LOAD(1prom)         UMIPS-V Reference Manual          LOAD(1prom)



     NAME
          load - download image via serial line

     SYNOPSIS
          load console_device

     DESCRIPTION
          load allows you to load memory over a serial line connection
          from a system running the RISC/os program tip(1).  To
          download an image, use the tip command to establish
          communication with either the local or remote console port
          of the machine to be downloaded.  For additional
          information, refer to the tip command.

          If you transfer data to the remote port, be sure that the
          remote port is enabled.  Refer to the enable command for
          additional information.  After trying several PROM Monitor
          commands to verify that tip(1) is communicating successfully
          with the remote port, enter the load command, specifying
          either tty(0) or tty(1) to reflect the serial port with
          which tip is communicating.  After the load command, the
          PROM expects you to download an image.  If you want to abort
          this mode, type a Control-c.  To download the image, refer
          to the tip command in the User's Reference Manual.  The PROM
          Monitor returns to command mode after the download
          completes.  Use the PROM Monitor go command to run the
          downloaded program.

     SEE ALSO
          enable(1prom), go(1prom), sload(1prom).
          sdownload(1spp), intro(1spp), slp(5spp), tip(1spp) in the
          System Programmer's Package.























     Page 1                                          (printed 3/13/90)