LPR(1-BSD)          RISC/os Reference Manual           LPR(1-BSD)



NAME
     lpr - off line print

SYNOPSIS
     lpr [ -Pprinter ] [ -#num ] [ -C class ] [ -J job ] [ -T
     title ] [ -i [ numcols ]] [ -1234 font ] [ -wnum ] [
     -pltndgvcfrmhs ] [ name ...  ]

DESCRIPTION
     lpr uses a spooling daemon to print the named files when
     facilities become available.  If no names appear, the stan-
     dard input is assumed.  The -P option may be used to force
     output to a specific printer.  Normally, the default printer
     is used (site dependent), or the value of the environment
     variable PRINTER is used.

     The following single letter options are used to notify the
     line printer spooler that the files are not standard text
     files. The spooling daemon will use the appropriate filters
     to print the data accordingly.

     -p   Use pr(1) to format the files (equivalent to print).

     -l   Use a filter which allows control characters to be
          printed and suppresses page breaks.

     -t   The files are assumed to contain data from troff(1)
          (cat phototypesetter commands).

     -n   The files are assumed to contain data from ditroff
          (device independent troff).

     -d   The files are assumed to contain data from tex(l) (DVI
          format from Stanford).

     -g   The files are assumed to contain standard plot data as
          produced by the plot(3X) routines (see also plot(1G)
          for the filters used by the printer spooler).

     -v   The files are assumed to contain a raster image for
          devices like the Benson Varian.

     -c   The files are assumed to contain data produced by
          cifplot(l).

     -f   Use a filter which interprets the first character of
          each line as a standard FORTRAN carriage control char-
          acter.

     The remaining single letter options have the following mean-
     ing.




                         Printed 1/15/91                   Page 1

LPR(1-BSD)          RISC/os Reference Manual           LPR(1-BSD)



     -r   Remove the file upon completion of spooling or upon
          completion of printing (with the -s option).

     -m   Send mail upon completion.

     -h   Suppress the printing of the burst page.

     -s   Use symbolic links.  Usually files are copied to the
          spool directory.

     The -C option takes the following argument as a job classif-
     ication for use on the burst page.  For example,

          lpr -C EECS foo.c

     causes the system name (the name returned by hostname(1)) to
     be replaced on the burst page by EECS, and the file foo.c to
     be printed.

     The -J option takes the following argument as the job name
     to print on the burst page.  Normally, the first file's name
     is used.

     The -T option uses the next argument as the title used by
     pr(1) instead of the file name.

     To get multiple copies of output, use the -#num option,
     where num is the number of copies desired of each file
     named.  For example,

          lpr -#3 foo.c bar.c more.c

     would result in 3 copies of the file foo.c, followed by 3
     copies of the file bar.c, etc.  On the other hand,

          cat foo.c bar.c more.c | lpr -#3

     will give three copies of the concatenation of the files.

     The -i option causes the output to be indented. If the next
     argument is numeric, it is used as the number of blanks to
     be printed before each line; otherwise, 8 characters are
     printed.

     The -w option takes the immediately following number to be
     the page width for pr.

     The -s option will use symlink(2) to link data files rather
     than trying to copy them so large files can be printed.
     This means the files should not be modified or removed until
     they have been printed.




 Page 2                  Printed 1/15/91

LPR(1-BSD)          RISC/os Reference Manual           LPR(1-BSD)



     The option -1234 Specifies a font to be mounted on font
     position i.  The daemon will construct a .railmag file
     referencing /usr/lib/vfont/name.size.

FILES
     /etc/passwd            personal identification
     /etc/printcap          printer capabilities data base
     /usr/lib/lpd*          line printer daemons
     /usr/spool/*           directories used for spooling
     /usr/spool/*/cf*       daemon control files
     /usr/spool/*/df*       data files specified in "cf" files
     /usr/spool/*/tf*       temporary copies of "cf" files

SEE ALSO
     lpq(1), lprm(1), pr(1), symlink(2), printcap(5), lpc(8),
     lpd(8)

DIAGNOSTICS
     If you try to spool too large a file, it will be truncated.
     lpr will object to printing binary files.  If a user other
     than root prints a file and spooling is disabled, lpr will
     print a message saying so and will not put jobs in the
     queue.  If a connection to lpd on the local machine cannot
     be made, lpr will say that the daemon cannot be started.
     Diagnostics may be printed in the daemon's log file regard-
     ing missing spool files by lpd.

BUGS
     Fonts for troff and tex reside on the host with the printer.
     It is currently not possible to use local font libraries.

























                         Printed 1/15/91                   Page 3