GPINIT(1)               COMMAND REFERENCE               GPINIT(1)



NAME
     gpinit - initialize GPIB

SYNOPSIS
     gpinit -a
     gpinit device...

DESCRIPTION
     gpinit sets the named devices to their stored configuration
     set by gpconf(1).  gpinit -a is invoked during system
     startup to reset all GPIB devices to their previous
     configuration.

EXAMPLES
     Initialize the interface in slot a and attached instruments.

          $ gpinit gpiba
          gpiba slot a addr 0 eom EOI sc tcs
          dm5010 slot a addr 16 eom EOI poll
          fg5010 slot a addr 24 eom EOI poll

FILES
     /etc/gpibconf       current configuration

     /dev/gpibn          GPIB interface device

     /dev/gpidn          GPIB configuration device

     /dev/instrument     GPIB instruments

DIAGNOSTICS
     device slot n addr n ...
                    The named device has been initialized.

     device : file or device already exists
                    There is already a (non-GPIB) device or file
                    by that name.  Use gprm(1) and gpconf(1) to
                    change the name.

     device slot n no interface
                    There is no GPIB interface card in the
                    specified slot.

     Other messages are system errors.  See intro(2) for more
     information on these.

RETURN VALUE
     [NO_ERRS]      Command completed without error.

     [USAGE]        Incorrect command line syntax. Execution
                    terminated.




Printed 5/12/88                                                 1

GPINIT(1)               COMMAND REFERENCE               GPINIT(1)



     [NP_WARN]      An error warranting a warning message
                    occurred. Execution continues.

     [NP_ERR]       An error occurred that was not a system
                    error.  Execution terminated.

     [P_WARN]       A system error occurred. Execution continues.
                    See intro(2) for more information on system
                    errors.

     [P_ERR]        A system error occurred. Execution
                    terminated.  See intro(2) for more
                    information on system errors.

SEE ALSO
     gpconf(1), gprm(1), gpstat(1), gpib(4), gpid(4), gins(4),
     config(8).

     4300 Series Option 3J (F3J) High Speed GPIB Interface
     Reference & Installation



































Printed 5/12/88                                                 2

%%index%%
na:288,76;
sy:364,279;
de:643,490;
ex:1133,317;
fi:1450,327;
di:1777,713;
rv:2490,271;3121,565;
se:3686,492;
%%index%%000000000142