IR(4) — NEWS-OS Programmer’s Manual

NAME

ir − Image Reader device interface

SYNOPSIS

ir0 at iop addr xxx intr 110 ( xxx is depend on machine type )

/dev/ir

#include <newsiop/imagereader.h>

DESCRIPTION

ir provides the interface to control NEWS Image Reader (NWP-534 + NWB-240A/241A/244,
NWP-540 + NWB-242/243). The Image Reader has many intelligent functions and ir makes most of the functions effectively.
("Image Board Library" is available for NWP-540. You can use the proper functions to NWP-540 through this library.)

Operations will be done through the system call of ‘ioctl’ to /dev/ir, and can be used with C language easily.

DATA FORMAT

The data format of the structures are ;

struct ir_window {
intiw_x;   /∗ X coordinate ∗/
intiw_y;   /∗ Y coordinate ∗/
intiw_dx; /∗ width ∗/
intiw_dy; /∗ height ∗/
};
struct ir_xy {
intiw_x;   /∗ magnification of X axis ∗/
/∗ amount of data ∗/
intiw_y;   /∗ magnification of Y axis ∗/
/∗ amount of data ∗/
};
struct ir_seg {
intis_in; /∗ mode in segment ∗/
intis_out; /∗ mode out of segment ∗/
};

ir_window is the data format for storing the area data.

ir_xy is the data format for storing the data of amount for the magnification and the image data.

ir_seg is the data format for storing the mode of in/out of the segment.

IOCTL

IRIOCINIT : initialization indication

initialize the image reader. ioctl(fildes,IRIOCINIT);

IRIOCHOME : home position indication

return the optics to home position.
(No action taken for NWP-540.) ioctl(fildes,IRIOCHOME);

IRIOCLAMP : lamp indication

define the lamp ON or OFF.
(No action taken for NWP-540.)

#define LAMP_OFF 0 /∗ light is off ∗/
#define LAMP_ON 1 /∗ light is on ∗/
int lamp;
ioctl(fildes,IRIOCLAMP,&lamp);

IRIOCRESOLUTION
: resolution indication

define the resolution.
(For NWP-540, 400 dpi and 240 dpi are also available.)

#define   DPI_300 300   /∗ 300 dpi ∗ /
#define   DPI_200 200   /∗ 200 dpi ∗ /
#define   DPI_150 150   /∗ 150 dpi ∗ /
#define   DPI_75    75   /∗ 75 dpi ∗ /
int resolution;
ioctl(fildes,IRIOCRESOLUTION,&resolution);

IRIOCMIRROR : mirror image indication

set or quit the mirror image mode.

#define NORMAL 0 /∗ normal image ∗/
#define MIRROR 1 /∗ mirror image ∗/
int mirror;
ioctl(fildes,IRIOCMIRROR,&mirror)

IRIOCOUTMODE : output indication

define the output mode (image read mode)
(For NWP-540, "8 x 8 dither for flatbed" pattern is used when pattern 1 or pattern 2 is specified, "4 x 4 dither for flatbed" pattern is used when pattern 3, 4, 5 or 6 is specified, and error if pattern 7 specified.)

#define   BINARY    0    /∗ black and white ∗ /
#define   DIZER1    1    /∗ dither pattern No.1 ∗ /
#define   DIZER2    2    /∗ dither pattern No.2 ∗ /
#define   DIZER3    3    /∗ dither pattern No.3 ∗ /
#define   DIZER4    4    /∗ dither pattern No.4 ∗ /
#define   DIZER5    5    /∗ dither pattern No.5 ∗ /
#define   DIZER6    6    /∗ dither pattern No.6 ∗ /
#define   DIZER7    7    /∗ dither pattern No.7 ∗ /
#define   MULTI     9    /∗ multi ∗ /
int outmode;
ioctl(fildes,IRIOCOUTMODE,&outmode);

IRIOCAREAMODE
: area mode indication

define the output mode in/out of the segment in area mode

#define   BINARY    0    /∗ black and white ∗ /
#define   DIZER1    1    /∗ dither pattern No.1 ∗ /
#define   DIZER2    2    /∗ dither pattern No.2 ∗ /
#define   DIZER3    3    /∗ dither pattern No.3 ∗ /
#define   DIZER4    4    /∗ dither pattern No.4 ∗ /
#define   DIZER5    5    /∗ dither pattern No.5 ∗ /
#define   DIZER6    6    /∗ dither pattern No.6 ∗ /
#define   DIZER7    7    /∗ dither pattern No.7 ∗ /
#define   WHITE     11   /∗ white ∗ /
struct ir_seg seg_outmode;
ioctl(fildes,IRIOCAREAMODE,&seg_outmode)

IRIOCLIGHT : concentration definition

define the concentration of image signal.

int light;
ioctl(fildes,IRIOCLIGHT,&light);

IRIOCNOAE : AE (auto adjust of concentration) indication

define or quit the AE (auto adjust of concentration) mode.

#define AE 0 /∗ AE ON ∗/
#define NO_AE 1 /∗ AE QUIT ∗/
int no_ae;
ioctl(fildes,IRIOCNOAE,&no_ae);

IRIOCREVERSE : nega / posi indication

define the negative or positive mode.

#define POSI 0 /∗ positive mode ∗/
#define NEGA 1 /∗ negative mode ∗/
int reverse;
ioctl(fildes,IRIOCREVERSE,&reverse);

IRIOCAREAREVERSE
: negative/positive indication for area

define the negative or positive mode in area mode

#define POSI 0 /∗ positive ∗/
#define NEGA 1 /∗ negative ∗/
struct ir_seg seg_reverse;
ioctl(fildes,IRIOCAREAREVERSE,&seg_reverse);

IRIOCSCALE : magnification indication

define the magnification to read.

int scale;
ioctl(fildes,IRIOCSCALE,&scale);

IRIOCXYSCALE : self-supporting variable scale indication

define the magnifications for main scanning and sub scanning independently.

struct ir_xy xy scale;
ioctl(fildes,IRIOCXYSCALE,&xy_scale);

IRIOCAREA : area indication

define the area to read.
(Error occurs when illegal size is specified for NWP-540.)

#define      WINDOW               0
#define      A4                   1
#define      A5                   2
#define      B5                   3
#define      B6                   4
#define      ENVELOPE             5
#define      POSTCARD             6
#define      A6                   7
#define      MINI                 10
#define      LETTER               11
#define      NOT_SPECIFIED        99
int area;
ioctl(fildes,IRIOCAREA,&area);

IRIOCWINDOW : window area indication

define the area to be read by the window.

struct ir_window window;
ioctl(fildes,IRIOCWINDOW,&window);

IRIOCSEGMENT : segment area indication

define the segment area.

struct ir_window segment;
ioctl(fildes,IRIOCSEGMENT,&segment);

IRIOCREAD : scanning indication command

define the execution to read.

int area;
ioctl(fildes,IRIOCREAD,&area);

IRIOCAREAREAD
: area scanning indication command

define to execution the scanning area

int area;
ioctl(fildes,IRIOCAREAREAD,&area);

IRIOCMODE : mode report

request the Report No.0 (mode report).
(For NWP-540, the values of im_motor and im_light are always 0.)

struct ir_mode {
intim_resolution;
intim_mirror;
intim_motor;
intim_light;
struct ir_seg im_reverse;
};

struct ir_mode mode;
ioctl(fildes,IRIOCRMODE,&mode);

IRIOCSTATUS : status report

request the Report No.1 (status report).
(For NWP-540, the value ’3’ is returned at is_operatorcall if paper jam occurred. For other cases, the same value as NWP-534 is returned.)

struct ir_status {
intis_error;
intis_timeout;
intis_operator_call;
intis_service_call;
};

struct ir_status status;
ioctl(fildes,IRIOCRSTATUS,&status);

IRIOCPOSITION : position report from the origin.

request the report No.2 (position report from the origin).
(For NWP-540, the position of the light is returned.)

int position;
ioctl(fildes,IRIOCRPOSITION,&position);

IRIOCRWINDOW : window report

request the report No.3 (window report).

struct ir_window window;
ioctl(fildes,IRIOCRWINDOW,&window);

IRIOCLIGHT : concentration report

request the report No.4 (Concentration report).

struct ir_light {
intil_ae;
intil_light;
};
struct ir_light light;
ioctl(fildes,IRIOCRLIGHT,&light);

IRIOCOUTMODE : output mode report

request the report No.5 (output report).

struct ir_seg outmode;
ioctl(fildes,IRIOCROUTMODE,&outmode);

IRIOCSCALE : magnification report

request the report No.6 (magnification report).

struct ir_xy scale;
ioctl(fildes,IRIOCRSCALE,&scale);

IRIOCDATA : number of forwarding data report

request the report No.8 (number of forwarding data report).
‘amount.iw_x’ is the number of bytes for X axis, and ‘amount.iw_y’ is the number of bytes for Y.
These values may differ between NWP-534 and NWP-540: The application program which supports both types of image reader have to get these values by this ioctl.)

struct ir_xy amount;
ioctl(fildes,IRIOCRDATA,&amount);

IRIOCRSELECT : report selection

decide the contents for mode report and output mode report. (For NWP-540, ’0’ is always returned.)

int select;
ioctl(fildes,IRIOCRSELECT,&select);

FILES

/dev/irimage reader device file

Museum