ED(1-SysV) RISC/os Reference Manual ED(1-SysV)
NAME
ed, red - text editor
SYNOPSIS
ed [-s] [-p string ] [-x] [file]
red [-s] [-p string ] [-x] [file]
DESCRIPTION
ed is the standard text editor. If the file argument is
given, ed simulates an e command (see below) on the named
file; that is to say, the file is read into ed's buffer so
that it can be edited.
-s Suppresses the printing of character counts by e, r,
and w commands, of diagnostics from e and q commands,
and of the ! prompt after a !shell command. Also, see
the WARNING section at the end of this manual page.
-p Allows the user to specify a prompt string.
-x Encryption option; when this option is used, the file
will be encrypted as it is being written and will
require an encryption key to be read (see crypt(1)).
Also, see the WARNING section at the end of this manual
page.
ed operates on a copy of the file it is editing; changes
made to the copy have no effect on the file until a w
(write) command is given. The copy of the text being edited
resides in a temporary file called the buffer. There is
only one buffer.
red is a restricted version of ed. It will only allow edit-
ing of files in the current directory. It prohibits execut-
ing shell commands via !shell command. Attempts to bypass
these restrictions result in an error message (restricted
shell).
Both ed and red support the fspec(4) formatting capability.
After including a format specification as the first line of
file and invoking ed with your terminal in stty -tabs or
stty tab3 mode (see stty(1)), the specified tab stops will
automatically be used when scanning file. For example, if
the first line of a file contained:
<:t5,10,15 s72:>
tab stops would be set at columns 5, 10, and 15, and a max-
imum line length of 72 would be imposed. NOTE: while input-
ing text, tab characters when typed are expanded to every
eighth column as is the default.
Printed 1/15/91 Page 1
ED(1-SysV) RISC/os Reference Manual ED(1-SysV)
Commands to ed have a simple and regular structure: zero,
one, or two addresses followed by a single-character com-
mand, possibly followed by parameters to that command.
These addresses specify one or more lines in the buffer.
Every command that requires addresses has default addresses,
so that the addresses can very often be omitted.
In general, only one command may appear on a line. Certain
commands allow the input of text. This text is placed in
the appropriate place in the buffer. While ed is accepting
text, it is said to be in input mode. In this mode, no com-
mands are recognized; all input is merely collected. Input
mode is left by typing a period (.) alone at the beginning
of a line, followed immediately by a carriage return.
ed supports a limited form of regular expression notation;
regular expressions are used in addresses to specify lines
and in some commands (e.g., s) to specify portions of a line
that are to be substituted. A regular expression (RE)
specifies a set of character strings. A member of this set
of strings is said to be matched by the RE. The REs allowed
by ed are constructed as follows:
The following one-character REs match a single character:
1.1 An ordinary character (not one of those discussed in
1.2 below) is a one-character RE that matches itself.
1.2 A backslash (\) followed by any special character is
a one-character RE that matches the special character
itself. The special characters are:
a. ., *, [, and \ (period, asterisk, left square
bracket, and backslash, respectively), which
are always special, except when they appear
within square brackets ([]; see 1.4 below).
b. ^ (caret or circumflex), which is special at
the beginning of an entire RE (see 3.1 and 3.2
below), or when it immediately follows the left
of a pair of square brackets ([]) (see 1.4
below).
c. $ (dollar sign), which is special at the end of
an entire RE (see 3.2 below).
d. The character used to bound (i.e., delimit) an
entire RE, which is special for that RE (for
example, see how slash (/) is used in the g
command, below.)
1.3 A period (.) is a one-character RE that matches any
Page 2 Printed 1/15/91
ED(1-SysV) RISC/os Reference Manual ED(1-SysV)
character except new-line.
1.4 A non-empty string of characters enclosed in square
brackets ([]) is a one-character RE that matches any
one character in that string. If, however, the first
character of the string is a circumflex (^), the
one-character RE matches any character except new-
line and the remaining characters in the string. The
^ has this special meaning only if it occurs first in
the string. The minus (-) may be used to indicate a
range of consecutive ASCII characters; for example,
[0-9] is equivalent to [0123456789]. The - loses
this special meaning if it occurs first (after an
initial ^, if any) or last in the string. The right
square bracket (]) does not terminate such a string
when it is the first character within it (after an
initial ^, if any); e.g., []a-f] matches either a
right square bracket (]) or one of the letters a
through f inclusive. The four characters listed in
1.2.a above stand for themselves within such a string
of characters.
The following rules may be used to construct REs from one-
character REs:
2.1 A one-character RE is a RE that matches whatever the
one-character RE matches.
2.2 A one-character RE followed by an asterisk (*) is a
RE that matches zero or more occurrences of the one-
character RE. If there is any choice, the longest
leftmost string that permits a match is chosen.
2.3 A one-character RE followed by \{m\}, \{m,\}, or
\{m,n\} is a RE that matches a range of occurrences
of the one-character RE. The values of m and n must
be non-negative integers less than 256; \{m\} matches
exactly m occurrences; \{m,\} matches at least m
occurrences; \{m,n\} matches any number of
occurrences between m and n inclusive. Whenever a
choice exists, the RE matches as many occurrences as
possible.
2.4 The concatenation of REs is a RE that matches the
concatenation of the strings matched by each com-
ponent of the RE.
2.5 A RE enclosed between the character sequences \( and
\) is a RE that matches whatever the unadorned RE
matches.
2.6 The expression \n matches the same string of
Printed 1/15/91 Page 3
ED(1-SysV) RISC/os Reference Manual ED(1-SysV)
characters as was matched by an expression enclosed
between \( and \) earlier in the same RE. Here n is
a digit; the sub-expression specified is that begin-
ning with the n-th occurrence of \( counting from the
left. For example, the expression ^\(.*\)\1$ matches
a line consisting of two repeated appearances of the
same string.
Finally, an entire RE may be constrained to match only an
initial segment or final segment of a line (or both).
3.1 A circumflex (^) at the beginning of an entire RE
constrains that RE to match an initial segment of a
line.
3.2 A dollar sign ($) at the end of an entire RE con-
strains that RE to match a final segment of a line.
The construction ^entire RE$ constrains the entire RE to
match the entire line.
The null RE (e.g., //) is equivalent to the last RE encoun-
tered. See also the last paragraph before FILES below.
To understand addressing in ed it is necessary to know that
at any time there is a current line. Generally speaking,
the current line is the last line affected by a command; the
exact effect on the current line is discussed under the
description of each command. Addresses are constructed as
follows:
1. The character . addresses the current line.
2. The character $ addresses the last line of the
buffer.
3. A decimal number n addresses the n-th line of the
buffer.
4. 'x addresses the line marked with the mark name char-
acter x, which must be a lower-case letter. Lines
are marked with the k command described below.
5. A RE enclosed by slashes (/) addresses the first line
found by searching forward from the line following
the current line toward the end of the buffer and
stopping at the first line containing a string match-
ing the RE. If necessary, the search wraps around to
the beginning of the buffer and continues up to and
including the current line, so that the entire buffer
is searched. See also the last paragraph before
FILES below.
Page 4 Printed 1/15/91
ED(1-SysV) RISC/os Reference Manual ED(1-SysV)
6. A RE enclosed in question marks (?) addresses the
first line found by searching backward from the line
preceding the current line toward the beginning of
the buffer and stopping at the first line containing
a string matching the RE. If necessary, the search
wraps around to the end of the buffer and continues
up to and including the current line. See also the
last paragraph before FILES below.
7. An address followed by a plus sign (+) or a minus
sign (-) followed by a decimal number specifies that
address plus (respectively minus) the indicated
number of lines. The plus sign may be omitted.
8. If an address begins with + or -, the addition or
subtraction is taken with respect to the current
line; e.g, -5 is understood to mean .-5.
9. If an address ends with + or -, then 1 is added to or
subtracted from the address, respectively. As a
consequence of this rule and of Rule 8, immediately
above, the address - refers to the line preceding the
current line. (To maintain compatibility with ear-
lier versions of the editor, the character ^ in
addresses is entirely equivalent to -.) Moreover,
trailing + and - characters have a cumulative effect,
so -- refers to the current line less 2.
10. For convenience, a comma (,) stands for the address
pair 1,$, while a semicolon (;) stands for the pair
.,$.
Commands may require zero, one, or two addresses. Commands
that require no addresses regard the presence of an address
as an error. Commands that accept one or two addresses
assume default addresses when an insufficient number of
addresses is given; if more addresses are given than such a
command requires, the last one(s) are used.
Typically, addresses are separated from each other by a
comma (,). They may also be separated by a semicolon (;).
In the latter case, the current line (.) is set to the first
address, and only then is the second address calculated.
This feature can be used to determine the starting line for
forward and backward searches (see Rules 5 and 6, above).
The second address of any two-address sequence must
correspond to a line that follows, in the buffer, the line
corresponding to the first address.
In the following list of ed commands, the default addresses
are shown in parentheses. The parentheses are not part of
the address; they show that the given addresses are the
Printed 1/15/91 Page 5
ED(1-SysV) RISC/os Reference Manual ED(1-SysV)
default.
It is generally illegal for more than one command to appear
on a line. However, any command (except e, f, r, or w) may
be suffixed by l, n, or p in which case the current line is
either listed, numbered or printed, respectively, as dis-
cussed below under the l, n, and p commands.
(.)a
<text>
.
The append command reads the given text and appends it
after the addressed line; . is left at the last
inserted line, or, if there were none, at the addressed
line. Address 0 is legal for this command: it causes
the ``appended'' text to be placed at the beginning of
the buffer. The maximum number of characters that may
be entered from a terminal is 256 per line (including
the new-line character).
(.)c
<text>
.
The change command deletes the addressed lines, then
accepts input text that replaces these lines; . is left
at the last line input, or, if there were none, at the
first line that was not deleted.
(.,.)d
The delete command deletes the addressed lines from the
buffer. The line after the last line deleted becomes
the current line; if the lines deleted were originally
at the end of the buffer, the new last line becomes the
current line.
e file
The edit command causes the entire contents of the
buffer to be deleted, and then the named file to be
read in; . is set to the last line of the buffer. If
no file name is given, the currently-remembered file
name, if any, is used (see the f command). The number
of characters read is typed; file is remembered for
possible use as a default file name in subsequent e, r,
and w commands. If file is replaced by !, the rest of
the line is taken to be a shell (sh(1)) command whose
output is to be read. Such a shell command is not
remembered as the current file name. See also DIAGNOS-
TICS below.
E file
The Edit command is like e, except that the editor does
not check to see if any changes have been made to the
Page 6 Printed 1/15/91
ED(1-SysV) RISC/os Reference Manual ED(1-SysV)
buffer since the last w command.
f file
If file is given, the file-name command changes the
currently-remembered file name to file; otherwise, it
prints the currently-remembered file name.
(1,$)g/RE/command list
In the global command, the first step is to mark every
line that matches the given RE. Then, for every such
line, the given command list is executed with . ini-
tially set to that line. A single command or the first
of a list of commands appears on the same line as the
global command. All lines of a multi-line list except
the last line must be ended with a \; a, i, and c com-
mands and associated input are permitted. The . ter-
minating input mode may be omitted if it would be the
last line of the command list. An empty command list
is equivalent to the p command. The g, G, v, and V
commands are not permitted in the command list. See
also ERRORS and the last paragraph before FILES below.
(1,$)G/RE/
In the interactive Global command, the first step is to
mark every line that matches the given RE. Then, for
every such line, that line is printed, . is changed to
that line, and any one command (other than one of the
a, c, i, g, G, v, and V commands) may be input and is
executed. After the execution of that command, the
next marked line is printed, and so on; a new-line acts
as a null command; an & causes the re-execution of the
most recent command executed within the current invoca-
tion of G. Note that the commands input as part of the
execution of the G command may address and affect any
lines in the buffer. The G command can be terminated
by an interrupt signal (ASCII DEL or BREAK).
h
The help command gives a short error message that
explains the reason for the most recent ? diagnostic.
H
The Help command causes ed to enter a mode in which
error messages are printed for all subsequent ? diag-
nostics. It will also explain the previous ? if there
was one. The H command alternately turns this mode on
and off; it is initially off.
(.)i
<text>
.
The insert command inserts the given text before the
Printed 1/15/91 Page 7
ED(1-SysV) RISC/os Reference Manual ED(1-SysV)
addressed line; . is left at the last inserted line,
or, if there were none, at the addressed line. This
command differs from the a command only in the place-
ment of the input text. Address 0 is not legal for
this command. The maximum number of characters that
may be entered from a terminal is 256 per line (includ-
ing the new-line character).
(.,.+1)j
The join command joins contiguous lines by removing the
appropriate new-line characters. If exactly one
address is given, this command does nothing.
(.)kx
The mark command marks the addressed line with name x,
which must be a lower-case letter. The address 'x then
addresses this line; . is unchanged.
(.,.)l
The list command prints the addressed lines in an unam-
biguous way: a few non-printing characters (e.g., tab,
backspace) are represented by visually mnemonic over-
strikes. All other non-printing characters are printed
in octal, and long lines are folded. An l command may
be appended to any other command other than e, f, r, or
w.
(.,.)ma
The move command repositions the addressed line(s)
after the line addressed by a. Address 0 is legal for
a and causes the addressed line(s) to be moved to the
beginning of the file. It is an error if address a
falls within the range of moved lines; . is left at the
last line moved.
(.,.)n
The number command prints the addressed lines, preced-
ing each line by its line number and a tab character; .
is left at the last line printed. The n command may be
appended to any other command other than e, f, r, or w.
(.,.)p
The print command prints the addressed lines; . is left
at the last line printed. The p command may be
appended to any other command other than e, f, r, or w.
For example, dp deletes the current line and prints the
new current line.
P
The editor will prompt with a * for all subsequent com-
mands. The P command alternately turns this mode on
and off; it is initially off.
Page 8 Printed 1/15/91
ED(1-SysV) RISC/os Reference Manual ED(1-SysV)
q
The quit command causes ed to exit. No automatic write
of a file is done; however, see DIAGNOSTICS, below.
Q
The editor exits without checking if changes have been
made in the buffer since the last w command.
($)r file
The read command reads in the given file after the
addressed line. If no file name is given, the
currently-remembered file name, if any, is used (see e
and f commands). The currently-remembered file name is
not changed unless file is the very first file name
mentioned since ed was invoked. Address 0 is legal for
r and causes the file to be read at the beginning of
the buffer. If the read is successful, the number of
characters read is typed; . is set to the last line
read in. If file is replaced by !, the rest of the
line is taken to be a shell (sh(1)) command whose out-
put is to be read. For example, "$r !ls" appends
current directory to the end of the file being edited.
Such a shell command is not remembered as the current
file name.
(.,.)s/RE/replacement/ or
(.,.)s/RE/replacement/g or
(.,.)s/RE/replacement/n n = 1-512
The substitute command searches each addressed line for
an occurrence of the specified RE. In each line in
which a match is found, all (non-overlapped) matched
strings are replaced by the replacement if the global
replacement indicator g appears after the command. If
the global indicator does not appear, only the first
occurrence of the matched string is replaced. If a
number n appears after the command, only the n th
occurrence of the matched string on each addressed line
is replaced. It is an error for the substitution to
fail on all addressed lines. Any character other than
space or new-line may be used instead of / to delimit
the RE and the replacement; . is left at the last line
on which a substitution occurred. See also the last
paragraph before FILES below.
An ampersand (&) appearing in the replacement is
replaced by the string matching the RE on the current
line. The special meaning of & in this context may be
suppressed by preceding it by \. As a more general
feature, the characters \n, where n is a digit, are
replaced by the text matched by the n-th regular subex-
pression of the specified RE enclosed between \( and
\). When nested parenthesized subexpressions are
Printed 1/15/91 Page 9
ED(1-SysV) RISC/os Reference Manual ED(1-SysV)
present, n is determined by counting occurrences of \(
starting from the left. When the character % is the
only character in the replacement, the replacement used
in the most recent substitute command is used as the
replacement in the current substitute command. The %
loses its special meaning when it is in a replacement
string of more than one character or is preceded by a
\.
A line may be split by substituting a new-line charac-
ter into it. The new-line in the replacement must be
escaped by preceding it by \. Such substitution cannot
be done as part of a g or v command list.
(.,.)ta
This command acts just like the m command, except that
a copy of the addressed lines is placed after address a
(which may be 0); . is left at the last line of the
copy.
u
The undo command nullifies the effect of the most
recent command that modified anything in the buffer,
namely the most recent a, c, d, g, i, j, m, r, s, t, v,
G, or V command.
(1,$)v/RE/command list
This command is the same as the global command g except
that the command list is executed with . initially set
to every line that does not match the RE.
(1,$)V/RE/
This command is the same as the interactive global com-
mand G except that the lines that are marked during the
first step are those that do not match the RE.
(1,$)w file
The write command writes the addressed lines into the
named file. If the file does not exist, it is created
with mode 666 (readable and writable by everyone),
unless your umask setting (see umask(1)) dictates oth-
erwise. The currently-remembered file name is not
changed unless file is the very first file name men-
tioned since ed was invoked. If no file name is given,
the currently-remembered file name, if any, is used
(see e and f commands); . is unchanged. If the command
is successful, the number of characters written is
typed. If file is replaced by !, the rest of the line
is taken to be a shell (sh(1)) command whose standard
input is the addressed lines. Such a shell command is
not remembered as the current file name.
Page 10 Printed 1/15/91
ED(1-SysV) RISC/os Reference Manual ED(1-SysV)
X
An encryption key is requested from the standard input.
Subsequent e, r, and w commands will use this key to
encrypt or decrypt the text (see crypt(1)). An expli-
citly empty key turns off encryption. Also, see the -x
option of ed.
($)=
The line number of the addressed line is typed; . is
unchanged by this command.
!shell command
The remainder of the line after the ! is sent to the
UNIX system shell (sh(1)) to be interpreted as a com-
mand. Within the text of that command, the unescaped
character % is replaced with the remembered file name;
if a ! appears as the first character of the shell com-
mand, it is replaced with the text of the previous
shell command. Thus, !! will repeat the last shell
command. If any expansion is performed, the expanded
line is echoed; . is unchanged.
(.+1)<new-line>
An address alone on a line causes the addressed line to
be printed. A new-line alone is equivalent to .+1p; it
is useful for stepping forward through the buffer.
If an interrupt signal (ASCII DEL or BREAK) is sent, ed
prints a ? and returns to its command level.
Some size limitations: 512 characters per line, 256 charac-
ters per global command list, and 64 characters per file
name. The limit on the number of lines depends on the
amount of user memory: each line takes 1 word.
When reading a file, ed discards ASCII NUL characters.
Files (e.g., a.out) that contain characters not in the ASCII
set (bit 8 on) cannot be edited by ed.
If a file is not terminated by a new-line character, ed adds
one and outputs a message explaining what it did.
If the closing delimiter of a RE or of a replacement string
(e.g., /) would be the last character before a new-line,
that delimiter may be omitted, in which case the addressed
line is printed. The following pairs of commands are
equivalent:
s/s1/s2 s/s1/s2/p
g/s1 g/s1/p
?s1 ?s1?
FILES
/usr/tmp default directory for temporary work file.
Printed 1/15/91 Page 11
ED(1-SysV) RISC/os Reference Manual ED(1-SysV)
$TMPDIR if this environmental variable is not null, its
value is used in place of /usr/tmp as the direc-
tory name for the temporary work file.
ed.hup work is saved here if the terminal is hung up.
DIAGNOSTICS
? for command errors.
?file for an inaccessible file.
(use the help and Help commands for detailed
explanations).
If changes have been made in the buffer since the last w
command that wrote the entire buffer, ed warns the user if
an attempt is made to destroy ed's buffer via the e or q
commands. It prints ? and allows one to continue editing.
A second e or q command at this point will take effect. The
-s command-line option inhibits this feature.
SEE ALSO
edit(1), ex(1), grep(1), sed(1), sh(1), stty(1), umask(1),
vi(1).
fspec(4), regexp(5) in the Programmer's Reference Manual.
ERRORS
A ! command cannot be subject to a g or a v command.
The ! command and the ! escape from the e, r, and w commands
cannot be used if the editor is invoked from a restricted
shell (see sh(1)).
The sequence \n in a RE does not match a new-line character.
Characters are masked to 7 bits on input.
If the editor input is coming from a command file (e.g., ed
file < ed-cmd-file), the editor will exit at the first
failure.
WARNINGS
The -x option is provided with the Security Administration
Utilities, which is available only in the United States.
The - option, although supported in this release for upward
compatibility, may not be supported in future versions of
ed. Convert shell scripts that use the - option to use the
-s option, instead.
Page 12 Printed 1/15/91