LS(1) RISC/os Reference Manual LS(1)
NAME
ls - list contents of directory
SYNOPSIS
ls [-RadLCxmlnogrtucpFbqisf] [names]
DESCRIPTION
For each directory argument, ls lists the contents of the
directory; for each file argument, ls repeats its name and
any other information requested. The output is sorted
alphabetically by default. When no argument is given, the
current directory is listed. When several arguments are
given, the arguments are first sorted appropriately, but
file arguments appear before directories and their contents.
There are three major listing formats. The default format
for output directed to a terminal is multi-column with
entries sorted down the columns. The -1 option allows sin-
gle column output and -m enables stream output format. In
order to determine output formats for the -C, -x, and -m
options, ls uses an environment variable, COLUMNS, to deter-
mine the number of character positions available on one out-
put line. If this variable is not set, the terminfo(4)
database is used to determine the number of columns, based
on the environment variable TERM. If this information cannot
be obtained, 80 columns are assumed.
The ls command has the following options:
-R Recursively list subdirectories encountered.
-a List all entries, including those that begin with a dot
(.), which are normally not listed.
-d If an argument is a directory, list only its name (not
its contents); often used with -l to get the status of
a directory.
-L If an argument is a symbolic link, list the file or
directory the link references rather than the link
itself.
-C Multi-column output with entries sorted down the
columns. This is the default output format.
-x Multi-column output with entries sorted across rather
than down the page.
-m Stream output format; files are listed across the page,
separated by commas.
-l List in long format, giving mode, number of links,
Printed 11/19/92 Page 1
LS(1) RISC/os Reference Manual LS(1)
owner, group, size in bytes, and time of last modifica-
tion for each file (see below). If the file is a spe-
cial file, the size field instead contains the major
and minor device numbers rather than a size. If the
file is a symbolic link, the filename is printed fol-
lowed by ``->'' and the pathname of the referenced
file.
-n The same as -l, except that the owner's UID and group's
GID numbers are printed, rather than the associated
character strings.
-o The same as -l, except that the group is not printed.
-g The same as -l, except that the owner is not printed.
-r Reverse the order of sort to get reverse alphabetic or
oldest first as appropriate.
-t Sort by time stamp (latest first) instead of by name.
The default is the last modification time. (See -n and
-c.)
-u Use time of last access instead of last modification
for sorting (with the -t option) or printing (with the
-l option).
-c Use time of last modification of the i-node (file
created, mode changed, etc.) for sorting (-t) or print-
ing (-l).
-p Put a slash (/) after each filename if the file is a
directory.
-F Put a slash (/) after each filename if the file is a
directory, an asterisk (*) if the file is an execut-
able, and an ampersand (@) if the file is a symbolic
link.
-b Force printing of non-printable characters to be in the
octal \ddd notation.
-q Force printing of non-printable characters in file
names as the character question mark (?).
-i For each file, print the i-node number in the first
column of the report.
-s Give size in blocks, including indirect blocks, for
each entry.
-f Force each argument to be interpreted as a directory
Page 2 Printed 11/19/92
LS(1) RISC/os Reference Manual LS(1)
and list the name found in each slot. This option
turns off -l, -t, -s, and -r, and turns on -a; the
order is the order in which entries appear in the
directory.
-1 Print one entry per line of output.
The mode printed under the -l option consists of ten charac-
ters. The first character may be one of the following:
d the entry is a directory;
l the entry is a symbolic link;
b the entry is a block special file;
c the entry is a character special file;
p the entry is a fifo (a.k.a. ``named pipe'') special
file;
- the entry is an ordinary file.
The next 9 characters are interpreted as three sets of three
bits each. The first set refers to the owner's permissions;
the next to permissions of others in the user-group of the
file; and the last to all others. Within each set, the
three characters indicate permission to read, to write, and
to execute the file as a program, respectively. For a
directory, ``execute'' permission is interpreted to mean
permission to search the directory for a specified file.
ls -l (the long list) prints its output as follows:
-rwxrwxrwx 1 smith dev 10876 May 16 9:42 part2
Reading from right to left, you see that the current direc-
tory holds one file, named part2. Next, the last time that
file's contents were modified was 9:42 A.M. on May 16. The
file contains 10,876 characters, or bytes. The owner of the
file, or the user, belongs to the group dev (perhaps indi-
cating ``development''), and his or her login name is smith.
The number, in this case 1, indicates the number of links to
file part2; see cp(1). Finally, the dash and letters tell
you that user, group, and others have permissions to read,
write, and execute part2.
The execute (x) symbol here occupies the third position of
the three-character sequence. A - in the third position
would have indicated a denial of execution permissions.
The permissions are indicated as follows:
r the file is readable
w the file is writable
x the file is executable
- the indicated permission is not granted
Printed 11/19/92 Page 3
LS(1) RISC/os Reference Manual LS(1)
l mandatory locking occurs during access (the set-
group-ID bit is on and the group execution bit is
off)
s the set-user-ID or set-group-ID bit is on, and the
corresponding user or group execution bit is also
on
S undefined bit-state (the set-user-ID bit is on and
the user execution bit is off)
t the 1000 (octal) bit, or sticky bit, is on [see
chmod(1)], and execution is on
T the 1000 bit is turned on, and execution is off
(undefined bit-state)
For user and group permissions, the third position is some-
times occupied by a character other than x or -. s also may
occupy this position, referring to the state of the set-ID
bit, whether it be the user's or the group's. The ability
to assume the same ID as the user during execution is, for
example, used during login when you begin as root but need
to assume the identity of the user you login as.
In the case of the sequence of group permissions, l may
occupy the third position. l refers to mandatory file and
record locking. This permission describes a file's ability
to allow other files to lock its reading or writing permis-
sions during access.
For others permissions, the third position may be occupied
by t or T. These refer to the state of the sticky bit and
execution permissions.
INTERNATIONAL FUNCTIONALITY
ls can process directory and file names containing charac-
ters from supplementary code sets. Multi-column output can
be displayed correctly using the -C and -x options.
With the -b and -q options, ls considers all characters from
supplementary code sets to be printable.
EXAMPLES
An example of a file's permissions is:
-rwxr--r--
This describes a file that is readable, writable, and exe-
cutable by the user and readable by the group and others.
Another example of a file's permissions is:
-rwsr-xr-x
Page 4 Printed 11/19/92
LS(1) RISC/os Reference Manual LS(1)
This describes a file that is readable, writable, and exe-
cutable by the user, readable and executable by the group
and others, and allows its user-ID to be assumed, during
execution, by the user presently executing it.
Another example of a file's permissions is:
-rw-rwl---
This describes a file that is readable and writable only by
the user and the group and can be locked during access.
An example of a command line:
ls -a
This command prints the names of all files in the current
directory, including those that begin with a dot (.), which
normally do not print.
Another example of a command line:
ls -aisn
This command provides information on all files, including
those that begin with a dot (a), the i-number-the memory
address of the i-node associated with the file-printed in
the left-hand column (i); the size (in blocks) of the files,
printed in the column to the right of the i-numbers (s);
finally, the report is displayed in the numeric version of
the long list, printing the UID (instead of user name) and
GID (instead of group name) numbers associated with the
files.
When the sizes of the files in a directory are listed, a
total count of blocks, including indirect blocks, is
printed.
FILES
/etc/passwd user IDs for ls -l and ls
-o
/etc/group group IDs for ls -l and
ls -g
/usr/share/lib/terminfo/?/* terminal information
database
SEE ALSO
chmod(1), find(1).
NOTES
In a Remote File Sharing environment, you may not have the
permissions that the output of the ls -l command leads you
Printed 11/19/92 Page 5
LS(1) RISC/os Reference Manual LS(1)
to believe. For more information see the System
Administrator's Guide.
Unprintable characters in file names may confuse the colum-
nar output options.
The total block count will be incorrect if if there are hard
links among the files.
Page 6 Printed 11/19/92