admin(1) (Source Code Control System Utilities) admin(1)
NAME
admin - create and administer SCCS files
SYNOPSIS
admin [-n] [-i[name]] [-rrel] [-t[name]] [-fflag[flag-val]]
[-dflag[flag-val]] [-alogin] [-elogin] [-m[mrlist]]
[-y[comment]] [-h] [-z] files
DESCRIPTION
admin is used to create new SCCS files and change parameters of
existing ones. Arguments to admin, which may appear in any order,
consist of keyletter arguments (that begin with -) and named files
(note that SCCS file names must begin with the characters s.). If a
named file does not exist, it is created and its parameters are
initialized according to the specified keyletter arguments.
Parameters not initialized by a keyletter argument are assigned a
default value. If a named file does exist, parameters corresponding
to specified keyletter arguments are changed, and other parameters
are left unchanged.
If a directory is named, admin behaves as though each file in the
directory were specified as a named file, except that non-SCCS files
(last component of the path name does not begin with s.) and
unreadable files are silently ignored. If a name of - is given, the
standard input is read; each line of the standard input is taken to
be the name of an SCCS file to be processed. Again, non-SCCS files
and unreadable files are silently ignored.
The keyletter arguments are listed below. Each argument is explained
as if only one named file were to be processed because the effect of
each argument applies independently to each named file.
-n This keyletter indicates that a new SCCS file is to be
created.
-i[name] The name of a file from which the text for a new SCCS
file is to be taken. The text constitutes the first
delta of the file (see -r keyletter for delta numbering
scheme). If the -i keyletter is used, but the file
name is omitted, the text is obtained by reading the
standard input until an end-of-file is encountered. If
this keyletter is omitted, then the SCCS file is
created empty. Only one SCCS file may be created by an
admin command on which the i keyletter is supplied.
Using a single admin to create two or more SCCS files
requires that they be created empty (no -i keyletter).
Note that the -i keyletter implies the -n keyletter.
-rrel The release into which the initial delta is inserted.
This keyletter may be used only if the -i keyletter is
also used. If the -r keyletter is not used, the
8/91 Page 1
admin(1) (Source Code Control System Utilities) admin(1)
initial delta is inserted into release 1. The level of
the initial delta is always 1 (by default initial
deltas are named 1.1).
-t[name] The name of a file from which descriptive text for the
SCCS file is to be taken. If the -t keyletter is used
and admin is creating a new SCCS file (the -n and/or -i
keyletters also used), the descriptive text file name
must also be supplied. In the case of existing SCCS
files: (1) a -t keyletter without a file name causes
removal of descriptive text (if any) currently in the
SCCS file, and (2) a -t keyletter with a file name
causes text (if any) in the named file to replace the
descriptive text (if any) currently in the SCCS file.
-fflag This keyletter specifies a flag, and, possibly, a value
for the flag, to be placed in the SCCS file. Several
-f keyletters may be supplied on a single admin command
line. The allowable flags and their values are:
b Allows use of the -b keyletter on a get command to
create branch deltas.
cceil The highest release (i.e., ceiling): a number
greater than 0 but less than or equal to 9999 that
may be retrieved by a get command for editing.
The default value for an unspecified c flag is
9999.
ffloor The lowest release (i.e., floor): a number
greater than 0 but less than 9999 that may be
retrieved by a get command for editing. The
default value for an unspecified f flag is 1.
dSID The default delta number (SID) to be used by a get
command.
i[str] Causes the No id keywords (ge6) message issued by
get or delta to be treated as a fatal error. In
the absence of this flag, the message is only a
warning. The message is issued if no SCCS
identification keywords [see get(1)] are found in
the text retrieved or stored in the SCCS file. If
a value is supplied, the keywords must exactly
match the given string. The string must contain a
keyword, and no embedded newlines.
j Allows concurrent get commands for editing on the
same SID of an SCCS file. This flag allows
multiple concurrent updates to the same version of
the SCCS file.
Page 2 8/91
admin(1) (Source Code Control System Utilities) admin(1)
llist A list of releases to which deltas can no longer
be made (get -e against one of these "locked"
releases fails). The list has the following
syntax:
<list> ::= <range> | <list> , <range>
<range> ::= RELEASE NUMBER | a
The character a in the list is equivalent to
specifying all releases for the named SCCS file.
n Causes delta to create a null delta in each of
those releases (if any) being skipped when a delta
is made in a new release (e.g., in making delta
5.1 after delta 2.7, releases 3 and 4 are
skipped). These null deltas serve as anchor
points so that branch deltas may later be created
from them. The absence of this flag causes
skipped releases to be non-existent in the SCCS
file, preventing branch deltas from being created
from them in the future.
qtext User-definable text substituted for all
occurrences of the %Q% keyword in SCCS file text
retrieved by get.
mmod module name of the SCCS file substituted for all
occurrences of the %M% keyword in SCCS file text
retrieved by get. If the m flag is not specified,
the value assigned is the name of the SCCS file
with the leading s. removed.
ttype type of module in the SCCS file substituted for
all occurrences of %Y% keyword in SCCS file text
retrieved by get.
v[pgm] Causes delta to prompt for Modification Request
(MR) numbers as the reason for creating a delta.
The optional value specifies the name of an MR
number validity checking program [see delta(1)].
This program will receive as arguments the module
name, the value of the type flag (see ttype
above), and the mrlist. (If this flag is set when
creating an SCCS file, the m keyletter must also
be used even if its value is null).
-dflag Causes removal (deletion) of the specified flag from an
SCCS file. The -d keyletter may be specified only when
processing existing SCCS files. Several -d keyletters
may be supplied in a single admin command. See the -f
keyletter for allowable flag names.
8/91 Page 3
admin(1) (Source Code Control System Utilities) admin(1)
(llist used with -d indicates a list of releases to be
unlocked. See the -f keyletter for a description of
the l flag and the syntax of a list.)
-alogin A login name, or numerical UNIX System group ID, to be
added to the list of users who may make deltas
(changes) to the SCCS file. A group ID is equivalent
to specifying all login names common to that group ID.
Several a keyletters may be used on a single admin
command line. As many logins or numerical group IDs as
desired may be on the list simultaneously. If the list
of users is empty, then anyone may add deltas. If
login or group ID is preceded by a ! they are to be
denied permission to make deltas.
-elogin A login name, or numerical group ID, to be erased from
the list of users allowed to make deltas (changes) to
the SCCS file. Specifying a group ID is equivalent to
specifying all login names common to that group ID.
Several -e keyletters may be used on a single admin
command line.
-m[mrlist] The list of Modification Requests (MR) numbers is
inserted into the SCCS file as the reason for creating
the initial delta in a manner identical to delta. The
v flag must be set and the MR numbers are validated if
the v flag has a value (the name of an MR number
validation program). Diagnostics will occur if the v
flag is not set or MR validation fails.
-y[comment] The comment text is inserted into the SCCS file as a
comment for the initial delta in a manner identical to
that of delta. Omission of the -y keyletter results in
a default comment line being inserted.
The -y keyletter is valid only if the -i and/or -n
keyletters are specified (i.e., a new SCCS file is
being created).
-h Causes admin to check the structure of the SCCS file
[see sccsfile(4)], and to compare a newly computed
check-sum (the sum of all the characters in the SCCS
file except those in the first line) with the check-sum
that is stored in the first line of the SCCS file.
Appropriate error diagnostics are produced. This
keyletter inhibits writing to the file, nullifying the
effect of any other keyletters supplied; therefore, it
is only meaningful when processing existing files.
Page 4 8/91
admin(1) (Source Code Control System Utilities) admin(1)
-z The SCCS file check-sum is recomputed and stored in the
first line of the SCCS file (see -h, above). Note that
use of this keyletter on a truly corrupted file may
prevent future detection of the corruption.
The last component of all SCCS file names must be of the form s.file.
New SCCS files are given mode 444 [see chmod(1)]. Write permission
in the pertinent directory is, of course, required to create a file.
All writing done by admin is to a temporary x-file, called x.file,
[see get(1)], created with mode 444 if the admin command is creating
a new SCCS file, or with the same mode as the SCCS file if it exists.
After successful execution of admin, the SCCS file is removed (if it
exists), and the x-file is renamed with the name of the SCCS file.
This renaming process ensures that changes are made to the SCCS file
only if no errors occurred.
It is recommended that directories containing SCCS files be mode 755
and that SCCS files themselves be mode 444. The mode of the
directories allows only the owner to modify SCCS files contained in
the directories. The mode of the SCCS files prevents any
modification at all except by SCCS commands.
admin also makes use of a transient lock file (called z.file), which
is used to prevent simultaneous updates to the SCCS file by different
users. See get(1) for further information.
FILES
x-file [see delta(1)]
z-file [see delta(1)]
bdiff Program to compute differences between the ``gotten''
file and the g-file [see get(1)].
EXAMPLE
admin -ifile1 s.file1
Creates a new file in SCCS format named s.file1 from file1.
SEE ALSO
bdiff(1), ed(1), delta(1), get(1), help(1), prs(1), what(1),
sccsfile(4).
DIAGNOSTICS
Use the help command for explanations.
NOTES
If it is necessary to patch an SCCS file for any reason, the mode may
be changed to 644 by the owner allowing use of a text editor. You
must run admin -h on the edited file to check for corruption followed
by an admin -z to generate a proper check-sum. Another admin -h is
recommended to ensure the SCCS file is valid.
8/91 Page 5