GETPRIORITY(2)            386BSD Programmer's Manual            GETPRIORITY(2)

NAME
     getpriority, setpriority - get/set program scheduling priority

SYNOPSIS
     #include <sys/time.h>
     #include <sys/resource.h>

     int
     getpriority(int which, int who)

     int
     setpriority(int which, int who, int prio)

DESCRIPTION
     The scheduling priority of the process, process group, or user, as
     indicated by which and who is obtained with the getpriority() call and
     set with the setpriority() call.  Which is one of PRIO_PROCESS,
     PRIO_PGRP, or PRIO_USER, and who is interpreted relative to which (a
     process identifier for PRIO_PROCESS, process group identifier for
     PRIO_PGRP, and a user ID for PRIO_USER). A zero value of who denotes the
     current process, process group, or user.  Prio is a value in the range
     -20 to 20.  The default priority is 0; lower priorities cause more
     favorable scheduling.

     The getpriority() call returns the highest priority (lowest numerical
     value) enjoyed by any of the specified processes.  The setpriority() call
     sets the priorities of all of the specified processes to the specified
     value.  Only the super-user may lower priorities.

RETURN VALUES
     Since getpriority() can legitimately return the value -1, it is necessary
     to clear the external variable errno prior to the call, then check it
     afterward to determine if a -1 is an error or a legitimate value.  The
     setpriority() call returns 0 if there is no error, or -1 if there is.

ERRORS
     Getpriority() and setpriority() will fail if:

     [ESRCH]       No process was located using the which and who values
                   specified.

     [EINVAL]      Which was not one of PRIO_PROCESS, PRIO_PGRP, or PRIO_USER.

     In addition to the errors indicated above, setpriority() will fail if:

     [EPERM]       A process was located, but neither its effective nor real
                   user ID matched the effective user ID of the caller.

     [EACCES]      A non super-user attempted to lower a process priority.

SEE ALSO
     nice(1),  fork(2),  renice(8)

HISTORY
     The getpriority function call appeared in 4.2BSD.

4th Berkeley Distribution       March 10, 1991                               1