sony(7) sony(7)
NAME
sony - Sony CDU31A, CDU33A and CDU535 non-SCSI host bus
adapter
DESCRIPTION
The sony host adapter subsystem enables the SCSI target
drivers sc01 to communicate with target controllers and
logical units. This driver implements the Portable Device
Interface (PDI) for the sc01 PDI target driver.
It is also possible to access the SCSI-bus subsystem directly
using the pass-through driver interface. This allows you to
issue sb control blocks directly to the target controller. To
find the appropriate device to use, while any device is being
accessed through the target driver, use the B_GETDEV ioctl to
get the major and minor numbers of the pass-through node.
This node may be created and opened for pass-through use
(SDI_SEND ioctl).
ioctl Calls
The following ioctl(2) commands are supported by this driver:
SDI_SEND
Sends a pass-through command (SCSI control block) to a
target controller, bypassing the associated target
driver.
B_GETTYPE
Returns the bus name and device driver name of a
specific device.
HA_VER
For a 80386-based computer, used to determine the Driver
Interface Version supported by the driver. It returns
the structure ver_no defined in sdi.h.
Files
/usr/include/sys/sony.h
/usr/include/sys/scsi.h
/usr/include/sys/sdi.h
/usr/include/sys/sdi_edt.h
/etc/conf/pack.d/sony/space.c
REFERENCES
ioctl(2), sc01(7)
Copyright 1994 Novell, Inc. Page 1
sony(7) sony(7)
Copyright 1994 Novell, Inc. Page 2