PERLFAQ4(1) PERLFAQ4(1)
NAME
perlfaq4 - Data Manipulation ($Revision: 1.19 $, $Date: 1997/04/24
22:43:57 $)
DESCRIPTION
The section of the FAQ answers question related to the manipulation of
data as numbers, dates, strings, arrays, hashes, and miscellaneous data
issues.
Data: Numbers
Why am I getting long decimals (eg, 19.9499999999999) instead of the
numbers I should be getting (eg, 19.95)?
Internally, your computer represents floating-point numbers in binary.
Floating-point numbers read in from a file, or appearing as literals in
your program, are converted from their decimal floating-point
representation (eg, 19.95) to the internal binary representation.
However, 19.95 can't be precisely represented as a binary floating-point
number, just like 1/3 can't be exactly represented as a decimal
floating-point number. The computer's binary representation of 19.95,
therefore, isn't exactly 19.95.
When a floating-point number gets printed, the binary floating-point
representation is converted back to decimal. These decimal numbers are
displayed in either the format you specify with printf(), or the current
output format for numbers (see the section on $# in the perlvar manpage
if you use print. $# has a different default value in Perl5 than it did
in Perl4. Changing $# yourself is deprecated.
This affects all computer languages that represent decimal floating-point
numbers in binary, not just Perl. Perl provides arbitrary-precision
decimal numbers with the Math::BigFloat module (part of the standard Perl
distribution), but mathematical operations are consequently slower.
To get rid of the superfluous digits, just use a format (eg,
printf("%.2f", 19.95)) to get the required precision.
Why isn't my octal data interpreted correctly?
Perl only understands octal and hex numbers as such when they occur as
literals in your program. If they are read in from somewhere and
assigned, no automatic conversion takes place. You must explicitly use
oct() or hex() if you want the values converted. oct() interprets both
hex ("0x350") numbers and octal ones ("0350" or even without the leading
"0", like "377"), while hex() only converts hexadecimal ones, with or
without a leading "0x", like "0x255", "3A", "ff", or "deadbeef".
This problem shows up most often when people try using chmod(), mkdir(),
umask(), or sysopen(), which all want permissions in octal.
Page 1
PERLFAQ4(1) PERLFAQ4(1)
chmod(644, $file); # WRONG -- perl -w catches this
chmod(0644, $file); # right
Does perl have a round function? What about ceil() and floor()? Trig
functions?
For rounding to a certain number of digits, sprintf() or printf() is
usually the easiest route.
The POSIX module (part of the standard perl distribution) implements
ceil(), floor(), and a number of other mathematical and trigonometric
functions.
In 5.000 to 5.003 Perls, trigonometry was done in the Math::Complex
module. With 5.004, the Math::Trig module (part of the standard perl
distribution) implements the trigonometric functions. Internally it uses
the Math::Complex module and some functions can break out from the real
axis into the complex plane, for example the inverse sine of 2.
Rounding in financial applications can have serious implications, and the
rounding method used should be specified precisely. In these cases, it
probably pays not to trust whichever system rounding is being used by
Perl, but to instead implement the rounding function you need yourself.
How do I convert bits into ints?
To turn a string of 1s and 0s like '10110110' into a scalar containing
its binary value, use the pack() function (documented in the section on
pack in the perlfunc manpage):
$decimal = pack('B8', '10110110');
Here's an example of going the other way:
$binary_string = join('', unpack('B*', "\x29"));
How do I multiply matrices?
Use the Math::Matrix or Math::MatrixReal modules (available from CPAN) or
the PDL extension (also available from CPAN).
How do I perform an operation on a series of integers?
To call a function on each element in an array, and collect the results,
use:
@results = map { my_func($_) } @array;
For example:
Page 2
PERLFAQ4(1) PERLFAQ4(1)
@triple = map { 3 * $_ } @single;
To call a function on each element of an array, but ignore the results:
foreach $iterator (@array) {
&my_func($iterator);
}
To call a function on each integer in a (small) range, you can use:
@results = map { &my_func($_) } (5 .. 25);
but you should be aware that the .. operator creates an array of all
integers in the range. This can take a lot of memory for large ranges.
Instead use:
@results = ();
for ($i=5; $i < 500_005; $i++) {
push(@results, &my_func($i));
}
How can I output Roman numerals?
Get the http://www.perl.com/CPAN/modules/by-module/Roman module.
Why aren't my random numbers random?
The short explanation is that you're getting pseudorandom numbers, not
random ones, because that's how these things work. A longer explanation
is available on http://www.perl.com/CPAN/doc/FMTEYEWTK/random, courtesy
of Tom Phoenix.
You should also check out the Math::TrulyRandom module from CPAN.
Data: Dates
How do I find the week-of-the-year/day-of-the-year?
The day of the year is in the array returned by localtime() (see the
section on localtime in the perlfunc manpage):
$day_of_year = (localtime(time()))[7];
or more legibly (in 5.004 or higher):
use Time::localtime;
$day_of_year = localtime(time())->yday;
You can find the week of the year by dividing this by 7:
Page 3
PERLFAQ4(1) PERLFAQ4(1)
$week_of_year = int($day_of_year / 7);
Of course, this believes that weeks start at zero.
How can I compare two date strings?
Use the Date::Manip or Date::DateCalc modules from CPAN.
How can I take a string and turn it into epoch seconds?
If it's a regular enough string that it always has the same format, you
can split it up and pass the parts to timelocal in the standard
Time::Local module. Otherwise, you should look into one of the Date
modules from CPAN.
How can I find the Julian Day?
Neither Date::Manip nor Date::DateCalc deal with Julian days. Instead,
there is an example of Julian date calculation in
http://www.perl.com/CPAN/authors/David_Muir_Sharnoff/modules/Time/JulianDay.pm.gz,
which should help.
Does Perl have a year 2000 problem?
Not unless you use Perl to create one. The date and time functions
supplied with perl (gmtime and localtime) supply adequate information to
determine the year well beyond 2000 (2038 is when trouble strikes). The
year returned by these functions when used in an array context is the
year minus 1900. For years between 1910 and 1999 this happens to be a 2-
digit decimal number. To avoid the year 2000 problem simply do not treat
the year as a 2-digit number. It isn't.
When gmtime() and localtime() are used in a scalar context they return a
timestamp string that contains a fully-expanded year. For example,
$timestamp = gmtime(1005613200) sets $timestamp to "Tue Nov 13 01:00:00
2001". There's no year 2000 problem here.
Data: Strings
How do I validate input?
The answer to this question is usually a regular expression, perhaps with
auxiliary logic. See the more specific questions (numbers, email
addresses, etc.) for details.
How do I unescape a string?
It depends just what you mean by "escape". URL escapes are dealt with in
the perlfaq9 manpage. Shell escapes with the backslash (\) character are
removed with:
Page 4
PERLFAQ4(1) PERLFAQ4(1)
s/\\(.)/$1/g;
Note that this won't expand \n or \t or any other special escapes.
How do I remove consecutive pairs of characters?
To turn "abbcccd" into "abccd":
s/(.)\1/$1/g;
How do I expand function calls in a string?
This is documented in the perlref manpage. In general, this is fraught
with quoting and readability problems, but it is possible. To
interpolate a subroutine call (in a list context) into a string:
print "My sub returned @{[mysub(1,2,3)]} that time.\n";
If you prefer scalar context, similar chicanery is also useful for
arbitrary expressions:
print "That yields ${\($n + 5)} widgets\n";
See also "How can I expand variables in text strings?" in this section of
the FAQ.
How do I find matching/nesting anything?
This isn't something that can be tackled in one regular expression, no
matter how complicated. To find something between two single characters,
a pattern like /x([^x]*)x/ will get the intervening bits in $1. For
multiple ones, then something more like /alpha(.*?)omega/ would be
needed. But none of these deals with nested patterns, nor can they. For
that you'll have to write a parser.
How do I reverse a string?
Use reverse() in a scalar context, as documented in the reverse entry in
the perlfunc manpage.
$reversed = reverse $string;
How do I expand tabs in a string?
You can do it the old-fashioned way:
1 while $string =~ s/\t+/' ' x (length($&) * 8 - length($`) % 8)/e;
Or you can just use the Text::Tabs module (part of the standard perl
distribution).
Page 5
PERLFAQ4(1) PERLFAQ4(1)
use Text::Tabs;
@expanded_lines = expand(@lines_with_tabs);
How do I reformat a paragraph?
Use Text::Wrap (part of the standard perl distribution):
use Text::Wrap;
print wrap("\t", ' ', @paragraphs);
The paragraphs you give to Text::Wrap may not contain embedded newlines.
Text::Wrap doesn't justify the lines (flush-right).
How can I access/change the first N letters of a string?
There are many ways. If you just want to grab a copy, use substr:
$first_byte = substr($a, 0, 1);
If you want to modify part of a string, the simplest way is often to use
substr() as an lvalue:
substr($a, 0, 3) = "Tom";
Although those with a regexp kind of thought process will likely prefer
$a =~ s/^.../Tom/;
How do I change the Nth occurrence of something?
You have to keep track. For example, let's say you want to change the
fifth occurrence of "whoever" or "whomever" into "whosoever" or
"whomsoever", case insensitively.
$count = 0;
s{((whom?)ever)}{
++$count == 5 # is it the 5th?
? "${2}soever" # yes, swap
: $1 # renege and leave it there
}igex;
How can I count the number of occurrences of a substring within a string?
There are a number of ways, with varying efficiency: If you want a count
of a certain single character (X) within a string, you can use the tr///
function like so:
Page 6
PERLFAQ4(1) PERLFAQ4(1)
$string = "ThisXlineXhasXsomeXx'sXinXit":
$count = ($string =~ tr/X//);
print "There are $count X charcters in the string";
This is fine if you are just looking for a single character. However, if
you are trying to count multiple character substrings within a larger
string, tr/// won't work. What you can do is wrap a while() loop around
a global pattern match. For example, let's count negative integers:
$string = "-9 55 48 -2 23 -76 4 14 -44";
while ($string =~ /-\d+/g) { $count++ }
print "There are $count negative numbers in the string";
How do I capitalize all the words on one line?
To make the first letter of each word upper case:
$line =~ s/\b(\w)/\U$1/g;
This has the strange effect of turning "don't do it" into "Don'T Do It".
Sometimes you might want this, instead (Suggested by Brian Foy
<comdog@computerdog.com>):
$string =~ s/ (
(^\w) #at the beginning of the line
| # or
(\s\w) #preceded by whitespace
)
/\U$1/xg;
$string =~ /([\w']+)/\u\L$1/g;
To make the whole line upper case:
$line = uc($line);
To force each word to be lower case, with the first letter upper case:
$line =~ s/(\w+)/\u\L$1/g;
How can I split a [character] delimited string except when inside
[character]? (Comma-separated files)
Take the example case of trying to split a string that is comma-separated
into its different fields. (We'll pretend you said comma-separated, not
comma-delimited, which is different and almost never what you mean.) You
can't use split(/,/) because you shouldn't split if the comma is inside
quotes. For example, take a data line like this:
Page 7
PERLFAQ4(1) PERLFAQ4(1)
SAR001,"","Cimetrix, Inc","Bob Smith","CAM",N,8,1,0,7,"Error, Core Dumped"
Due to the restriction of the quotes, this is a fairly complex problem.
Thankfully, we have Jeffrey Friedl, author of a highly recommended book
on regular expressions, to handle these for us. He suggests (assuming
your string is contained in $text):
@new = ();
push(@new, $+) while $text =~ m{
"([^\"\\]*(?:\\.[^\"\\]*)*)",? # groups the phrase inside the quotes
| ([^,]+),?
| ,
}gx;
push(@new, undef) if substr($text,-1,1) eq ',';
If you want to represent quotation marks inside a quotation-mark-
delimited field, escape them with backslashes (eg, "like \"this\"".
Unescaping them is a task addressed earlier in this section.
Alternatively, the Text::ParseWords module (part of the standard perl
distribution) lets you say:
use Text::ParseWords;
@new = quotewords(",", 0, $text);
How do I strip blank space from the beginning/end of a string?
The simplest approach, albeit not the fastest, is probably like this:
$string =~ s/^\s*(.*?)\s*$/$1/;
It would be faster to do this in two steps:
$string =~ s/^\s+//;
$string =~ s/\s+$//;
Or more nicely written as:
for ($string) {
s/^\s+//;
s/\s+$//;
}
How do I extract selected columns from a string?
Use substr() or unpack(), both documented in the perlfunc manpage.
Page 8
PERLFAQ4(1) PERLFAQ4(1)
How do I find the soundex value of a string?
Use the standard Text::Soundex module distributed with perl.
How can I expand variables in text strings?
Let's assume that you have a string like:
$text = 'this has a $foo in it and a $bar';
$text =~ s/\$(\w+)/${$1}/g;
Before version 5 of perl, this had to be done with a double-eval
substitution:
$text =~ s/(\$\w+)/$1/eeg;
Which is bizarre enough that you'll probably actually need an EEG
afterwards. :-)
See also "How do I expand function calls in a string?" in this section of
the FAQ.
What's wrong with always quoting "$vars"?
The problem is that those double-quotes force stringification, coercing
numbers and references into strings, even when you don't want them to be.
If you get used to writing odd things like these:
print "$var"; # BAD
$new = "$old"; # BAD
somefunc("$var"); # BAD
You'll be in trouble. Those should (in 99.8% of the cases) be the
simpler and more direct:
print $var;
$new = $old;
somefunc($var);
Otherwise, besides slowing you down, you're going to break code when the
thing in the scalar is actually neither a string nor a number, but a
reference:
func(\@array);
sub func {
my $aref = shift;
my $oref = "$aref"; # WRONG
}
You can also get into subtle problems on those few operations in Perl
that actually do care about the difference between a string and a number,
Page 9
PERLFAQ4(1) PERLFAQ4(1)
such as the magical ++ autoincrement operator or the syscall() function.
Why don't my <<HERE documents work?
Check for these three things:
1. There must be no space after the << part.
2. There (probably) should be a semicolon at the end.
3. You can't (easily) have any space in front of the tag.
Data: Arrays
What is the difference between $array[1] and @array[1]?
The former is a scalar value, the latter an array slice, which makes it a
list with one (scalar) value. You should use $ when you want a scalar
value (most of the time) and @ when you want a list with one scalar value
in it (very, very rarely; nearly never, in fact).
Sometimes it doesn't make a difference, but sometimes it does. For
example, compare:
$good[0] = `some program that outputs several lines`;
with
@bad[0] = `same program that outputs several lines`;
The -w flag will warn you about these matters.
How can I extract just the unique elements of an array?
There are several possible ways, depending on whether the array is
ordered and whether you wish to preserve the ordering.
a) If @in is sorted, and you want @out to be sorted:
$prev = 'nonesuch';
@out = grep($_ ne $prev && ($prev = $_), @in);
This is nice in that it doesn't use much extra memory, simulating
uniq(1)'s behavior of removing only adjacent duplicates.
b) If you don't know whether @in is sorted:
undef %saw;
@out = grep(!$saw{$_}++, @in);
Page 10
PERLFAQ4(1) PERLFAQ4(1)
c) Like (b), but @in contains only small integers:
@out = grep(!$saw[$_]++, @in);
d) A way to do (b) without any loops or greps:
undef %saw;
@saw{@in} = ();
@out = sort keys %saw; # remove sort if undesired
e) Like (d), but @in contains only small positive integers:
undef @ary;
@ary[@in] = @in;
@out = @ary;
How can I tell whether an array contains a certain element?
There are several ways to approach this. If you are going to make this
query many times and the values are arbitrary strings, the fastest way is
probably to invert the original array and keep an associative array lying
about whose keys are the first array's values.
@blues = qw/azure cerulean teal turquoise lapis-lazuli/;
undef %is_blue;
for (@blues) { $is_blue{$_} = 1 }
Now you can check whether $is_blue{$some_color}. It might have been a
good idea to keep the blues all in a hash in the first place.
If the values are all small integers, you could use a simple indexed
array. This kind of an array will take up less space:
@primes = (2, 3, 5, 7, 11, 13, 17, 19, 23, 29, 31);
undef @is_tiny_prime;
for (@primes) { $is_tiny_prime[$_] = 1; }
Now you check whether $is_tiny_prime[$some_number].
If the values in question are integers instead of strings, you can save
quite a lot of space by using bit strings instead:
@articles = ( 1..10, 150..2000, 2017 );
undef $read;
grep (vec($read,$_,1) = 1, @articles);
Now check whether vec($read,$n,1) is true for some $n.
Page 11
PERLFAQ4(1) PERLFAQ4(1)
Please do not use
$is_there = grep $_ eq $whatever, @array;
or worse yet
$is_there = grep /$whatever/, @array;
These are slow (checks every element even if the first matches),
inefficient (same reason), and potentially buggy (what if there are
regexp characters in $whatever?).
How do I compute the difference of two arrays? How do I compute the
intersection of two arrays?
Use a hash. Here's code to do both and more. It assumes that each
element is unique in a given array:
@union = @intersection = @difference = ();
%count = ();
foreach $element (@array1, @array2) { $count{$element}++ }
foreach $element (keys %count) {
push @union, $element;
push @{ $count{$element} > 1 ? \@intersection : \@difference }, $element;
}
How do I find the first array element for which a condition is true?
You can use this if you care about the index:
for ($i=0; $i < @array; $i++) {
if ($array[$i] eq "Waldo") {
$found_index = $i;
last;
}
}
Now $found_index has what you want.
How do I handle linked lists?
In general, you usually don't need a linked list in Perl, since with
regular arrays, you can push and pop or shift and unshift at either end,
or you can use splice to add and/or remove arbitrary number of elements
at arbitrary points.
If you really, really wanted, you could use structures as described in
the perldsc manpage or the perltoot manpage and do just what the
algorithm book tells you to do.
Page 12
PERLFAQ4(1) PERLFAQ4(1)
How do I handle circular lists?
Circular lists could be handled in the traditional fashion with linked
lists, or you could just do something like this with an array:
unshift(@array, pop(@array)); # the last shall be first
push(@array, shift(@array)); # and vice versa
How do I shuffle an array randomly?
Here's a shuffling algorithm which works its way through the list,
randomly picking another element to swap the current element with:
srand;
@new = ();
@old = 1 .. 10; # just a demo
while (@old) {
push(@new, splice(@old, rand @old, 1));
}
For large arrays, this avoids a lot of the reshuffling:
srand;
@new = ();
@old = 1 .. 10000; # just a demo
for( @old ){
my $r = rand @new+1;
push(@new,$new[$r]);
$new[$r] = $_;
}
How do I process/modify each element of an array?
Use for/foreach:
for (@lines) {
s/foo/bar/;
tr[a-z][A-Z];
}
Here's another; let's compute spherical volumes:
for (@radii) {
$_ **= 3;
$_ *= (4/3) * 3.14159; # this will be constant folded
}
Page 13
PERLFAQ4(1) PERLFAQ4(1)
How do I select a random element from an array?
Use the rand() function (see the rand entry in the perlfunc manpage):
srand; # not needed for 5.004 and later
$index = rand @array;
$element = $array[$index];
How do I permute N elements of a list?
Here's a little program that generates all permutations of all the words
on each line of input. The algorithm embodied in the permut() function
should work on any list:
#!/usr/bin/perl -n
# permute - tchrist@perl.com
permut([split], []);
sub permut {
my @head = @{ $_[0] };
my @tail = @{ $_[1] };
unless (@head) {
# stop recursing when there are no elements in the head
print "@tail\n";
} else {
# for all elements in @head, move one from @head to @tail
# and call permut() on the new @head and @tail
my(@newhead,@newtail,$i);
foreach $i (0 .. $#head) {
@newhead = @head;
@newtail = @tail;
unshift(@newtail, splice(@newhead, $i, 1));
permut([@newhead], [@newtail]);
}
}
}
How do I sort an array by (anything)?
Supply a comparison function to sort() (described in the sort entry in
the perlfunc manpage):
@list = sort { $a <=> $b } @list;
The default sort function is cmp, string comparison, which would sort (1,
2, 10) into (1, 10, 2). <=>, used above, is the numerical comparison
operator.
If you have a complicated function needed to pull out the part you want
to sort on, then don't do it inside the sort function. Pull it out
first, because the sort BLOCK can be called many times for the same
Page 14
PERLFAQ4(1) PERLFAQ4(1)
element. Here's an example of how to pull out the first word after the
first number on each item, and then sort those words case-insensitively.
@idx = ();
for (@data) {
($item) = /\d+\s*(\S+)/;
push @idx, uc($item);
}
@sorted = @data[ sort { $idx[$a] cmp $idx[$b] } 0 .. $#idx ];
Which could also be written this way, using a trick that's come to be
known as the Schwartzian Transform:
@sorted = map { $_->[0] }
sort { $a->[1] cmp $b->[1] }
map { [ $_, uc((/\d+\s*(\S+)/ )[0] ] } @data;
If you need to sort on several fields, the following paradigm is useful.
@sorted = sort { field1($a) <=> field1($b) ||
field2($a) cmp field2($b) ||
field3($a) cmp field3($b)
} @data;
This can be conveniently combined with precalculation of keys as given
above.
See http://www.perl.com/CPAN/doc/FMTEYEWTK/sort.html for more about this
approach.
See also the question below on sorting hashes.
How do I manipulate arrays of bits?
Use pack() and unpack(), or else vec() and the bitwise operations.
For example, this sets $vec to have bit N set if $ints[N] was set:
$vec = '';
foreach(@ints) { vec($vec,$_,1) = 1 }
And here's how, given a vector in $vec, you can get those bits into your
@ints array:
Page 15
PERLFAQ4(1) PERLFAQ4(1)
sub bitvec_to_list {
my $vec = shift;
my @ints;
# Find null-byte density then select best algorithm
if ($vec =~ tr/\0// / length $vec > 0.95) {
use integer;
my $i;
# This method is faster with mostly null-bytes
while($vec =~ /[^\0]/g ) {
$i = -9 + 8 * pos $vec;
push @ints, $i if vec($vec, ++$i, 1);
push @ints, $i if vec($vec, ++$i, 1);
push @ints, $i if vec($vec, ++$i, 1);
push @ints, $i if vec($vec, ++$i, 1);
push @ints, $i if vec($vec, ++$i, 1);
push @ints, $i if vec($vec, ++$i, 1);
push @ints, $i if vec($vec, ++$i, 1);
push @ints, $i if vec($vec, ++$i, 1);
}
} else {
# This method is a fast general algorithm
use integer;
my $bits = unpack "b*", $vec;
push @ints, 0 if $bits =~ s/^(\d)// && $1;
push @ints, pos $bits while($bits =~ /1/g);
}
return \@ints;
}
This method gets faster the more sparse the bit vector is. (Courtesy of
Tim Bunce and Winfried Koenig.)
Why does defined() return true on empty arrays and hashes?
See the defined entry in the perlfunc manpage in the 5.004 release or
later of Perl.
Data: Hashes (Associative Arrays)
How do I process an entire hash?
Use the each() function (see the each entry in the perlfunc manpage) if
you don't care whether it's sorted:
while (($key,$value) = each %hash) {
print "$key = $value\n";
}
If you want it sorted, you'll have to use foreach() on the result of
sorting the keys as shown in an earlier question.
Page 16
PERLFAQ4(1) PERLFAQ4(1)
What happens if I add or remove keys from a hash while iterating over it?
Don't do that.
How do I look up a hash element by value?
Create a reverse hash:
%by_value = reverse %by_key;
$key = $by_value{$value};
That's not particularly efficient. It would be more space-efficient to
use:
while (($key, $value) = each %by_key) {
$by_value{$value} = $key;
}
If your hash could have repeated values, the methods above will only find
one of the associated keys. This may or may not worry you.
How can I know how many entries are in a hash?
If you mean how many keys, then all you have to do is take the scalar
sense of the keys() function:
$num_keys = scalar keys %hash;
In void context it just resets the iterator, which is faster for tied
hashes.
How do I sort a hash (optionally by value instead of key)?
Internally, hashes are stored in a way that prevents you from imposing an
order on key-value pairs. Instead, you have to sort a list of the keys
or values:
@keys = sort keys %hash; # sorted by key
@keys = sort {
$hash{$a} cmp $hash{$b}
} keys %hash; # and by value
Here we'll do a reverse numeric sort by value, and if two keys are
identical, sort by length of key, and if that fails, by straight ASCII
comparison of the keys (well, possibly modified by your locale -- see the
perllocale manpage).
Page 17
PERLFAQ4(1) PERLFAQ4(1)
@keys = sort {
$hash{$b} <=> $hash{$a}
||
length($b) <=> length($a)
||
$a cmp $b
} keys %hash;
How can I always keep my hash sorted?
You can look into using the DB_File module and tie() using the $DB_BTREE
hash bindings as documented in the section on In Memory Databases in the
DB_File manpage.
What's the difference between "delete" and "undef" with hashes?
Hashes are pairs of scalars: the first is the key, the second is the
value. The key will be coerced to a string, although the value can be
any kind of scalar: string, number, or reference. If a key $key is
present in the array, exists($key) will return true. The value for a
given key can be undef, in which case $array{$key} will be undef while
$exists{$key} will return true. This corresponds to ($key, undef) being
in the hash.
Pictures help... here's the %ary table:
keys values
+------+------+
| a | 3 |
| x | 7 |
| d | 0 |
| e | 2 |
+------+------+
And these conditions hold
$ary{'a'} is true
$ary{'d'} is false
defined $ary{'d'} is true
defined $ary{'a'} is true
exists $ary{'a'} is true (perl5 only)
grep ($_ eq 'a', keys %ary) is true
If you now say
undef $ary{'a'}
your table now reads:
Page 18
PERLFAQ4(1) PERLFAQ4(1)
keys values
+------+------+
| a | undef|
| x | 7 |
| d | 0 |
| e | 2 |
+------+------+
and these conditions now hold; changes in caps:
$ary{'a'} is FALSE
$ary{'d'} is false
defined $ary{'d'} is true
defined $ary{'a'} is FALSE
exists $ary{'a'} is true (perl5 only)
grep ($_ eq 'a', keys %ary) is true
Notice the last two: you have an undef value, but a defined key!
Now, consider this:
delete $ary{'a'}
your table now reads:
keys values
+------+------+
| x | 7 |
| d | 0 |
| e | 2 |
+------+------+
and these conditions now hold; changes in caps:
$ary{'a'} is false
$ary{'d'} is false
defined $ary{'d'} is true
defined $ary{'a'} is false
exists $ary{'a'} is FALSE (perl5 only)
grep ($_ eq 'a', keys %ary) is FALSE
See, the whole entry is gone!
Why don't my tied hashes make the defined/exists distinction?
They may or may not implement the EXISTS() and DEFINED() methods
differently. For example, there isn't the concept of undef with hashes
that are tied to DBM* files. This means the true/false tables above will
give different results when used on such a hash. It also means that
exists and defined do the same thing with a DBM* file, and what they end
up doing is not what they do with ordinary hashes.
Page 19
PERLFAQ4(1) PERLFAQ4(1)
How do I reset an each() operation part-way through?
Using keys %hash in a scalar context returns the number of keys in the
hash and resets the iterator associated with the hash. You may need to
do this if you use last to exit a loop early so that when you re-enter
it, the hash iterator has been reset.
How can I get the unique keys from two hashes?
First you extract the keys from the hashes into arrays, and then solve
the uniquifying the array problem described above. For example:
%seen = ();
for $element (keys(%foo), keys(%bar)) {
$seen{$element}++;
}
@uniq = keys %seen;
Or more succinctly:
@uniq = keys %{{%foo,%bar}};
Or if you really want to save space:
%seen = ();
while (defined ($key = each %foo)) {
$seen{$key}++;
}
while (defined ($key = each %bar)) {
$seen{$key}++;
}
@uniq = keys %seen;
How can I store a multidimensional array in a DBM file?
Either stringify the structure yourself (no fun), or else get the MLDBM
(which uses Data::Dumper) module from CPAN and layer it on top of either
DB_File or GDBM_File.
How can I make my hash remember the order I put elements into it?
Use the Tie::IxHash from CPAN.
use Tie::IxHash;
tie(%myhash, Tie::IxHash);
for ($i=0; $i<20; $i++) {
$myhash{$i} = 2*$i;
}
@keys = keys %myhash;
# @keys = (0,1,2,3,...)
Page 20
PERLFAQ4(1) PERLFAQ4(1)
Why does passing a subroutine an undefined element in a hash create it?
If you say something like:
somefunc($hash{"nonesuch key here"});
Then that element "autovivifies"; that is, it springs into existence
whether you store something there or not. That's because functions get
scalars passed in by reference. If somefunc() modifies $_[0], it has to
be ready to write it back into the caller's version.
This has been fixed as of perl5.004.
Normally, merely accessing a key's value for a nonexistent key does not
cause that key to be forever there. This is different than awk's
behavior.
How can I make the Perl equivalent of a C structure/C++ class/hash or
array of hashes or arrays?
Use references (documented in the perlref manpage). Examples of complex
data structures are given in the perldsc manpage and the perllol manpage.
Examples of structures and object-oriented classes are in the perltoot
manpage.
How can I use a reference as a hash key?
You can't do this directly, but you could use the standard Tie::Refhash
module distributed with perl.
Data: Misc
How do I handle binary data correctly?
Perl is binary clean, so this shouldn't be a problem. For example, this
works fine (assuming the files are found):
if (`cat /vmunix` =~ /gzip/) {
print "Your kernel is GNU-zip enabled!\n";
}
On some systems, however, you have to play tedious games with "text"
versus "binary" files. See the section on binmode in the perlfunc
manpage.
If you're concerned about 8-bit ASCII data, then see the perllocale
manpage.
If you want to deal with multibyte characters, however, there are some
gotchas. See the section on Regular Expressions.
Page 21
PERLFAQ4(1) PERLFAQ4(1)
How do I determine whether a scalar is a number/whole/integer/float?
Assuming that you don't care about IEEE notations like "NaN" or
"Infinity", you probably just want to use a regular expression.
warn "has nondigits" if /\D/;
warn "not a whole number" unless /^\d+$/;
warn "not an integer" unless /^-?\d+$/; # reject +3
warn "not an integer" unless /^[+-]?\d+$/;
warn "not a decimal number" unless /^-?\d+\.?\d*$/; # rejects .2
warn "not a decimal number" unless /^-?(?:\d+(?:\.\d*)?|\.\d+)$/;
warn "not a C float"
unless /^([+-]?)(?=\d|\.\d)\d*(\.\d*)?([Ee]([+-]?\d+))?$/;
Or you could check out http://www.perl.com/CPAN/modules/by-
module/String/String-Scanf-1.1.tar.gz instead. The POSIX module (part of
the standard Perl distribution) provides the strtol and strtod for
converting strings to double and longs, respectively.
How do I keep persistent data across program calls?
For some specific applications, you can use one of the DBM modules. See
the AnyDBM_File manpage. More generically, you should consult the
FreezeThaw, Storable, or Class::Eroot modules from CPAN.
How do I print out or copy a recursive data structure?
The Data::Dumper module on CPAN is nice for printing out data structures,
and FreezeThaw for copying them. For example:
use FreezeThaw qw(freeze thaw);
$new = thaw freeze $old;
Where $old can be (a reference to) any kind of data structure you'd like.
It will be deeply copied.
How do I define methods for every class/object?
Use the UNIVERSAL class (see the UNIVERSAL manpage).
How do I verify a credit card checksum?
Get the Business::CreditCard module from CPAN.
AUTHOR AND COPYRIGHT
Copyright (c) 1997 Tom Christiansen and Nathan Torkington. All rights
reserved. See the perlfaq manpage for distribution information.
Page 22
PERLFAQ4(1) PERLFAQ4(1)
Page 23