sccs(1) (BSD Compatibility Package) sccs(1)
NAME
sccs - front end for the Source Code Control System (SCCS)
SYNOPSIS
/usr/ucb/sccs [ -r ] [ -dprefixpath ] [ -pfinalpath ]
command [SCCS-flags ...] [filename ...]
DESCRIPTION
The sccs command is a front end to the utility programs of the Source
Code Control System (SCCS).
sccs normally prefixes each filename, or the last component of each
filename, with the string `SCCS/s.', because you normally keep your
SCCS database files in a directory called SCCS, and each database
file starts with an `s.' prefix. If the environment variable
PROJECTDIR is set, and is an absolute pathname (that is, begins with
a slash) sccs will search for SCCS files in the directory given by
that variable. If it is a relative pathname (that is, does not begin
with a slash), it is treated as the name of a user, and sccs will
search in that user's home directory for a directory named src or
source. If that directory is found, sccs will search for SCCS files
in the directory given by that variable.
sccs program options must appear before the command argument. Flags
to be passed to the actual SCCS command (utility program) must appear
after the command argument. These flags are specific to the command
being used.
sccs also includes the capability to run ``set user ID'' to another
user to provide additional protection. Certain commands (such as
admin(1)) cannot be run ``set user ID'' by all users, since this
would allow anyone to change the authorizations. Such commands are
always run as the real user.
OPTIONS
-r Run sccs as the real user rather than as whatever effective
user sccs is ``set user ID'' to.
-dprefixpath
Define the prefix portion of the pathname for the SCCS database
files. The default prefix portion of the pathname is the
current directory. prefixpath is prefixed to the entire
pathname. See EXAMPLE.
This flag overrides any directory specified by the PROJECTDIR
environment variable.
-pfinalpath
Define the name of a lower directory in which the SCCS files
will be found; SCCS is the default. finalpath is appended
before the final component of the pathname. See EXAMPLE.
8/91 Page 1
sccs(1) (BSD Compatibility Package) sccs(1)
USAGE
Additional sccs Commands
Several ``pseudo-commands'' are available in addition to the usual
SCCS commands. These are:
create create is used when creating new s. files. For example,
given a C source language file called `obscure.c', create
would perform the following actions: (1) create the `s.'
file called `s.obscure.c' in the SCCS directory; (2)
rename the original source file to `,obscure.c'; (3) do
an `sccs get' on `obscure.c'. Compared to the SCCS admin
command, create does more of the startup work for you and
should be used in preference to admin.
enter enter is just like create, except that it does not do the
final `sccs get'. It is usually used if an `sccs edit'
is to be performed immediately after the enter.
edit Get a file for editing.
delget Perform a delta on the named files and then get new
versions. The new versions have ID keywords expanded,
and so cannot be edited.
deledit Same as delget, but produces new versions suitable for
editing. deledit is useful for making a ``checkpoint''
of your current editing phase.
fix Remove the named delta, but leaves you with a copy of the
delta with the changes that were in it. fix must be
followed by a -r flag. fix is useful for fixing small
compiler bugs, etc. Since fix does not leave audit
trails, use it carefully.
clean Remove everything from the current directory that can be
recreated from SCCS files. clean checks for and does not
remove any files being edited. If `clean -b' is used,
branches are not checked to see if they are currently
being edited. Note: -b is dangerous if you are keeping
the branches in the same directory.
unedit ``Undo'' the last edit or `get -e' and return a file to
its previous condition. If you unedit a file being
edited, all changes made since the beginning of the
editing session are lost.
info Display a list of all files being edited. If the -b flag
is given, branches (that is, SID's with two or fewer
components) are ignored. If the -u flag is given (with
an optional argument), only files being edited by you (or
the named user) are listed.
Page 2 8/91
sccs(1) (BSD Compatibility Package) sccs(1)
check Check for files currently being edited, like info, but
returns an exit code rather than a listing: nothing is
printed if nothing is being edited, and a non-zero exit
status is returned if anything is being edited. check
may thus be included in an ``install'' entry in a
makefile, to ensure that everything is included in an
SCCS file before a version is installed.
tell Display a list of files being edited on the standard
output. Filenames are separated by NEWLINE characters.
Take the -b and -u flags like info and check.
diffs Compare (in diff-like format) the current version of the
program you have out for editing and the versions in SCCS
format. diffs accepts the same arguments as diff, except
that the -c flag must be specified as -C instead, because
the -c flag is taken as a flag to get indicating which
version is to be compared with the current version.
print Print verbose information about the named files. print
does an `sccs prs -e' followed by an `sccs get -p -m' on
each file.
EXAMPLE
The command:
sccs -d/usr/include get sys/inode.h
converts to:
get /usr/include/sys/SCCS/s.inode.h
The intent here is to create aliases such as:
alias syssccs sccs -d/usr/src
which will be used as:
syssccs get cmd/who.c
The command:
sccs -pprivate get usr/include/stdio.h
converts to:
get usr/include/private/s.stdio.h
To put a file called myprogram.c into SCCS format for the first time,
assuming also that there is no SCCS directory already existing:
8/91 Page 3
sccs(1) (BSD Compatibility Package) sccs(1)
$ mkdir SCCS
$ sccs create myprogram.c
$ myprogram.c:
1.1
14 lines
after you have verified that everything is all right
you remove the version of the file that starts with a comma:
$ rm myprogram.c
$
To get a copy of myprogram.c for editing, edit that file, then place
it back in the SCCS database:
$ sccs edit myprogram.c
1.1
new delta 1.2
14 lines
$ vi myprogram.c
your editing session
$ sccs delget myprogram.c
comments? Added abusive responses for compatibility
1.2
7 inserted
7 deleted
7 unchanged
1.2
14 lines
$
To get a file from another directory:
sccs -p/usr/src/sccs/ get cc.c
or:
sccs get /usr/src/sccs/cc.c
To make a delta of a large number of files in the current directory:
sccs delta *.c
To get a list of files being edited that are not on branches:
sccs info -b
To delta everything that you are editing:
$ sccs delta `sccs tell -u`
Page 4 8/91
sccs(1) (BSD Compatibility Package) sccs(1)
In a makefile, to get source files from an SCCS file if it does not
already exist:
SRCS = <list of source files>
$(SRCS):
sccs get $(REL) $@
Regular sccs Commands
The ``regular'' SCCS commands are described very briefly below. It
is unlikely that you ever need to use these commands because the user
interface is so complicated, and the sccs front end command does
99.9% of the interesting tasks for you.
admin Create new SCCS files and changes parameters of existing
SCCS files. You can use `sccs create' to create new SCCS
files, or use `sccs admin' to do other things.
cdc Change the commentary material in an SCCS delta.
comb Combine SCCS deltas and reconstructs the SCCS files.
delta Permanently introduces changes that were made to a file
previously retrieved using `sccs get'. You can use `sccs
delget' as the more useful version of this command since
`sccs delget' does all of the useful work and more.
get Extract a file from the SCCS database, either for
compilation, or for editing when the -e option is used.
Use `sccs get' if you really need it, but `sccs delget'
will normally have done this job for you. Use sccs edit
instead of get with the -e option.
help Supposed to help you interpret SCCS error messages.
prs Display information about what is happening in an SCCS
file.
rmdel Remove a delta from an SCCS file.
sccsdiff Compare two versions of an SCCS file and generates the
differences between the two versions.
val Determine if a given SCCS file meets specified criteria.
If you use the sccs command, you should not need to use
val, because its user interface is unbelievable.
what Display SCCS identification information.
FILES
8/91 Page 5
sccs(1) (BSD Compatibility Package) sccs(1)
/usr/sccs/*
SEE ALSO
admin(1), cdc(1), comb(1), delta(1), get(1), help(1), prs(1),
rmdel(1), sact(1), sccsdiff(1), unget(1), val(1), what(1).
sccsfile(5) in the Programmer's Reference Manual.
NOTES
The help command usually just parrots SCCS error messages and is
generally not considered very helpful.
Page 6 8/91