GFEControl(1) UNIX System V GFEControl(1)
NAME
GFEControl - Phobos Fast Ethernet driver controller (GUI)
SYNOPSIS
/usr/bin/GFEControl
DESCRIPTION
GFEControl allows the user to query the duplex state or the
speed state of the current Phobos Fast Ethernet interface.
The root user can also set the duplex and the speed.
If the adapter is connected to a device which supports
full-duplex operation GFEControl can be used to place the
adapter in full-duplex mode. Otherwise, the adapter runs in
standard (half-duplex) mode.
The Phobos Fast Ethernet Adapter supports both 10BaseT and
100BaseT. By default the driver is configured to use
100BaseT, but can be changed using GFEControl to use
10BaseT. Note that the hub or switch must support the speed
that the driver is configured for.
The GFEControl utility can also be started from the
ControlPanels page of the
FILES
/usr/lib/filetype/local/Phobos.GFEControl.ftr
/usr/lib/filetype/local/iconlib/Phobos.GFEControl.fti
SEE ALSO
gfecontrol(1)
AUTHOR
Copyright 1996,1997,1998 Phobos Corporation
All Rights Reserved
Page 1 (printed 1/2/98)