NAME

atmarp − ATM to IP address resolution

SYNOPSIS

atmarp interface

atmarp interface [ IP hostname | IP address ]

atmarp interface - [ ATM address ]

AVAILABILITY

SUNWatmu

DESCRIPTION

The atmarp program may be used to display ATM and IP address pairs for a given ATM interface.  The required parameter interface is a string of the form name unit, such as sa0. 

If only the interface is provided, as in the first form of the command, atmarp will print the ATM address and IP address for that physical interface. 

If additional information is provided, it will be used to identify a device on the subnet to which interface is connected, and the corresponding address information will be printed.  In the second form, when an IP address (in the standard dot notation) or IP hostname is provided, the ATM address for that node will be printed. In the third form, when an ATM address (in the colon-separated octet format used in /etc/aarconfig) is provided, the corresponding IP address will be printed.  Note: in this third form of the command, a hyphen (-) must be included to indicate that an IP hostname/address is not being provided. 

SEE ALSO

ifconfig(1M), aarpd(1M), aarconfig(4), sa(7)

SunOS 2.0  —  Last change: 7 Dec 1994