NAME

ibload − initialize image board

SYNOPSIS

/usr/sony/etc/ibload

DESCRIPTION

ibload initializes the image board (NWP-242/243). 

ibload command performs a hardware reset for the image board, and downloads the program /usr/sony/etc/ib.prog. 
Then this command initialize the laser beam printer and the image reader if they are connected.
Finally, ibload prints the version of ib.prog to stdout. 

This command does nothing if the image board is not connected. 

Normally, ibload command is automatically performed in /etc/rc.local at boot time. 

If you execute this command when another process issues a request to the image board, the request is terminated with an error. 

FILES

/usr/sony/etc/ib.progprogram worked on the image board
/dev/ibctrlinterface device

DIAGNOSTICS

Exit status is 0 if success, 1 if an error occurs. 

SEE ALSO

ib(4)

NEWS-OSRelease 4.1C