ROUTE(1M-SysV)      RISC/os Reference Manual       ROUTE(1M-SysV)



NAME
     route - manually manipulate the routing tables

SYNOPSIS
     /usr/etc/route [ -f ] [ -n ] [ command args ]

DESCRIPTION
     route is a program used to manually manipulate the network
     routing tables.  It normally is not needed, as the system
     routing table management daemon, routed(1M), should tend to
     this task.

     route accepts two commands:  add, to add a route, and
     delete, to delete a route.

     All commands have the following syntax:

       /usr/etc/route command [ net | host ] destination gateway
     [ metric ]

     where destination is the destination host or network, gate-
     way is the next-hop gateway to which packets should be
     addressed, and metric is a count indicating the number of
     hops to the destination.  The metric is required for add
     commands; it must be zero if the destination is on a
     directly-attached network, and nonzero if the route utilizes
     one or more gateways.  If adding a route with metric 0, the
     gateway given is the address of this host on the common net-
     work, indicating the interface to be used for transmission.
     Routes to a particular host are distinguished from those to
     a network by interpreting the Internet address associated
     with destination.  The optional keywords net and host force
     the destination to be interpreted as a network or a host,
     respectively.  Otherwise, if the destination has a ``local
     address part'' of INADDR_ANY, or if the destination is the
     symbolic name of a network, then the route is assumed to be
     to a network; otherwise, it is presumed to be a route to a
     host.  If the route is to a destination connected via a
     gateway, the metric should be greater than 0.  All symbolic
     names specified for a destination or gateway are looked up
     first as a host name using gethostbyname(3N).  If this
     lookup fails, getnetbyname (see getnetent(3N)) is then used
     to interpret the name as that of a network.

     route uses a raw socket and the SIOCADDRT and SIOCDELRT
     ioctl's to do its work.  As such, only the super-user may
     modify the routing tables.

     If the -f option is specified, route will ``flush'' the
     routing tables of all gateway entries.  If this is used in
     conjunction with one of the commands described above, the
     tables are flushed prior to the command's application.



                         Printed 1/15/91                   Page 1

ROUTE(1M-SysV)      RISC/os Reference Manual       ROUTE(1M-SysV)



     The -n option prevents attempts to print host and network
     names symbolically when reporting actions.

DIAGNOSTICS
     ``add [ host | network ] %s: gateway %s flags %x''
     The specified route is being added to the tables.  The
     values printed are from the routing table entry supplied in
     the ioctl call.  If the gateway address used was not the
     primary address of the gateway (the first one returned by
     gethostbyname), the gateway address is printed numerically
     as well as symbolically.

     ``delete [ host | network ] %s: gateway %s flags %x''
     As above, but when deleting an entry.

     ``%s %s done''
     When the -f flag is specified, each routing table entry
     deleted is indicated with a message of this form.

     ``Network is unreachable''
     An attempt to add a route failed because the gateway listed
     was not on a directly-connected network.  The next-hop gate-
     way must be given.

     ``not in table''
     A delete operation was attempted for an entry which wasn't
     present in the tables.

     ``routing table overflow''
     An add operation was attempted, but the system was low on
     resources and was unable to allocate memory to create the
     new entry.

SEE ALSO
     routed(1M), intro(7N).

ORIGIN
     4.3 BSD

















 Page 2                  Printed 1/15/91