Digital

NAME

cda_msg − CDA run-time messages

DESCRIPTION

CDA run-time messages may be reported while you are converting or viewing a CDA document, or while you are using a CDA application. These messages refer to conditions that range from successful completion of the operation to termination of processing because of a serious error. 

When converting a CDA document, CDA run-time messages are returned to your system’s standard error location (your screen, by default). 

When viewing a CDA document on a workstation, select Diagnostic Information... from the File pull-down menu in the CDA Viewer window to display messages. When viewing a CDA document on a character-cell terminal, CDA run-time messages appear on your screen by default. 

For information on how other CDA applications report CDA run-time messages, consult your application’s message documentation. 

CDA run-time messages consist of a message number and message text. 

The following section lists the CDA run-time messages. A brief explanation and recommended user action follows each message, unless a user action is not required. The messages are listed in alphabetical order, by message name. 

CDA Run-Time Messages

AGGCNT, aggregate type: !AD  Agg count: !ZL
Level: Informational
Explanation: Aggregate type: ’string’ Agg count: ’integer’ This is info on the aggregate name, and the count of the aggregate type.  ALLOCFAIL, memory allocation failure
Level: Error
Explanation: The standard memory allocation procedure failed to allocate dynamic memory.  CLOSEFAIL, close failure
Level: Error
Explanation: The standard close function has failed.  DCVNOTFND, domain converter not found
Level: Error
Explanation: The required domain converter could not be found.  DEFAULT, item present by default
Level: Success
Explanation: The application called CDA$LOCATE_ITEM, which determined that the item was present by default in the input stream.  DEFNOTFOU, definition not found
Level: Error
Explanation: The application called CDA$FIND_DEFINITION referencing an entity that is not defined.  EMPTY, empty item
Level: Error
Explanation: The application called a CDA access procedure referencing an item that is empty.  ENDOFDOC, end of document
Level: Error
Explanation: The application called CDA$GET_AGGREGATE, which determined that no more aggregates exist in the document.  ENDOFSEQ, end of sequence
Level: Error
Explanation: The application called CDA$NEXT_AGGREGATE referencing an aggregate that was at the end of a sequence.  ERRINPLOG, error messages produced during, input conversion, see error log
Level: Error
Explanation: The input conversion did not complete and some error messages were produced. 
User Action: Refer to the error log for more details.  ERROUTLOG, error messages produced during, output conversion, see error log
Level: Error
Explanation: The output conversion did not complete and some error messages were produced. 
User Action: Refer to the error log for more details.  FILESPEC, missing filespec
Level: Informational
Explanation: Missing filespec: ’filespec’ This is the name of the missing filespec.  FLTTRN, floating-point truncation
Level: Error
Explanation: During CDA$LOCATE_ITEM for a general floating-point value, floating truncation occurred.  ICVNOTFND, input converter not found
Level: Error
Explanation: The specified input converter could not be found.  INDEX, index out of range
Level: Error
Explanation: The application called CDA$LOCATE_ITEM, CDA$STORE_ITEM, or CDA$ERASE_ITEM referencing an array-valued item, but the index is out of range.  INFINPLOG, informational messages produced during, input conversion, see error log
Level: Informational
Explanation: The input conversion completed but some informational messages were produced. 
User Action: Refer to the error log for more details.  INFOUTLOG, informational messages produced during, output conversion, see error log
Level: Informational
Explanation: The output conversion completed but some informational messages were produced. 
User Action: Refer to the error log for more details.  INHERIT, item present by inheritance
Level: Success
Explanation: The application called CDA$LOCATE_ITEM, which determined that the item was present by inheritance in the input stream.  INTERR, internal error
Level: Fatal
Explanation: The CDA Toolkit detected an internal error.  INVADDINF, invalid additional information
Level: Error
Explanation: The add-info parameter in a call to CDA$LOCATE_ITEM or CDA$STORE_ITEM is invalid.  INVAGGCTX, invalid aggregate context
Level: Error
Explanation: The user called PUT AGGREGATE, PUT DOCUMENT, or ENTER SCOPE with an aggregate that is invalid in its context in the document INVAGGTYP, invalid aggregate type
Level: Error
Explanation: The application called a CDA access procedure referencing an aggregate type code that is undefined, or an aggregate that has an undefined type code.  INVBUFLEN, invalid buffer length
Level: Error
Explanation: The application called CDA$_STORE_ITEM referencing an item that is required to have a specified buffer length. The value of the buffer length parameter is not the required value.  INVDATLEN, invalid data length
Level: Error
Explanation: The length of the value data exceeded the specified length for the data type.  INVDOC, invalid document syntax
Level: Error
Explanation: The CDA access procedures determined that the document contains invalid syntax.  INVFLTVAL, invalid floating-point value
Level: Error
Explanation: A floating-point datum has a reserved value.  INVFUNCOD, invalid function code
Level: Error
Explanation: The application called CDA$CONVERT with an invalid function code.  INVINPDMN, invalid input domain
Level: Error
Explanation: An invalid input domain was specified for the front end. Only DDIF and DTIF are supported as domains.  INVINSERT, invalid insert
Level: Error
Explanation: The application called CDA$INSERT_AGGREGATE or CDA$STORE_ITEM referencing an aggregate that was already part of a sequence, but was not the first aggregate of the sequence.  INVITMCOD, invalid item code
Level: Error
Explanation: The application called a CDA access procedure referencing an aggregate item code that is not defined.  INVITMLST, invalid item list
Level: Error
Explanation: The application called CDA$OPEN_FILE or CDA$CREATE_ROOT_AGGREGATE with a processing options item list that contained an invalid item.  INVOPTION, invalid converter option
Level: Error
Explanation: An invalid option was specified for the converter. 
User Action: Refer to the documentation for this converter to see the valid options.  INVOUTDMN, invalid output domain
Level: Error
Explanation: An invalid output domain was specified for the back end. Only DDIF and DTIF are supported as domains.  INVSCOCOD, invalid scope code
Level: Error
Explanation: The application called CDA$ENTER_SCOPE or CDA$LEAVE_SCOPE referencing a scope code that is not defined or invalid in following correct document scoping rules.  INVSCOTRAN, invalid scope transition
Level: Error
Explanation: The application made a call to CDA$ENTER_SCOPE or CDA$LEAVE_SCOPE that did not follow correct scoping rules.  INVSTSCOD, invalid status code
Level: Error
Explanation: The specified status code’s associated message could not be found.  INVTAGCOD, invalid tag code
Level: Error
Explanation: The application called CDA$_STORE_ITEM referencing an item that has a special tag encoding, but the value of the add-info parameter is not defined for the item.  ITMAGGCNT, aggregate item code: !ZL Aggregate type: !AD Agg count: !ZL
Level: Informational
Explanation: Aggregate item code: ’integer’ Aggregate type: ’string’ Agg count: ’integer’ This is info on an item missing, aggregate name, and the count of the aggregate type.  MISEXTREF, external reference file missing or could not be read
Level: Warning
Explanation: An external reference file is missing or could not be read.  A document’s external reference could not be found, read, or processed.  MISSTYGDE, style guide file missing or could not be read
Level: Warning
Explanation: Style guide file missing or could not be read.  A document’s external style guide could not be found, read, or processed.  NORMAL, normal successful completion
Level: Success
Explanation: The specified action has been successfully completed.  OCVNOTFND, output converter not found
Level: Error
Explanation: The specified output converter could not be found.  OPENFAIL, open failure
Level: Error
Explanation: The standard open function has failed.  READFAIL, read failure
Level: Error
Explanation: The standard read function has failed.  READONLY, aggregate is read-only
Level: Error
Explanation: The application requested input processing options that require an aggregate to be read-only. The application attempted to write or delete the aggregate.  REQITMMIS, required item missing
Level: Error
Explanation: The user called PUT AGGREGATE, PUT DOCUMENT, or ENTER SCOPE with an aggregate that contains an item which is required, but empty.  STYGDEFBK, fallback to non-locale-specific style guide: !AD>/FAO_COUNT=1
Level: Informational
Explanation: Fallback to non-locale-specific style guide: ’filespec’.  Since the locale-specific style guide could not be found, the non-locale-specific version of the style guide was used instead.  SUSPEND, converter is suspended
Level: Success
Explanation: The application called CDA$CONVERT, which determined that the back end suspended conversion. This message can only be returned by the CDA viewer.  TYPEREF, reference to undefined type name
Level: Informational
Explanation: The definition of type typeref was not found.  UNRECENC, Unrecognized encodings skipped
Level: Success, Informational
Explanation: This success status is returned by the GET AGGREGATE and GET DOCUMENT routines if unrecognized data in the input encoding is skipped.  This informational status is logged to the common message log by the bundled DDIF and DTIF converter front ends if data is skipped during the reading within the front-end conversion.  UNSUPCNV, unsupported document conversion
Level: Error
Explanation: The input and output document formats are incompatible for conversion.  UNSUPFMT, unsupported document format
Level: Error
Explanation: The application called CDA$CONVERT with an unsupported document format name. The document format name may be misspelled, or the required conversion module may not be installed.  VAREMPTY, empty variant item (OBSOLETE)
Level: Error
Explanation: The application called CDA$LOCATE_ITEM, CDA$STORE_ITEM, or CDA$ERASE_ITEM referencing an item that has a variable data type. The item that specifies the data type is empty.  VARINDEX, variant index out of range (OBSOLETE)
Level: Error
Explanation: The application called CDA$LOCATE_ITEM, CDA$STORE_ITEM, or CDA$ERASE_ITEM referencing an array-valued item that has a variable data type, but the index is out of range for the item that specifies the data type.  VARVALUE, variant value out of range
Level: Error
Explanation: The application called CDA$LOCATE_ITEM, CDA$STORE_ITEM, or CDA$ERASE_ITEM referencing an item that has a variable data type, but the item that specifies the data type has an invalid value.  VERSKEW, major version skew between, input file and CDA Toolkit
Level: Error
Explanation: The file’s major version is different from the Toolkit’s.  Thus, the Toolkit cannot properly process the file.  WRITFAIL, write failure
Level: Error
Explanation: The standard write function has failed. 

RELATED INFORMATION

cdoc(1), ctod(1), ddifanls(1), ddifps(1), ddiftext(1), dtifanls(1), dtifddif(1), dtoc(1), dxvdoc(1X), textddif(1), vdoc(1), cda(4), cda_msg(4), ddif(4), ddis(4), dtif(4), dvr_msg(4)