FIND(1) 386BSD Reference Manual FIND(1)
NAME
find - walk a file hierarchy
SYNOPSIS
find [-dsXx] [-f file] [file ...] expression
DESCRIPTION
Find recursively descends the directory tree for each file listed,
evaluating an expression (composed of the ``primaries'' and ``operands''
listed below) in terms of each file in the tree.
If file is a symbolic link referencing an existing file, the directory
tree referenced by the link is descended instead of the link itself.
The options are as follows:
-d The -d option causes find to perform a depth-first traversal,
i.e. directories are visited in post-order and all entries in a
directory will be acted on before the directory itself. By
default, find visits directories in pre-order, i.e. before their
contents. Note, the default is not a breadth-first traversal.
-f The -f option specifies a file hierarchy for find to traverse.
File hierarchies may also be specified as the operands
immediately following the options.
-s The -s option causes the file information and file type (see
stat(2)), returned for each symbolic link to be those of the
file referenced by the link, not the link itself. If the
referenced file does not exist, the file information and type
will be for the link itself.
-X The -X option is a modification to permit find to be safely used
in conjunction with xargs(1). If a file name contains any of the
delimiting characters used by xargs, a diagnostic message is
displayed on standard error, and the file is skipped. The
delimiting characters include single (`` ' '') and double (`` "
'') quotes, backslash (``\''), space, tab and newline characters.
-x The -x option prevents find from descending into directories that
have a device number different than that of the file from which
the descent began.
PRIMARIES
-atime n
True if the difference between the file last access time and the
time find was started, rounded up to the next full 24-hour
period, is n 24-hour periods.
-ctime n
True if the difference between the time of last change of file
status information and the time find was started, rounded up to
the next full 24-hour period, is n 24-hour periods.
-exec utility [argument ...];
True if the program named utility returns a zero value as its
exit status. Optional arguments may be passed to the utility.
The expression must be terminated by a semicolon (``;''). If the
string ``{}'' appears anywhere in the utility name or the
arguments it is replaced by the pathname of the current file.
Utility will be executed from the directory from which find was
executed.
-fstype type
True if the file is contained in a file system of type type.
Currently supported types are ``local'', ``mfs'', ``nfs'',
``msdos'', ``isofs'', ``rdonly'' and ``ufs''. The types
``local'' and ``rdonly'' are not specific file system types. The
former matches any file system physically mounted on the system
where the find is being executed and the latter matches any file
system which is mounted read-only.
-group gname
True if the file belongs to the group gname. If gname is numeric
and there is no such group name, then gname is treated as a group
id.
-inum n
True if the file has inode number n.
-links n
True if the file has n links.
-ls This primary always evaluates to true. The following information
for the current file is written to standard output: its inode
number, size in 512-byte blocks, file permissions, number of hard
links, owner, group, size in bytes, last modification time, and
pathname. If the file is a block or character special file, the
major and minor numbers will be displayed instead of the size in
bytes. If the file is a symbolic link, the pathname of the
linked-to file will be displayed preceded by ``->''. The format
is identical to that produced by ``ls -dgils''.
-mtime n
True if the difference between the file last modification time
and the time find was started, rounded up to the next full
24-hour period, is n 24-hour periods.
-ok utility[argument ...];
The -ok primary is identical to the -exec primary with the
exception that find requests user affirmation for the execution
of the utility by printing a message to the terminal and reading
a response. If the response is other than ``y'' the command is
not executed and the value of the ok expression is false.
-name pattern
True if the last component of the pathname being examined matches
pattern. Special shell pattern matching characters (``['', ``]'',
``*'', and ``?'') may be used as part of pattern. These
characters may be matched explicitly by escaping them with a
backslash (``\'').
-newer file
True if the current file has a more recent last modification time
than file.
-nouser
True if the file belongs to an unknown user.
-nogroup
True if the file belongs to an unknown group.
-path pattern
True if the pathname being examined matches pattern. Special
shell pattern matching characters (``['', ``]'', ``*'', and
``?'') may be used as part of pattern. These characters may be
matched explicitly by escaping them with a backslash (``\'').
Slashes (``/'') are treated as normal characters and do not have
to be matched explicitly.
-perm [-mode]
The mode may be either symbolic (see chmod(1)) or an octal
number. If the mode is symbolic, a starting value of zero is
assumed and the mode sets or clears permissions without regard to
the process' file mode creation mask. If the mode is octal, only
bits 07777 (S_ISUID | S_ISGID | S_ISTXT | S_IRWXU | S_IRWXG |
S_IRWXO) of the file's mode bits participate in the comparison.
If the mode is preceded by a dash (``-''), this primary evaluates
to true if at least all of the bits in the mode are set in the
file's mode bits. If the mode is not preceded by a dash, this
primary evaluates to true if the bits in the mode exactly match
the file's mode bits. Note, the first character of a symbolic
mode may not be a dash (``-'').
-print This primary always evaluates to true. It prints the pathname of
the current file to standard output. The expression is appended
to the user specified expression if neither -exec, -ls or -ok is
specified.
-prune This primary always evaluates to true. It causes find to not
descend into the current file. Note, the -prune primary has no
effect if the -d option was specified.
-size n[c]
True if the file's size, rounded up, in 512-byte blocks is n. If
n is followed by a ``c'', then the primary is true if the file's
size is n bytes.
-type t
True if the file is of the specified type. Possible file types
are as follows:
b block special
c character special
d directory
f regular file
l symbolic link
p FIFO
s socket
-user uname
True if the file belongs to the user uname. If uname is numeric
and there is no such user name, then uname is treated as a user
id.
All primaries which take a numeric argument allow the number to be
preceded by a plus sign (``+'') or a minus sign (``-''). A preceding
plus sign means ``more than n'', a preceding minus sign means ``less than
n'' and neither means ``exactly n'' .
OPERATORS
The primaries may be combined using the following operators. The
operators are listed in order of decreasing precedence.
(expression) This evaluates to true if the parenthesized expression
evaluates to true.
!expression This is the unary NOT operator. It evaluates to true if
the expression is false.
expression -and expression
expression expression
The -and operator is the logical AND operator. As it is
implied by the juxtaposition of two expressions it does not
have to be specified. The expression evaluates to true if
both expressions are true. The second expression is not
evaluated if the first expression is false.
expression -or expression
The -or operator is the logical OR operator. The
expression evaluates to true if either the first or the
second expression is true. The second expression is not
evaluated if the first expression is true.
All operands and primaries must be separate arguments to find. Primaries
which themselves take arguments expect each argument to be a separate
argument to find.
EXAMPLES
The following examples are shown as given to the shell:
find / \! -name "*.c" -print
Print out a list of all the files whose names do not end in
``.c''.
find / -newer ttt -user wnj -print
Print out a list of all the files owned by user ``wnj'' that are
newer than the file ``ttt''.
find / \! \( -newer ttt -user wnj \) -print
Print out a list of all the files which are not both newer than
``ttt'' and owned by ``wnj''.
find / \( -newer ttt -or -user wnj \) -print
Print out a list of all the files that are either owned by ``wnj''
or that are newer than ``ttt''.
SEE ALSO
chmod(1), sh(1), test(1), stat(2), umask(2), getpwent(3),
getgrent(3), strmode(3)
STANDARDS
The find utility syntax is a superset of the syntax specified by the IEEE
Std1003.2 (``POSIX'') standard.
The -s and -X options and the -inum and -ls primaries are extensions to
IEEE Std1003.2 (``POSIX'').
Historically, the -d, -s and -x options were implemented using the
primaries ``-depth'', ``-follow'', and ``-xdev''. These primaries always
evaluated to true. As they were really global variables that took effect
before the traversal began, some legal expressions could have unexpected
results. An example is the expression ``-print -o -depth''. As -print
always evaluates to true, the standard order of evaluation implies that
-depth would never be evaluated. This is not the case.
The operator ``-or'' was implemented as ``-o'', and the operator ``-and''
was implemented as ``-a''.
Historic implementations of the exec and ok primaries did not replace the
string ``{}'' in the utility name or the utility arguments if it had
preceding or following non-whitespace characters. This version replaces
it no matter where in the utility name or arguments it appears.
BUGS
The special characters used by find are also special characters to many
shell programs. In particular, the characters ``*'', ``['', ``]'',
``?'', ``('', ``)'', ``!'', ``\'' and ``;'' may have to be escaped from
the shell.
As there is no delimiter separating options and file names or file names
and the expression, it is difficult to specify files named ``-xdev'' or
``!''. These problems are handled by the -f option and the getopt(3)
``--'' construct.
BSD Experimental July 29, 1991 5