hty_load(1M) — mips UMIPS RISC/os 5.01



htyload(1M)        RISC/os Reference Manual         htyload(1M)



NAME
     hty_load - build and load the HPS driver configuration from
          a driver configuration file

SYNOPSIS
     htyload [df] [device_name] [config_file name]

DESCRIPTION
     htyload builds and loads the HPS driver configuration from
     a driver configuration file.  The defaults are /dev/rhp0 for
     the device name and hty_config in the /etc directory for the
     driver configuration file name.

OPTIONS
     The following options may be selected:

     d    Set the device file name by allowing the user to over-
          ride the default HPS device name of /dev/rhp0.  If this
          option is selected, the overriding device name must be
          specified in the device_name parameter on the command
          line.

     f    Set the driver configuration file name by allowing the
          user to override the default configuration file
          /etc/hty_config.

EXAMPLES
     To load the system configuration to iHPS 1 and use the
     default driver configuration file:

          htyload d /dev/rhp1

     To load the system configuration to HP 1 and use an alter-
     nate driver configuration file:

          htyload f /etc/htyconfig1

     htyload does not distinguish ports on a cluster controller
     configured as serial printer ports, but assumes that a con-
     figuration with a port count of 9 or 17 includes a parallel
     printer port.














                        Printed 11/19/92                   Page 1
Museum
