DBOPEN(3) 1993 DBOPEN(3)
NAME
dbopen - database access methods
SYNOPSIS
#include <sys/types.h>
#include <limits.h>
#include <db.h>
DB *
dbopen(const char *file, int flags, int mode, DBTYPE type,
const void *openinfo);
DESCRIPTION
Dbopen is the library interface to database files. The
supported file formats are btree, hashed and UNIX file
oriented. The btree format is a representation of a
sorted, balanced tree structure. The hashed format is an
extensible, dynamic hashing scheme. The flat-file format
is a byte stream file with fixed or variable length
records. The formats and file format specific information
are described in detail in their respective manual pages
btree(3), hash(3) and recno(3).
Dbopen opens file for reading and/or writing. Files never
intended to be preserved on disk may be created by setting
the file parameter to NULL.
The flags and mode arguments are as specified to the
open(2) routine, however, only the O_CREAT, O_EXCL,
O_EXLOCK, O_RDONLY, O_RDWR, O_SHLOCK and O_TRUNC flags are
meaningful. (Note, opening a database file O_WRONLY is
not possible.)
The type argument is of type DBTYPE (as defined in the
<db.h> include file) and may be set to DB_BTREE, DB_HASH
or DB_RECNO.
The openinfo argument is a pointer to an access method
specific structure described in the access method's manual
page. If openinfo is NULL, each access method will use
defaults appropriate for the system and the access method.
Dbopen returns a pointer to a DB structure on success and
NULL on error. The DB structure is defined in the <db.h>
include file, and contains at least the following fields:
typedef struct {
DBTYPE type;
int (*close)(const DB *db);
int (*del)(const DB *db, const DBT *key, u_int flags);
int (*fd)(const DB *db);
int (*get)(const DB *db, DBT *key, DBT *data, u_int flags);
int (*put)(const DB *db, DBT *key, const DBT *data,
u_int flags);
24, May 1
DBOPEN(3) 1993 DBOPEN(3)
int (*sync)(const DB *db, u_int flags);
int (*seq)(const DB *db, DBT *key, DBT *data, u_int flags);
} DB;
These elements describe a database type and a set of
functions performing various actions. These functions
take a pointer to a structure as returned by dbopen, and
sometimes one or more pointers to key/data structures and
a flag value.
type The type of the underlying access method (and file
format).
close A pointer to a routine to flush any cached
information to disk, free any allocated resources,
and close the underlying file(s). Since key/data
pairs may be cached in memory, failing to sync the
file with a close or sync function may result in
inconsistent or lost information. Close routines
return -1 on error (setting errno) and 0 on
success.
del A pointer to a routine to remove key/data pairs
from the database.
The parameter flag may be set to the following
value:
R_CURSOR
Delete the record referenced by the cursor.
The cursor must have previously been
initialized.
Delete routines return -1 on error (setting errno),
0 on success, and 1 if the specified key was not in
the file.
fd A pointer to a routine which returns a file
descriptor representative of the underlying
database. A file descriptor referencing the same
file will be returned to all processes which call
dbopen with the same file name. This file
descriptor may be safely used as a argument to the
fcntl(2) and flock(2) locking functions. The file
descriptor is not necessarily associated with any
of the underlying files used by the access method.
No file descriptor is available for in memory
databases. Fd routines return -1 on error (setting
errno), and the file descriptor on success.
get A pointer to a routine which is the interface for
keyed retrieval from the database. The address and
length of the data associated with the specified
key are returned in the structure referenced by
24, May 2
DBOPEN(3) 1993 DBOPEN(3)
data. Get routines return -1 on error (setting
errno), 0 on success, and 1 if the key was not in
the file.
put A pointer to a routine to store key/data pairs in
the database.
The parameter flag may be set to one of the
following values:
R_CURSOR
Replace the key/data pair referenced by the
cursor. The cursor must have previously
been initialized.
R_IAFTER
Append the data immediately after the data
referenced by key, creating a new key/data
pair. The record number of the appended
key/data pair is returned in the key
structure. (Applicable only to the DB_RECNO
access method.)
R_IBEFORE
Insert the data immediately before the data
referenced by key, creating a new key/data
pair. The record number of the inserted
key/data pair is returned in the key
structure. (Applicable only to the DB_RECNO
access method.)
R_NOOVERWRITE
Enter the new key/data pair only if the key
does not previously exist.
R_SETCURSOR
Store the key/data pair, setting or
initializing the position of the cursor to
reference it. (Applicable only to the
DB_BTREE and DB_RECNO access methods.)
R_SETCURSOR is available only for the DB_BTREE and
DB_RECNO access methods because it implies that the
keys have an inherent order which does not change.
R_IAFTER and R_IBEFORE are available only for the
DB_RECNO access method because they each imply that
the access method is able to create new keys. This
is only true if the keys are ordered and
independent, record numbers for example.
The default behavior of the put routines is to
enter the new key/data pair, replacing any
previously existing key.
24, May 3
DBOPEN(3) 1993 DBOPEN(3)
Put routines return -1 on error (setting errno), 0
on success, and 1 if the R_NOOVERWRITE flag was set
and the key already exists in the file.
seq A pointer to a routine which is the interface for
sequential retrieval from the database. The
address and length of the key are returned in the
structure referenced by key, and the address and
length of the data are returned in the structure
referenced by data.
Sequential key/data pair retrieval may begin at any
time, and the position of the ``cursor'' is not
affected by calls to the del, get, put, or sync
routines. Modifications to the database during a
sequential scan will be reflected in the scan, i.e.
records inserted behind the cursor will not be
returned while records inserted in front of the
cursor will be returned.
The flag value must be set to one of the following
values:
R_CURSOR
The data associated with the specified key
is returned. This differs from the get
routines in that it sets or initializes the
cursor to the location of the key as well.
(Note, for the DB_BTREE access method, the
returned key is not necessarily an exact
match for the specified key. The returned
key is the smallest key greater than or
equal to the specified key, permitting
partial key matches and range searches.)
R_FIRST
The first key/data pair of the database is
returned, and the cursor is set or
initialized to reference it.
R_LAST The last key/data pair of the database is
returned, and the cursor is set or
initialized to reference it. (Applicable
only to the DB_BTREE and DB_RECNO access
methods.)
R_NEXT Retrieve the key/data pair immediately after
the cursor. If the cursor is not yet set,
this is the same as the R_FIRST flag.
R_PREV Retrieve the key/data pair immediately
before the cursor. If the cursor is not yet
set, this is the same as the R_LAST flag.
(Applicable only to the DB_BTREE and
24, May 4
DBOPEN(3) 1993 DBOPEN(3)
DB_RECNO access methods.)
R_LAST and R_PREV are available only for the
DB_BTREE and DB_RECNO access methods because they
each imply that the keys have an inherent order
which does not change.
Seq routines return -1 on error (setting errno), 0
on success and 1 if there are no key/data pairs
less than or greater than the specified or current
key. If the DB_RECNO access method is being used,
and if the database file is a character special
file and no complete key/data pairs are currently
available, the seq routines return 2.
sync A pointer to a routine to flush any cached
information to disk. If the database is in memory
only, the sync routine has no effect and will
always succeed.
The flag value may be set to the following value:
R_RECNOSYNC
If the DB_RECNO access method is being used,
this flag causes the sync routine to apply
to the btree file which underlies the recno
file, not the recno file itself. (See the
bfname field of the recno(3) manual page for
more information.)
Sync routines return -1 on error (setting errno)
and 0 on success.
KEY/DATA PAIRS
Access to all file types is based on key/data pairs. Both
keys and data are represented by the following data
structure:
typedef struct {
void *data;
size_t size;
} DBT;
The elements of the DBT structure are defined as follows:
data A pointer to a byte string.
size The length of the byte string.
Key and data byte strings may reference strings of
essentially unlimited length although any two of them must
fit into available memory at the same time. It should be
noted that the access methods provide no guarantees about
byte string alignment.
24, May 5
DBOPEN(3) 1993 DBOPEN(3)
ERRORS
The dbopen routine may fail and set errno for any of the
errors specified for the library routines open(2) and
malloc(3) or the following:
[EFTYPE]
A file is incorrectly formatted.
[EINVAL]
A parameter has been specified (hash function, pad
byte etc.) that is incompatible with the current
file specification or which is not meaningful for
the function (for example, use of the cursor
without prior initialization) or there is a
mismatch between the version number of file and the
software.
The close routines may fail and set errno for any of the
errors specified for the library routines close(2),
read(2), write(2), free(3), or fsync(2).
The del, get, put and seq routines may fail and set errno
for any of the errors specified for the library routines
read(2), write(2), free(3) or malloc(3).
The fd routines will fail and set errno to ENOENT for in
memory databases.
The sync routines may fail and set errno for any of the
errors specified for the library routine fsync(2).
SEE ALSO
btree(3), hash(3), mpool(3), recno(3)
BUGS
The typedef DBT is a mnemonic for ``data base thang'', and
was used because noone could think of a reasonable name
that wasn't already used.
The file descriptor interface is a kluge and will be
deleted in a future version of the interface.
None of the access methods provide any form of concurrent
access, locking, or transactions.
24, May 6