NAME

sgilabel − print the SGI disk label from a drive

SYNOPSIS

sgilabel drive
or
sgilabel fs

DESCRIPTION

Sgilabel has two forms.  If a drive is specified (e.g., md0, ip1), sgilabel will print out the whole drive label, as defined in the fex documentation.  This information includes the drive label, serial number, type of drive and controller, size (cylinders/heads/sectors), and the sizes of each file system on the drive. 

If a fs (file system) is specified (e.g., md0a, ip1d), sgilabel will print out the size of the file system and the size of a cylinder (both in 512 byte blocks).  (Newfs(1) uses this information.)

FILES

/dev/md*hThe h partition accesses the label
/dev/ip*hThe h partition accesses the label

SEE ALSO

newfs(1)

Version 2.1  —  January 02, 1985