JILT(1prom)         RISC/os Reference Manual          JILT(1prom)



NAME
     jilt - set jilt bits in Control Misc register

SYNOPSIS
     jilt 0x|0X jilt_value

AVAILABILITY
     This command is available only on RC6380 systems.

DESCRIPTION
     jilt is a PROM monitor or standalone shell (sash(1M)) com-
     mand that sets the jilt bits (18 through 22) in the Control
     Misc register. Use jilt_value (preceded by either 0x or 0X)
     to specify the jilt value, which can range from 00 to 1F
     hexadecimal. For example, enter the following command to
     change the jilt value to 1A:
          jilt 0x1A

CAUTIONS
     Changing the jilt bits can have catastrophic results. Do not
     attempt to use the jilt command unless you are thoroughly
     familiar with how the jilt bits affect computer operations.
     This command is intended for system maintenance only.

SEE ALSO
     prom(1prom), sash(1M)


























                        Printed 11/19/92                   Page 1