NAME

ddi_get8, ddi_get16, ddi_get32, ddi_get64, ddi_getb, ddi_getw, ddi_getl, ddi_getll − read data from the mapped memory address, device register or allocated DMA memory address

SYNOPSIS

#include <sys/ddi.h>
#include <sys/sunddi.h>

uint8_t ddi_get8(ddi_acc_handle_t handle, uint8_t ∗dev_addr);

uint16_t ddi_get16(ddi_acc_handle_t handle, uint16_t ∗dev_addr);

uint32_t ddi_get32(ddi_acc_handle_t handle, uint32_t ∗dev_addr);

uint64_t ddi_get64(ddi_acc_handle_t handle, uint64_t ∗dev_addr);

INTERFACE LEVEL

Solaris DDI specific (Solaris DDI). 

ARGUMENTS

handle The data access handle returned from setup calls, such as ddi_regs_map_setup(9F). 

dev_addr Base device address. 

DESCRIPTION

The ddi_get8(), ddi_get16(), ddi_get32(), and ddi_get64() functions read 8 bits, 16 bits, 32 bits and 64 bits of data, respectively, from the device address, dev_addr.

Each individual datum will automatically be translated to maintain a consistent view between the host and the device based on the encoded information in the data access handle.  The translation may involve byte-swapping if the host and the device have incompatible endian characteristics. 

RETURN VALUES

These functions return the value read from the mapped address. 

CONTEXT

These functions can be called from user, kernel, or interrupt context. 

SEE ALSO

ddi_put8(9F), ddi_regs_map_free(9F), ddi_regs_map_setup(9F), ddi_rep_get8(9F), ddi_rep_put8(9F)

NOTES

The functions described in this manual page previously used symbolic names which specified their data access size; the function names have been changed so they now specify a fixed-width data size.  See the following table for the new name equivalents:

SunOS 5.6  —  Last change: 22 Nov 1996