
| pinq_list_light_source_inds | Returns the list of defined light source indexes. |
| pinq_list_line_inds | Returns the number and list of defined polyline indexes. |
| pinq_list_marker_inds | Returns the number and list of defined polymarker indexes. |
| pinq_list_param_surf_inds | Returns the list of defined parametric surface indexes. |
| pinq_list_pat_inds | Returns the number and list of defined pattern indexes. |
| pinq_list_refl_inds | Returns the number and list of defined reflectance indexes. |
| pinq_list_text_inds | Returns the number and list of defined text indexes. |
| pinq_list_view_inds | Returns the number and list of defined view indexes. |
| pinq_loc_st | Returns information about the locator device state. |
| pinq_loc_st3 | Returns locator device state information. |
| pinq_marker_facs | Returns polymarker information. |
| pinq_marker_rep | Returns the marker type, marker size scale factor, and polymarker color index. |
| pinq_marker_rep_plus | Returns information on extended polymarker representation. |
| pinq_model_clip_facs | Returns the list of modeling clipping operators. |
| pinq_more_simult_events | Returns the value of the more simultaneous events flag. |
| pinq_num_avail_in | Returns the number of logical input devices. |
| pinq_num_disp_pris | Returns the number of structure priorities supported. |
| pinq_open_struct | Returns the open structure status and structure identifier. |
| pinq_open_wss | Returns the workstation identifiers of the open workstations. |
| pinq_param_surf_facs | Returns information on polynomial surface types and data. |
| pinq_param_surf_rep | Returns the parametric surface representation. |
| pinq_pat_facs | Returns the number of pattern indexes available for a workstation type. |
| pinq_pat_rep | Returns the values associated with a pattern index value. |
| pinq_pat_rep_plus | Returns the values associated with a pattern index value. |
| pinq_paths_ances | Returns all the paths that reference a structure. |
| pinq_paths_descs | Returns all the paths that are referenced by a structure. |
| pinq_phigs_facs | Returns information about open workstations, open archive files, name sets, and character sets. |
| pinq_pick_st | Returns information about the pick device state. |
| pinq_pick_st3 | Returns information about the pick device state. |
| pinq_posted_structs | Returns the set of structures posted to the workstation and their associated priorities. |
| pinq_pred_colr_map_rep | Returns the color mapping type and color data for an index. |
| pinq_pred_colr_rep | Returns the color triplet of an index. |
| pinq_pred_data_map_rep | Returns the data mapping information for an index. |
| pinq_pred_depth_cue_rep | Returns depth cue information for a depth cue index. |
| pinq_pred_edge_rep | Returns edge representation information. |
| pinq_pred_edge_rep_plus | Returns information about the extended edge representation. |
| pinq_pred_int_rep | Returns information about the interior representation. |
| pinq_pred_int_rep_plus | Returns information about the extended interior representation. |
| pinq_pred_light_source_rep | Returns the light source type and data record. |
| pinq_pred_line_rep | Returns the line type, line width scale factor, and polyline color index for a polyline index. |
| pinq_pred_line_rep_plus | Returns information about the extended polyline representation. |
| pinq_pred_marker_rep | Returns information about the polymarker representation. |
| pinq_pred_marker_rep_plus | Returns information about the extended polymarker representation. |
| pinq_pred_param_surf_rep | Returns the parametric surface type and surface data for an index. |
| pinq_pred_pat_rep | Returns a pattern description. |
| pinq_pred_pat_rep_plus | Returns a pattern description. |
| pinq_pred_refl_rep | Returns the reflectance representation of an index. |
| pinq_pred_text_rep | Returns text information. |
| pinq_pred_text_rep_plus | Returns information about the extended text representation. |
| pinq_pred_view_rep | Returns view representation information. |
| pinq_refl_facs | Returns information about reflectance characteristics. |
| pinq_refl_rep | Returns reflectance representation information for a reflectance index. |
| pinq_rend_colr_model_facs | Returns number of available rendering color models and list of available rendering color models. |
| pinq_string_st | Returns information about the string device state. |
| pinq_string_st3 | Returns information about the string device state. |
| pinq_stroke_st | Returns information about the stroke device state. |
| pinq_stroke_st3 | Returns information about the stroke device state. |
| pinq_struct_ids | Returns a list of the structure identifiers in the CSS. |
| pinq_struct_st | Identifies the structure state as STCL or STOP. |
| pinq_struct_status | Returns a flag indicating whether the structure is empty, not empty, or non-existent. |
| pinq_sys_st | Identifies the system state as PHCL or PHOP. |
| pinq_text_extent | Returns information about the text extent of a character string. |
| pinq_text_facs | Returns text information, including character height, fonts, and text indexes. |
| pinq_text_rep | Returns text representation information. |
| pinq_text_rep_plus | Returns extended text representation information. |
| pinq_trim_curve_facs | Returns trimming curve information. |
| pinq_val_st | Returns information about the valuator device state. |
| pinq_val_st3 | Returns information about the valuator device state. |
| pinq_view_facs | Returns the number of predefined view indexes. |
| pinq_ws_cat | Returns the workstation category value. |
| pinq_ws_class | Returns the workstation classification value. |
| pinq_ws_conn_type | Returns the connection identifier and workstation type. |
| pinq_ws_st | Identifies the workstation state value as WSCL or WSOP. |
| pinq_ws_st_table | Returns the lengths of workstation tables. |
| pinq_ws_st_table_length_plus | Returns the lengths of workstation state tables. |
| pinq_ws_tran | Returns information about workstation window limits and viewport limits. |
| pinq_ws_tran3 | Returns information about workstation window limits and viewport limits. |
| pinq_wss_posted | Returns the workstation identifiers to which a structure is posted. |
| PINSK, pinsk | Sets the stroke device to application-specific values. |
| PINSK3, pinsk3 | Sets the stroke device to application-specific values. |
| PINST, pinst | Sets the string device to application-specific values. |
| PINST3, pinst3 | Sets the string device to application-specific values. |
| pinterpret_item | Interprets an item data record obtained by a call to pread_item. |
| PINVL, pinvl | Sets the valuator device to application-specific values. |
| PINVL3, pinvl3 | Sets the valuator device to application-specific values. |
| PISS, piss | Searches the structure, beginning at the specified element. |
| PISS3, piss3 | Searches the structure, beginning at the specified element. |
| plabel | Specifies a label identifier. |
| PLB, plb | Specifies a label identifier. |
| pmessage | Specifies a workstation identifier and message text. |
| PMSG, pmsg | Specifies a workstation identifier and message text. |
| PMSGS, pmsgs | Specifies a workstation identifier and message text. |
| pnon_uniform_b_spline_curve3 | Specifies the 3D nonuniform B-spline curve primitive. |
| pnon_uniform_b_spline_curve3_colr, pnon_uniform_b_spline_curve3_co | Specifies the 3D nonuniform B-spline curve 3 with color primitive. |
| pnon_uniform_b_spline_surf3 | Specifies the 3D form of the nonuniform B-spline surface primitive. |
| pnon_uniform_b_spline_surf3_data, pnon_uniform_b_spline_surf3_dat | Specifies the 3D form of the nonuniform B-spline surface with data primitive. |
| poffset_elem_ptr | Adds a pointer offset value to the element pointer value. |
| POPARF, poparf | Specifies the identifier and name of the archive file to be opened. |
| popen_ar_file | Specifies the identifier and name of the archive file to be opened. |
| popen_phigs | Initializes a Digital PHIGS session. |
| popen_struct | Opens a structure and positions the pointer to the last element in the structure. |
| popen_ws | Uses a connection identifier to associate a workstation identifier with a generic workstation type. |
| POPHH, pophh | Initializes a Digital PHIGS session. |
| POPST, popst | Opens a structure and positions the pointer to the last element in the structure. |
| POPWK, popwk | Uses a connection identifier to associate a workstation identifier with a generic workstation type. |
| POSEP, posep | Adds a pointer offset value to the element pointer value. |
| PPCSC, ppcsc | Packs color spline curve data for the PBSC3C element or primitive. |
| PPCSS, ppcss | Packs color spline surface data for the PBSS3D element or primitive. |
| PPDSS, ppdss | Packs spline surface data for the PBSS3D element or primitive. |
| PPL, ppl | Draws the 2D form of a straight line. |
| PPL3, ppl3 | Draws the 3D form of a straight line. |
| PPLS3C, ppls3c | Generates a set of unconnected 3D polylines, where color information can be specified for each vertex. |
| PPM, ppm | Draws the 2D form of a polymarker primitive. |
| PPM3, ppm3 | Draws the 3D form of a polymarker primitive. |
| ppolyline | Draws the 2D form of a straight line. |
| ppolyline3 | Draws the 3D form of a straight line. |
| ppolyline_set3_colr | Generates a set of unconnected 3D polylines, where color information can be specified for each vertex. |
| ppolymarker | Draws the 2D form of a polymarker primitive. |
| ppolymarker3 | Draws the 3D form of a polymarker primitive. |
| PPOST, ppost | Adds a structure to the table of posted structures. |
| ppost_struct | Adds a structure to the table of posted structures. |
| PPREC, pprec | Inserts information into a Fortran data record. |
| PPTC, pptc | Packs trimming curve data for the PBSS3D element or primitive. |
| PQANF, pqanf | Returns annotation text information. |
| PQARF, pqarf | Returns a list of open archive files. |
| PQARS, pqars | Identifies PHIGS archive state as open (AROP) or closed (ARCL). |
| PQBSSF, pqbssf | Returns information on polynomial curve types and data. |
| PQCECO, pqceco | Returns values associated with the structure element. |
| PQCETS, pqcets | Returns element type of the structure element. |
| PQCF, pqcf | Returns color information for the workstation. |
| PQCHS, pqchs | Returns information about the choice device state. |
| PQCHS3, pqchs3 | Returns information about the choice device state. |
| PQCMD, pqcmd | Returns error indicator and color model for the specified workstation. |
| PQCMDF, pqcmdf | Returns an error indicator, list of available color models, and default color model. |
| PQCMF, pqcmf | Returns available color mapping methods. |
| PQCMMF, pqcmmf | Returns information about the available color mapping methods. |
| PQCMR, pqcmr | Returns color mapping information for the index. |
| PQCMS, pqcms | Returns color mapping data record for a specified color mapping method. |
| PQCNRS, pqcnrs | Returns conflict resolution flags. |
| PQCR, pqcr | Returns color values. |
| PQCST, pqcst | Queries the PHIGS state list. |
| PQCSTN, pqcstn | Returns structure identifiers. |
| PQCVF, pqcvf | Returns information on curve approximation types. |
| PQDCF, pqdcf | Returns maximum number of depth cue table entries and number of predefined depth cue indexes. |
| PQDCH, pqdch | Returns choice device information. |
| PQDCH3, pqdch3 | Returns choice device information. |
| PQDCMF, pqdcmf | Returns number and list of available direct color models. |
| PQDCR, pqdcr | Returns values for depth cue mode, reference planes, scale factors, and color. |
| PQDCWP, pqdcwp | Returns dynamic modification accepted flags for various complex attribute changes in the picture. |
| PQDDUS, pqddus | Returns values for deferral and modification modes. |
| PQDLC, pqdlc | Returns locator device information. |
| PQDLC3, pqdlc3 | Returns locator device information. |
| PQDMF, pqdmf | Returns list of available data mapping methods. |
| PQDMR, pqdmr | Returns data mapping information associated with specified index. |
| PQDP, pqdp | Returns number of supported structure priorities. |
| PQDPK, pqdpk | Returns pick device information. |
| PQDPK3, pqdpk3 | Returns pick device information. |
| PQDSK, pqdsk | Returns stroke device information. |
| PQDSK3, pqdsk3 | Returns stroke device information. |
| PQDSP, pqdsp | Returns device coordinates unit value and maximum display space size. |
| PQDSP3, pqdsp3 | Returns device coordinates unit value and maximum display space size. |
| PQDST, pqdst | Returns string device information. |
| PQDST3, pqdst3 | Returns string device information. |
| PQDSTR, pqdstr | Returns dynamic modification accepted flags for various structure changes in the picture. |
| PQDSWA, pqdswa | Returns dynamic modification accepted flags for various attribute changes in the picture. |
| PQDUS, pqdus | Returns current display update information. |
| PQDVL, pqdvl | Returns valuator device information. |
| PQDVL3, pqdvl3 | Returns valuator device information. |
| PQECI, pqeci | Returns available color table entries and nth element of defined color index list. |
| PQECMI, pqecmi | Returns nth element of list of defined color mapping indexes. |
| PQECO, pqeco | Returns structure element information. |
| PQEDCI, pqedci | Returns number of available depth cue indexes and nth element of list of defined depth cue indexes. |
| PQEDF, pqedf | Returns information on available edge types and widths |
| PQEDM, pqedm | Returns the edit mode. |
| PQEDMI, pqedmi | Returns nth element of list of defined data mapping indexes. |
| PQEDP, pqedp | Returns extended edge representation information. |
| PQEDR, pqedr | Returns edge representation information. |
| PQEEDI, pqeedi | Returns number of available edge bundle entries and nth element of list of defined edge indexes. |
| PQEGD3, pqegd3 | Returns nth element of GDP list. |
| PQEGDP, pqegdp | Returns nth element of GDP list. |
| PQEGSE, pqegse | Returns nth element of GSE identifier list. |
| PQEII, pqeii | Returns nth element of list of defined interior indexes and number of interior bundle table entries. |
| PQELSI, pqelsi | Returns nth element of list of defined light source indexes and number of available light source indexes. |
| PQEP, pqep | Returns element pointer value. |
| PQEPAI, pqepai | Returns nth element of list of defined pattern indexes and number of pattern table entries. |
| PQEPLI, pqepli | Returns nth element of list of defined polyline indexes and number of polyline bundle table entries. |
| PQEPMI, pqepmi | Returns nth element of list of defined polymarker indexes and number of polymarker bundle table entries. |
| PQEPSI, pqepsi | Returns nth element of list of defined parametric surface indexes. |
| PQERFI, pqerfi | Returns nth element of list of defined reflectance indexes and number of reflectance bundle table entries. |
| PQERHM, pqerhm | Returns error handling mode value. |
| PQETS, pqets | Returns element type of specified element number. |
| PQETXI, pqetxi | Returns nth element of list of defined text indexes and number of text bundle table entries. |
| PQEVWI, pqevwi | Returns nth element of list of defined view indexes and number of view bundle table entries. |
| PQEWK, pqewk | Returns number of available workstation types and nth element of list of supported workstation types. |
| PQGDP, pqgdp | Returns list of attribute sets associated with 2D GDP identifier. |
| PQGDP3, pqgdp3 | Returns list of attribute sets associated with 3D GDP identifier. |
| PQGSEF, pqgsef | Returns workstation dependency indicators for GSE identifiers. |
| PQHLFT, pqhlft | Returns inclusion and exclusion sets for highlighting. |
| PQHRIF, pqhrif | Returns available HLHSR identifiers. |
| PQHRM, pqhrm | Returns HLHSR state and current and requested HLHSR modes. |
| PQHRMF, pqhrmf | Returns available HLHSR modes. |
| PQIF, pqif | Returns interior and hatch information. |
| PQIFP, pqifp | Returns extended interior and hatch information. |
| PQIP, pqip | Returns front and back interior style and color information. |
| PQIQOV, pqiqov | Queries error state list. |
| PQIR, pqir | Returns interior style and color information. |
| PQIVFT, pqivft | Returns inclusion and exclusion sets for invisibility. |
| PQLCS, pqlcs | Returns information about the locator device state. |
| PQLCS3, pqlcs3 | Returns information about the locator device state. |
| PQLI, pqli | Returns numbers of various logical input devices. |
| PQLSF, pqlsf | Returns light source information. |
| PQLSR, pqlsr | Returns light source type information. |
| PQM3D, pqm3d | Specifies the surface and interior attributes of a 3D quadrilateral mesh. |
| PQMCLF, pqmclf | Returns nth element of list of supported modeling clipping operators and number of operators. |
| PQMD, pqmd | Specifies the surface and interior attributes of a 2D quadrilateral mesh. |
| PQOPST, pqopst | Returns open structure status and structure identifier. |
| PQOPWK, pqopwk | Returns nth element of list of identifiers for open workstations. |
| PQPAF, pqpaf | Returns number of available pattern indexes. |
| PQPAN, pqpan | Returns all paths referencing the structure. |
| PQPAP, pqpap | Returns extended pattern index information. |
| PQPAR, pqpar | Returns pattern index information. |
| PQPCMR, pqpcmr | Returns predefined color mapping type and color data for the index. |
| PQPCR, pqpcr | Returns predefined color triplet of the index. |
| PQPDCR, pqpdcr | Returns predefined depth cue information for the index. |
| PQPDE, pqpde | Returns all paths referenced by the structure. |
| PQPDMR, pqpdmr | Returns predefined data mapping information for the index. |
| PQPEDP, pqpedp | Returns predefined extended edge information for the index. |
| PQPEDR, pqpedr | Returns predefined edge information for the index. |
| PQPHF, pqphf | Returns available character sets, and maximum number of simultaneously open workstations and archive files. |
| PQPIP, pqpip | Returns extended predefined interior style and color information for the interior index. |
| PQPIR, pqpir | Returns predefined interior style and color information for the interior index. |
| PQPKS, pqpks | Returns information about the pick device state. |
| PQPKS3, pqpks3 | Returns information about the pick device state. |
| PQPLF, pqplf | Returns line width and type information. |
| PQPLFP, pqplfp | Returns extended line width and type information. |
| PQPLP, pqplp | Returns extended polyline representation information. |
| PQPLR, pqplr | Returns line type, line width scale, and polyline color index. |
| PQPLSR, pqplsr | Returns predefined light source type and data record for the light source. |
| PQPMF, pqpmf | Returns polymarker information. |
| PQPMP, pqpmp | Returns extended polymarker representation information. |
| PQPMR, pqpmr | Returns marker type, marker size scale, and polymarker color index. |
| PQPOST, pqpost | Returns nth element of list of posted structures and their associated priorities. |
| PQPPAP, pqppap | Returns extended predefined pattern dimension and color array information about the pattern. |
| PQPPAR, pqppar | Returns predefined pattern dimensions and array of color indexes of the pattern. |
| PQPPLP, pqpplp | Returns extended information about the predefined polyline representation of the index. |
| PQPPLR, pqpplr | Returns predefined line type, line width scale, and polyline color index for the index. |
| PQPPMP, pqppmp | Returns extended information about the predefined polymarker representation of the index. |
| PQPPMR, pqppmr | Returns predefined marker type, marker size scale, and polymarker color index for the index. |
| PQPPSR, pqppsr | Returns predefined parametric surface type and data for the index. |
| PQPRFR, pqprfr | Returns predefined reflectance representation information for the index. |
| PQPSF, pqpsf | Returns polynomial surface information. |
| PQPSR, pqpsr | Returns parametric surface representation. |
| PQPTXP, pqptxp | Returns extended information about the predefined text representation of the index. |
| PQPTXR, pqptxr | Returns predefined text representation information for the index. |
| PQPVWR, pqpvwr | Returns predefined view representation information for the index. |
| PQRCMF, pqrcmf | Returns nth element of list of rendering color models and number of available models. |
| PQRFF, pqrff | Returns reflectance information. |
| PQRFR, pqrfr | Returns reflectance representation information for the index. |
| PQSID, pqsid | Returns list of all structure identifiers in CSS. |
| PQSIM, pqsim | Returns value or more simultaneous events flag. |
| PQSKS, pqsks | Returns information about the stroke device state. |
| PQSKS3, pqsks3 | Returns information about the stroke device state. |
| PQSTRS, pqstrs | Returns structure state as closed or open. |
| PQSTS, pqsts | Returns information about the string device state. |
| PQSTS3, pqsts3 | Returns information about the string device state. |
| PQSTST, pqstst | Returns structure status indicator. |
| PQSYS, pqsys | Returns system state as closed or open. |
| PQTCF, pqtcf | Returns trimming curve information. |
| PQTXF, pqtxf | Returns text font information. |
| PQTXP, pqtxp | Returns extended text representation information. |
| PQTXR, pqtxr | Returns text representation information. |
| PQTXX, pqtxx | Returns text extent of a character string. |
| pquad_mesh3_data | Specifies the surface and interior attributes of a 3D quadrilateral mesh. |
| pquad_mesh_data | Specifies the surface and interior attributes of a 2D quadrilateral mesh. |
| PQVLS, pqvls | Returns information about the valuator device state. |
| PQVLS3, pqvls3 | Returns information about the valuator device state. |
| PQVWF, pqvwf | Returns number of predefined view indexes. |
| PQVWR, pqvwr | Returns view representation information. |
| PQWKC, pqwkc | Returns workstation connection and type. |
| PQWKCA, pqwkca | Returns workstation category value. |
| PQWKCL, pqwkcl | Returns workstation classification value. |
| PQWKPO, pqwkpo | Returns nth element of set of workstation identifiers to which the structure is posted. |
| PQWKSL, pqwksl | Returns maximum number of various indexes and bundle table entries. |
| PQWKST, pqwkst | Returns workstation state value as closed or open. |
| PQWKT, pqwkt | Returns workstation transformation information. |
| PQWKT3, pqwkt3 | Returns extended information about workstation transformations. |
| PQWSLP, pqwslp | Returns maximum number of various bundle table entries. |
| PRAST, prast | Retrieves all structures from an open archive file. |
| PRDITM, prditm | Reads the data record of the current metafile item and writes the record to its last argument. |
| pread_item | Reads the data record of the current metafile item and writes the record to its last argument. |
| predraw_all_structs | Redraws the structures, according to the values assigned to various flags. |
| premove_names_set | Removes group names from the current name set. |
| PREPAN, prepan | Returns the maximal paths of ancestors (in the archive file) that are referenced by the archived structure. |
| PREPDE, prepde | Returns the maximal paths of descendants (in the archive file) that are referenced by the archived structure. |
| preq_choice | Prompts for input using the choice-class logical input device specified. |
| preq_loc | Prompts for input using the locator-class logical input device specified. |
| preq_loc3 | Prompts for input using the locator-class logical input device specified. |
| preq_pick | Prompts for input using the pick-class logical input device specified. |
| preq_string | Prompts for input using the string-class logical input device specified. |
| preq_stroke | Prompts for input using the stroke-class logical input device specified. |
| preq_stroke3 | Prompts for input using the stroke-class logical input device specified. |
| preq_val | Prompts for input using the valuator-class logical input device specified. |
| PRES, pres | Removes group names from the current name set. |
| PRESN, presn | Retrieves a list of archived structure networks from an open archive file. |
| PREST, prest | Retrieves a list of archived structures from an archive file. |
| prestore_model_clip_vol | Restores the current modeling clipping volume entry to the value inherited by that structure. |
| pret_all_structs | Retrieves all structures from an open archive file. |
| pret_paths_ances | Returns the maximal paths of ancestors (in the archive file) that are referenced by the archived structure. |
| pret_paths_descs | Returns the maximal paths of descendants (in the archive file) that are referenced by the archived structure. |
| pret_struct_ids | Returns a list of the archived structures in the open archive file. |
| pret_struct_nets | Retrieves a list of archived structure networks from an open archive file. |
| pret_structs | Retrieves a list of archived structures from an archive file. |
| PRMCV, prmcv | Restores the current modeling clipping volume entry to the value inherited by that structure. |
| PRO, pro | Creates a 2D homogeneous transformation matrix used to rotate the axes. |
| protate | Creates a 2D homogeneous transformation matrix used to rotate the axes. |
| protate_x | Creates a 3D homogeneous transformation matrix that executes a rotation about the x-axis. |
| protate_y | Creates a 3D homogeneous transformation matrix that executes a rotation about the y-axis. |
| protate_z | Creates a 3D homogeneous transformation matrix that executes a rotation about the z-axis. |
| PROX, prox | Creates a 3D homogeneous transformation matrix that executes a rotation about the x-axis. |
| PROY, proy | Creates a 3D homogeneous transformation matrix that executes a rotation about the y-axis. |
| PROZ, proz | Creates a 3D homogeneous transformation matrix that executes a rotation about the z-axis. |
| PRQCH, prqch | Prompts for input using the choice-class logical input device specified. |
| PRQLC, prqlc | Prompts for input using the locator-class logical input device specified. |
| PRQLC3, prqlc3 | Prompts for input using the locator-class logical input device specified. |
| PRQPK, prqpk | Prompts for input using the pick-class logical input device specified. |
| PRQSK, prqsk | Prompts for input using the stroke-class logical input device specified. |
| PRQSK3, prqsk3 | Prompts for input using the stroke-class logical input device specified. |
| PRQST, prqst | Prompts for input using the string-class logical input device specified. |
| PRQVL, prqvl | Prompts for input using the valuator-class logical input device specified. |
| PRSID, prsid | Returns a list of the archived structures in the open archive file. |
| PRST, prst | Redraws the structures, according to the values assigned to various flags. |
| psample_choice | Returns the choice number from the choice-class logical input device specified. |
| psample_loc | Returns the 2D coordinates of the locator position from the locator-class logical input device specified. |
| psample_loc3 | Returns the 3D coordinates of the locator position from the locator-class logical input device specified. |
| psample_pick | Returns pick path information from the pick-class logical input device specified. |
| psample_string | Returns the character string from the string-class logical input device specified. |
| psample_stroke | Returns the 2D coordinates of the points in a stroke from the stroke-class logical input device specified. |
| psample_stroke3 | Returns the 3D coordinates of the points in a stroke from the stroke-class logical input device specified. |
| psample_val | Returns the value from the valuator-class logical input device specified. |
| PSANS, psans | Sets the text style for annotation text primitives. |
| PSATAL, psatal | Sets the horizontal and vertical alignment attributes for annotation text. |
| PSATCH, psatch | Sets the text height for annotation text primitives. |
| PSATCU, psatcu | Sets the x and y components of the up vector for annotation text primitives. |
| PSATP, psatp | Sets the annotation text path attribute. |
| PSBDMI, psbdmi | Sets the values of the current back data mapping index entry during structure traversal. |
| PSBDMM, psbdmm | Specifies the back data mapping method for displaying back-facing portions of area primitives. |
| PSBIC, psbic | Specifies the color for displaying back-facing portions of area primitives. |
| PSBII, psbii | Sets the back interior index value. |
| PSBIS, psbis | Specifies the back interior style for drawing back-facing portions of area primitives. |
| PSBISI, psbisi | Specifies the back interior style index for drawing back-facing area primitives. |
| PSBISM, psbism | Specifies the back interior shading method for displaying back-facing portions of area primitives. |
| PSBRFI, psbrfi | Sets the back reflectance index value. |
| PSBRFM, psbrfm | Sets the back reflectance model for displaying back-facing portions of area primitives. |
| PSBRFP, psbrfp | Specifies the surface properties of the back-facing portions of area primitives. |
| PSC, psc | Creates a 2D homogeneous transformation matrix that performs the specified scaling. |
| PSC3, psc3 | Creates a 3D homogeneous transformation matrix that performs the specified scaling. |
| PSCAC, pscac | Indicates the minimum quality desired for the approximation of the curve’s geometry. |
| pscale | Creates a 2D homogeneous transformation matrix that performs the specified scaling. |
| pscale3 | Creates a 3D homogeneous transformation matrix that performs the specified scaling. |
| PSCHH, pschh | Defines the height of an uppercase character in the current font. |
| PSCHM, pschm | Sets the operating mode and echo state of a choice device. |
| PSCHSP, pschsp | Specifies how much space will appear between two adjacent characters. |
| PSCHUP, pschup | Defines the character up vector in terms of x- and y-text local coordinates. |
| PSCHXP, pschxp | Defines character width. |
| PSCMD, pscmd | Assigns a value to the current color model entry in the workstation state list. |
| PSCMI, pscmi | Defines the color mapping index value. |
| PSCMR, pscmr | Associates the color mapping index with the specified parameters. |
| PSCNRS, pscnrs | Sets the value of the archival and retrieval conflict resolution flags. |
| PSCR, pscr | Associates the color index with the color triplet values in the color table. |
| PSDCI, psdci | Specifies the depth cue index value that selects an entry in the workstation depth cue table. |
| PSDCR, psdcr | Associates a depth cue index with related depth cue information. |
| PSDMI, psdmi | Sets the data mapping index value. |
| PSDMM, psdmm | Specifies the data mapping method used to display front-facing portions of area primitives. |
| PSDMR, psdmr | Associates the data mapping index with the specified parameters. |
| PSDUS, psdus | Sets the values specified for the deferral mode and modification mode entries in the workstation state list. |
| PSEDC, psedc | Sets the color used to draw edges of area primitives. |
| PSEDCI, psedci | Creates or redefines an edge color index. |
| PSEDFG, psedfg | Specifies the edge flag value. |
| PSEDI, psedi | Specifies the edge index. |
| PSEDM, psedm | Sets the edit mode in the PHIGS state list entry. |
| PSEDP, psedp | Modifies the entries in the extended edge bundle table. |
| PSEDR, psedr | Defines the attributes of an edge representation. |
| PSEDT, psedt | Sets the edge type value. |
| PSEP, psep | Sets the pointer to the specified value. |
| PSEPLB, pseplb | Positions the element pointer at the next occurrence of the specified label. |
| PSERHM, pserhm | Sets the specified value in the error handling mode entry of the error state list. |
| pset_anno_align | Sets the horizontal and vertical alignment attributes for annotation text. |
| pset_anno_char_ht | Sets the text height for annotation text primitives. |
| pset_anno_char_up_vec | Sets the x and y components of the up vector for annotation text primitives. |
| pset_anno_path | Sets the annotation text path attribute. |
| pset_anno_style | Sets the text style for annotation text primitives. |
| pset_back_data_map_ind | Sets the values of the current back data mapping index entry during structure traversal. |
| pset_back_data_map_method | Specifies the back data mapping method for displaying back-facing portions of area primitives. |
| pset_back_int_colr | Specifies the color for displaying back-facing portions of area primitives. |
| pset_back_int_ind | Sets the back interior index value. |
| pset_back_int_shad_method | Specifies the back interior shading method for displaying back-facing portions of area primitives. |
| pset_back_int_style | Specifies the back interior style for drawing back-facing portions of area primitives. |
| pset_back_int_style_ind | Specifies the back interior style index for drawing back-facing area primitives. |
| pset_back_refl_ind | Sets the back reflectance index value. |
| pset_back_refl_model | Sets the back reflectance model for displaying back-facing portions of area primitives. |
| pset_back_refl_props | Specifies the surface properties of the back-facing portions of area primitives. |
| pset_char_expan | Defines character width. |
| pset_char_ht | Defines the height of an uppercase character in the current font. |
| pset_char_space | Specifies how much space will appear between two adjacent characters. |
| pset_char_up_vec | Defines the character up vector in terms of x- and y-text local coordinates. |
| pset_choice_mode | Sets the operating mode and echo state of a choice device. |
| pset_colr_map_ind | Defines the color mapping index value. |
| pset_colr_map_rep | Associates the color mapping index with the specified parameters. |
| pset_colr_model | Assigns a value to the current color model entry in the workstation state list. |
| pset_colr_rep | Associates the color index with the color triplet values in the color table. |
| pset_conf_res | Sets the value of the archival and retrieval conflict resolution flags. |
| pset_curve_approx_crit | Indicates the minimum quality desired for the approximation of the curve’s geometry. |
| pset_data_map_ind | Sets the data mapping index value. |
| pset_data_map_method | Specifies the data mapping method used to display front-facing portions of area primitives. |
| pset_data_map_rep | Associates the data mapping index with the specified parameters. |
| pset_depth_cue_ind | Specifies the depth cue index value that selects an entry in the workstation depth cue table. |
| pset_depth_cue_rep | Associates a depth cue index with related depth cue information. |
| pset_disp_upd_st | Sets the values specified for the deferral mode and modification mode entries in the workstation state list. |
| pset_edge_colr | Sets the color used to draw edges of area primitives. |
| pset_edge_colr_ind | Creates or redefines an edge color index. |
| pset_edge_flag | Specifies the edge flag value. |
| pset_edge_ind | Specifies the edge index. |
| pset_edge_rep | Defines the attributes of an edge representation. |
| pset_edge_rep_plus | Modifies the entries in the extended edge bundle table. |
| pset_edgetype | Sets the edge type value. |
| pset_edgewidth | Specifies the scale factor to be applied to the workstation’s nominal edge width. |
| pset_edit_mode | Sets the edit mode in the PHIGS state list entry. |
| pset_elem_ptr | Sets the pointer to the specified value. |
| pset_elem_ptr_label | Positions the element pointer at the next occurrence of the specified label. |
| pset_err_hand | Replaces the previous user-specified handler with a new error handler. |
| pset_err_hand_mode | Sets the specified value in the error handling mode entry of the error state list. |
| pset_facet_cull_mode | Sets the facet culling mode attribute to the specified mode. |
| pset_facet_disting_mode | Specifies the facet distinguishing mode. |
| pset_global_tran | Resets the global modeling transformation by specifying a 3 x 3 transformation matrix. |
| pset_global_tran3 | Resets the global modeling transformation by specifying a 4 x 4 transformation matrix. |
| pset_highl_filter | Defines inclusion and exclusion sets of names used to determine whether primitives are highlighted. |
| pset_hlhsr_id | Specifies the identifier value used to control workstation-independent hidden line and hidden surface removal attributes. |
| pset_hlhsr_mode | Specifies the mode value to control hidden line and hidden surface removal attributes. |
| pset_indiv_asf | Sets ASFs for primitive attributes. |
| pset_int_colr | Sets the color used to fill interiors. |
| pset_int_colr_ind | Creates or redefines an interior color index. |
| pset_int_ind | Sets the interior index value. |
| pset_int_rep | Defines the attributes of an interior representation. |
| pset_int_rep_plus | Modifies the entries in the extended interior bundle table. |
| pset_int_shad_method | Specifies the interior shading method. |
| pset_int_style | Specifies the interior style. |
| pset_int_style_ind | Specifies the interior style index for fill area and fill area set primitives. |
| pset_invis_filter | Defines inclusion and exclusion sets of names used to determine whether primitives are invisible. |
| pset_light_source_rep | Defines the attributes of a light source. |
| pset_light_source_st | Specifies the values for the light source activation and light source deactivation lists. |
| pset_line_colr | Specifies the color of a polyline. |
| pset_line_colr_ind | Defines a polyline color index. |
| pset_line_ind | Sets the polyline index value that points to the workstation polyline bundle table. |
| pset_line_rep | Defines the attributes of a polyline representation. |
| pset_line_rep_plus | Modifies the entries in the extended polyline bundle table. |
| pset_line_shad_method | Specifies the polyline shading method. |
| pset_linetype | Specifies the line type value. |
| pset_linewidth | Specifies the scale factor to be applied to the workstation’s nominal line width. |
| pset_loc_mode | Sets the operating mode and echo state of a locator device. |
| pset_local_tran | Resets the local modeling transformation by specifying a 3 x 3 transformation matrix and a composition type. |
| pset_local_tran3 | Resets the local modeling transformation by specifying a 4 x 4 transformation matrix and a composition type. |
| pset_marker_colr | Specifies the color of a polymarker. |
| pset_marker_colr_ind | Defines a polymarker color index. |
| pset_marker_ind | Sets the polymarker index value that points to the workstation polymarker bundle table. |
| pset_marker_rep | Defines the attributes of a polymarker representation. |
| pset_marker_rep_plus | Modifies the entries in the extended polymarker bundle table. |
| pset_marker_size | Specifies the scale factor to be applied to the workstation’s nominal marker size. |
| pset_marker_type | Specifies the marker type. |
| pset_model_clip_ind | Specifies the current modeling clipping indicator entry in the PHIGS traversal state list. |
| pset_model_clip_vol | Specifies the current modeling clipping volume entry in the PHIGS traversal state list. |
| pset_model_clip_vol3 | Specifies the current modeling clipping volume 3 entry in the PHIGS traversal state list. |
| pset_of_fill_area_sets3_data | Specifies the 3D form of the set of fill area sets with data primitive. |
| pset_of_fill_area_sets_data | Specifies the 2D shorthand form of the set of fill area sets with data primitive. |
| pset_param_surf_chars | Sets the value of the current parametric surface characteristics entry in the traversal state list. |
| pset_param_surf_ind | Sets the parametric surface index value. |
| pset_param_surf_rep | Associates the parametric surface index with the specified parameters. |
| pset_pat_ref_point | Sets the geometric attribute current pattern reference point entry in the PHIGS state list. |
| pset_pat_ref_point_vecs | Sets the geometric attributes current pattern reference points 3 and current pattern reference vectors entries in the PHIGS state list. |
| pset_pat_rep | Defines a pattern table index. |
| pset_pat_rep_plus | Defines a pattern table index. |
| pset_pat_size | Specifies the height and width vectors of a pattern. |
| pset_pick_filter | Controls the pickability of the primitive. |
| pset_pick_id | Defines the pick identifier value. |
| pset_pick_mode | Sets the operating mode and echo state of the pick device. |
| pset_refl_ind | Sets the reflectance index value. |
| pset_refl_model | Sets the reflectance model used to display front-facing portions of area primitives. |
| pset_refl_props | Sets the surface properties of the front-facing portions of area primitives. |
| pset_refl_rep | Associates the reflectance index with the specified parameters. |
| pset_rend_colr_model | Sets the rendering color model in which color interpolation occurs. |
| pset_string_mode | Sets the operating mode and echo state of the string device. |
| pset_stroke_mode | Sets the operating mode and echo state of a stroke device. |
| pset_surf_approx_crit | Indicates the minimum quality desired for the approximation of the surface’s geometry. |
| pset_text_align | Controls the position of the text extent parallelogram in relation to the text position. |
| pset_text_colr | Sets the color used to draw text and annotation text primitives. |
| pset_text_colr_ind | Uses a text color index to provide a pointer to the workstation color table. |
| pset_text_font | Selects the specified text font. |
| pset_text_ind | Sets the text index value. |
| pset_text_path | Defines the writing direction of text strings. |
| pset_text_prec | Controls how closely displayed characters adhere to the defined text representation. |
| pset_text_rep | Defines text attributes for a text index. |
| pset_text_rep_plus | Modifies the entries in the extended text bundle table. |
| pset_val_mode | Sets the operating mode and echo state of a valuator device. |
| pset_view_ind | Specifies the view index value. |
| pset_view_rep | Defines an index and the values of its associated entry for the workstation view table. |
| pset_view_rep3 | Defines an index and the values of its associated entry for the workstation view table. |
| pset_view_tran_in_pri | Sets the input priority for a view transformation. |
| pset_ws_vp | Resets the workstation transformation according to 2D viewport limits. |
| pset_ws_vp3 | Resets the workstation transformation according to 3D viewport limits. |
| pset_ws_win | Resets the workstation transformation according to 2D workstation window limits. |
| pset_ws_win3 | Resets the workstation transformation according to 3D workstation window limits. |
| PSEWSC, psewsc | Specifies the scale factor to be applied to the workstation’s nominal edge width. |
| PSFAS3, psfas3 | Specifies the 3D form of the set of fill area sets with data primitive. |
| PSFASD, psfasd | Specifies the 2D shorthand form of the set of fill area sets with data primitive. |
| PSFCM, psfcm | Sets the facet culling mode attribute to the specified mode. |
| PSFDM, psfdm | Specifies the facet distinguishing mode. |
| PSGMT, psgmt | Resets the global modeling transformation by specifying a 3 x 3 transformation matrix. |
| PSGMT3, psgmt3 | Resets the global modeling transformation by specifying a 4 x 4 transformation matrix. |
| PSHLFT, pshlft | Defines inclusion and exclusion sets of names used to determine whether primitives are highlighted. |
| PSHRID, pshrid | Specifies the identifier value used to control workstation-independent hidden line and hidden surface removal attributes. |
| PSHRM, pshrm | Specifies the mode value to control hidden line and hidden surface removal attributes. |
| PSIASF, psiasf | Sets ASFs for primitive attributes. |
| PSIC, psic | Sets the color used to fill interiors. |
| PSICI, psici | Creates or redefines an interior color index. |
| PSII, psii | Sets the interior index value. |
| PSIP, psip | Modifies the entries in the extended interior bundle table. |
| PSIR, psir | Defines the attributes of an interior representation. |
| PSIS, psis | Specifies the interior style. |
| PSISI, psisi | Specifies the interior style index for fill area and fill area set primitives. |
| PSISM, psism | Specifies the interior shading method. |
| PSIVFT, psivft | Defines inclusion and exclusion sets of names used to determine whether primitives are invisible. |
| PSLCM, pslcm | Sets the operating mode and echo state of a locator device. |
| PSLMT, pslmt | Resets the local modeling transformation by specifying a 3 x 3 transformation matrix and a composition type. |
| PSLMT3, pslmt3 | Resets the local modeling transformation by specifying a 4 x 4 transformation matrix and a composition type. |
| PSLN, psln | Specifies the line type value. |
| PSLSR, pslsr | Defines the attributes of a light source. |
| PSLSS, pslss | Specifies the values for the light source activation and light source deactivation lists. |
| PSLWSC, pslwsc | Specifies the scale factor to be applied to the workstation’s nominal line width. |
| PSMCH, psmch | Returns the choice number from the choice-class logical input device specified. |
| PSMCLI, psmcli | Specifies the current modeling clipping indicator entry in the PHIGS traversal state list. |
| PSMCV, psmcv | Specifies the current modeling clipping volume entry in the PHIGS traversal state list. |
| PSMCV3, psmcv3 | Specifies the current modeling clipping volume 3 entry in the PHIGS traversal state list. |
| PSMK, psmk | Specifies the marker type. |
| PSMKSC, psmksc | Specifies the scale factor to be applied to the workstation’s nominal marker size. |
| PSMLC, psmlc | Returns the 2D coordinates of the locator position from the locator-class logical input device specified. |
| PSMLC3, psmlc3 | Returns the 3D coordinates of the locator position from the locator-class logical input device specified. |
| PSMPK, psmpk | Returns pick path information from the pick-class logical input device specified. |
| PSMSK, psmsk | Returns the 2D coordinates of the points in a stroke from the stroke-class logical input device specified. |
| PSMSK3, psmsk3 | Returns the 3D coordinates of the points in a stroke from the stroke-class logical input device specified. |
| PSMST, psmst | Returns a character string from the string-class logical input device specified. |
| PSMVL, psmvl | Returns the value from the valuator-class logical input device specified. |
| PSPA, pspa | Specifies the height and width vectors of a pattern. |
| PSPAP, pspap | Defines a pattern table index. |
| PSPAR, pspar | Defines a pattern table index. |
| PSPARF, psparf | Sets the geometric attribute current pattern reference point entry in the PHIGS state list. |
| PSPKFT, pspkft | Controls the pickability of the primitive. |
| PSPKID, pspkid | Defines the pick identifier value. |
| PSPKM, pspkm | Sets the operating mode and echo state of the pick device. |
| PSPLC, psplc | Specifies the color of a polyline. |
| PSPLCI, psplci | Defines a polyline color index. |
| PSPLI, pspli | Sets the polyline index value that points to the workstation polyline bundle table. |
| PSPLP, psplp | Modifies the entries in the extended polyline bundle table. |
| PSPLR, psplr | Defines the attributes of a polyline representation. |
| PSPLSM, psplsm | Specifies the polyline shading method. |
| PSPMC, pspmc | Specifies the color of a polymarker. |
| PSPMCI, pspmci | Defines a polymarker color index. |
| PSPMI, pspmi | Sets the polymarker index value that points to the workstation polymarker bundle table. |
| PSPMP, pspmp | Modifies the entries in the extended polymarker bundle table. |
| PSPMR, pspmr | Defines the attributes of a polymarker representation. |
| PSPRPV, psprpv | Sets the geometric attributes current pattern reference points 3 and current pattern reference vectors entries in the PHIGS state list. |
| PSPSC, pspsc | Sets the value of the current parametric surface characteristics entry in the traversal state list. |
| PSPSI, pspsi | Sets the parametric surface index value. |
| PSPSR, pspsr | Associates the parametric surface index with the specified parameters. |
| PSRCM, psrcm | Sets the rendering color model in which color interpolation occurs. |
| PSRFI, psrfi | Sets the reflectance index value. |
| PSRFM, psrfm | Sets the reflectance model used to display front-facing portions of area primitives. |
| PSRFP, psrfp | Sets the surface properties of the front-facing portions of area primitives. |
| PSRFR, psrfr | Associates the reflectance index with the specified parameters. |
| PSSAC, pssac | Indicates the minimum quality desired for the approximation of the surface’s geometry. |
| PSSKM, psskm | Sets the operating mode and echo state of a stroke device. |
| PSSTM, psstm | Sets the operating mode and echo state of the string device. |
| PSTXAL, pstxal | Controls the position of the text extent parallelogram in relation to the text position. |
| PSTXC, pstxc | Sets the color used to draw text and annotation text primitives. |
| PSTXCI, pstxci | Uses a text color index to provide a pointer to the workstation color table. |
| PSTXFN, pstxfn | Selects the specified text font. |
| PSTXI, pstxi | Sets the text index value. |
| PSTXP, pstxp | Defines the writing direction of text strings. |
| PSTXPR, pstxpr | Controls how closely displayed characters adhere to the defined text representation. |
| PSTXR, pstxr | Defines text attributes for a text index. |
| PSTXRP, pstxrp | Modifies the entries in the extended text bundle table. |
| PSVLM, psvlm | Sets the operating mode and echo state of a valuator device. |
| PSVTIP, psvtip | Sets the input priority for a view transformation. |
| PSVWI, psvwi | Specifies the view index value. |
| PSVWR, psvwr | Defines an index and the values of its associated entry for the workstation view table. |
| PSVWR3, psvwr3 | Defines an index and the values of its associated entry for the workstation view table. |
| PSWKV, pswkv | Resets the workstation transformation according to 2D viewport limits. |
| PSWKV3, pswkv3 | Resets the workstation transformation according to 3D viewport limits. |
| PSWKW, pswkw | Resets the workstation transformation according to 2D workstation window limits. |
| PSWKW3, pswkw3 | Resets the workstation transformation according to 3D workstation window limits. |
| ptext | Writes and positions a character string (2D form). |
| ptext3 | Writes and positions a character string (3D form). |
| PTP, ptp | Applies a 2D transformation matrix to a point. |
| PTP3, ptp3 | Applies a 3D transformation matrix to a point. |
| PTR, ptr | Creates a 2D homogeneous transformation matrix that performs a translation. |
| PTR3, ptr3 | Creates a 3D homogeneous transformation matrix that performs a translation. |
| ptran_point | Applies a 2D transformation matrix to a point. |
| ptran_point3 | Applies a 3D transformation matrix to a point. |
| ptranslate | Creates a 2D homogeneous transformation matrix that performs a translation. |
| ptranslate3 | Creates a 3D homogeneous transformation matrix that performs a translation. |
| ptri_set3_data | Specifies the 3D form of the triangle set with data primitive. |
| ptri_set_data | Specifies the 2D, shorthand form of the triangle set with data primitive. |
| ptri_strip3_data | Specifies the 3D form of a triangle strip 3 with data primitive. |
| ptri_strip_data | Specifies the 2D, shorthand form of a triangle strip with data primitive. |
| PTS3D, pts3d | Specifies the 3D form of the triangle set with data primitive. |
| PTSD, ptsd | Specifies the 2D, shorthand form of the triangle set with data primitive. |
| PTST3D, ptst3d | Specifies the 3D form of a triangle strip 3 with data primitive. |
| PTSTD, ptstd | Specifies the 2D, shorthand form of a triangle strip with data primitive. |
| PTX, ptx | Writes and positions a character string (2D form). |
| PTX3, ptx3 | Writes and positions a character string (3D form). |
| PTX3S, ptx3s | Writes and positions a character string (3D form). |
| PTXS, ptxs | Writes and positions a character string (2D form). |
| PUCSC, pucsc | Unpacks the color spline curve data for the PBSC3C element or primitive. |
| PUCSS, pucss | Unpacks color spline surface data for the PBSS3D element or primitive. |
| PUDSS, pudss | Unpacks spline surface data for the PBSS3D element or primitive. |
| punpost_all_structs | Unposts all structures from a workstation. |
| punpost_struct | Unposts a structure. |
| PUPAST, pupast | Unposts all structures from a workstation. |
| pupd_ws | Illustrates the effects deferred by the pset_disp_upd_st function. |
| PUPOST, pupost | Unposts a structure. |
| PUREC, purec | Retrieves information from a Fortran data record. |
| PUTC, putc | Unpacks trimming curve data for the PBSS3D element or primitive. |
| PUWK, puwk | Illustrates the effects deferred by the PSDUS function. |
| PWAIT, pwait | Attempts to remove the oldest report from the input queue. |
| PWITM, pwitm | Writes a user-defined data item record to a metafile. |
| pwrite_item | Writes a user-defined data item record to a metafile. |