ADDZONE(1M)       K-Talk by Xinet (9/29/94 8.1)       ADDZONE(1M)



     NAME
          /usr/etc/appletalk/addzone - add a zone to a specific
          interface

     SYNOPSIS
          addzone interface zone [ zone ] [ zone ] [...]

     DESCRIPTION
          Addzone uses the AppleTalk Zone Information Protocol to add
          a zone to the network attached to a specific interface.  If
          the zone never appears, it is a sign that the nbpd(1m)
          daemon is malfunctioning.  Adding a zone to the loopback
          (lo0) adds it to the local pseudo-net.  If other routers are
          present on the same network, it is important that each have
          the same list of zones.  This is most easily accomplished by
          designating a ``seed'' router and allowing the other routers
          to obtain their zone lists from it.  K-Talk will attempt to
          obtain a zone list from other routers on the net as well as
          adding those provided through addzone.


     DIAGNOSTICS
          Can't add zones to a Phase 1 network  Phase 1 networks have
                                                only one zone, so
                                                additional zones can
                                                not be specified.

     SEE ALSO
          nbpd(1m), myzone(1), getzones(1)


























     Page 1                                          (printed 3/13/98)