MORE(1) 1991 MORE(1)
NAME
more, page - file perusal filter for crt viewing
SYNOPSIS
more [ -cdflsu ] [ -n ] [ +linenumber ] [ +/pattern ] [
name ... ]
page more options
DESCRIPTION
More is a filter which allows examination of a continuous
text one screenful at a time on a soft-copy terminal. It
normally pauses after each screenful, printing --More-- at
the bottom of the screen. If the user then types a
carriage return, one more line is displayed. If the user
hits a space, another screenful is displayed. Other
possibilities are enumerated later.
The command line options are:
-n An integer which is the size (in lines) of the
window which more will use instead of the default.
-c More will draw each page by beginning at the top of
the screen and erasing each line just before it
draws on it. This avoids scrolling the screen,
making it easier to read while more is writing.
This option will be ignored if the terminal does
not have the ability to clear to the end of a line.
-d More will prompt the user with the message "Press
space to continue, 'q' to quit." at the end of each
screenful, and will respond to subsequent illegal
user input by printing "Press 'h' for
instructions." instead of ringing the bell. This
is useful if more is being used as a filter in some
setting, such as a class, where many users may be
unsophisticated.
-f This causes more to count logical, rather than
screen lines. That is, long lines are not folded.
This option is recommended if nroff output is being
piped through ul, since the latter may generate
escape sequences. These escape sequences contain
characters which would ordinarily occupy screen
positions, but which do not print when they are
sent to the terminal as part of an escape sequence.
Thus more may think that lines are longer than they
actually are, and fold lines erroneously.
-l Do not treat ^L (form feed) specially. If this
option is not given, more will pause after any line
that contains a ^L, as if the end of a screenful
had been reached. Also, if a file begins with a
18, April 1
MORE(1) 1991 MORE(1)
form feed, the screen will be cleared before the
file is printed.
-s Squeeze multiple blank lines from the output,
producing only one blank line. Especially helpful
when viewing nroff output, this option maximizes
the useful information present on the screen.
-u Normally, more will handle underlining such as
produced by nroff in a manner appropriate to the
particular terminal: if the terminal can perform
underlining or has a stand-out mode, more will
output appropriate escape sequences to enable
underlining or stand-out mode for underlined
information in the source file. The -u option
suppresses this processing.
+linenumber
Start up at linenumber.
+/pattern
Start up two lines before the line containing the
regular expression pattern.
If the program is invoked as page, then the screen is
cleared before each screenful is printed (but only if a
full screenful is being printed), and k - 1 rather than k
- 2 lines are printed in each screenful, where k is the
number of lines the terminal can display.
More looks in the file /etc/termcap to determine terminal
characteristics, and to determine the default window size.
On a terminal capable of displaying 24 lines, the default
window size is 22 lines.
More looks in the environment variable MORE to pre-set any
flags desired. For example, if you prefer to view files
using the -c mode of operation, the csh command setenv
MORE -c or the sh command sequence MORE='-c' ; export MORE
would cause all invocations of more , including
invocations by programs such as man and msgs , to use this
mode. Normally, the user will place the command sequence
which sets up the MORE environment variable in the .cshrc
or .profile file.
If more is reading from a file, rather than a pipe, then a
percentage is displayed along with the --More-- prompt.
This gives the fraction of the file (in characters, not
lines) that has been read so far.
Other sequences which may be typed when more pauses, and
their effects, are as follows (i is an optional integer
argument, defaulting to 1) :
18, April 2
MORE(1) 1991 MORE(1)
i<space>
display i more lines, (or another screenful if no
argument is given)
^D display 11 more lines (a ``scroll''). If i is
given, then the scroll size is set to i.
d same as ^D (control-D)
iz same as typing a space except that i, if present,
becomes the new window size.
is skip i lines and print a screenful of lines
if skip i screenfuls and print a screenful of lines
ib skip back i screenfuls and print a screenful of
lines
i^B same as b
q or Q Exit from more.
= Display the current line number.
v Start up the editor vi at the current line.
h Help command; give a description of all the more
commands.
i/expr search for the i-th occurrence of the regular
expression expr. If there are less than i
occurrences of expr, and the input is a file
(rather than a pipe), then the position in the file
remains unchanged. Otherwise, a screenful is
displayed, starting two lines before the place
where the expression was found. The user's erase
and kill characters may be used to edit the regular
expression. Erasing back past the first column
cancels the search command.
18, April 3
MORE(1) 1991 MORE(1)
in search for the i-th occurrence of the last regular
expression entered.
' (single quote) Go to the point from which the last
search started. If no search has been performed in
the current file, this command goes back to the
beginning of the file.
!command
invoke a shell with command. The characters `%'
and `!' in "command" are replaced with the current
file name and the previous shell command
respectively. If there is no current file name,
`%' is not expanded. The sequences "\%" and "\!"
are replaced by "%" and "!" respectively.
i:n skip to the i-th next file given in the command
line (skips to last file if n doesn't make sense)
i:p skip to the i-th previous file given in the command
line. If this command is given in the middle of
printing out a file, then more goes back to the
beginning of the file. If i doesn't make sense,
more skips back to the first file. If more is not
reading from a file, the bell is rung and nothing
else happens.
:f display the current file name and line number.
:q or :Q
exit from more (same as q or Q).
. (dot) repeat the previous command.
The commands take effect immediately, i.e., it is not
necessary to type a carriage return. Up to the time when
the command character itself is given, the user may hit
the line kill character to cancel the numerical argument
being formed. In addition, the user may hit the erase
character to redisplay the --More--(xx%) message.
At any time when output is being sent to the terminal, the
user can hit the quit key (normally control-\). More will
stop sending output, and will display the usual --More--
prompt. The user may then enter one of the above commands
in the normal manner. Unfortunately, some output is lost
when this is done, due to the fact that any characters
18, April 4
MORE(1) 1991 MORE(1)
waiting in the terminal's output queue are flushed when
the quit signal occurs.
The terminal is set to noecho mode by this program so that
the output can be continuous. What you type will thus not
show on your terminal, except for the / and ! commands.
If the standard output is not a teletype, then more acts
just like cat, except that a header is printed before each
file (if there is more than one).
A sample usage of more in previewing nroff output would be
nroff -ms +2 doc.n | more -s
FILES
/etc/termcap Terminal data base
/usr/lib/more.help Help file
SEE ALSO
csh(1), man(1), msgs(1), script(1), sh(1), environ(7)
BUGS
Skipping backwards is too slow on large files.
18, April 5