PS(1) PS(1)
NAME
ps - report process status
SYNOPSIS
ps [ options ]
DESCRIPTION
ps prints certain information about active processes.
Without options, information is printed about processes
associated with the controlling terminal. The output
consists of a short listing containing only the process ID,
terminal identifier, cumulative execution time, and the
command name. Otherwise, the information that is displayed
is controlled by the selection of options.
Options accept names or lists as arguments. Arguments can
be either separated from one another by commas or enclosed
in double quotes and separated from one another by commas or
spaces. Values for proclist and grplist must be numeric.
The options are given in descending order according to
volume and range of information provided:
-e Print information about every process now
running.
-d Print information about all processes except
process group leaders.
-a Print information about all processes most
frequently requested: all those except process
group leaders and processes not associated with
a terminal.
-f Generate a full listing. (See below for
significance of columns in a full listing.)
-l Generate a long listing. (See below.)
-n name Take argument signifying an alternate system
name in place of /unix.
-t termlist List only process data associated with the
terminal given in termlist. Terminal
identifiers may be specified in one of two
forms: the device's file name (e.g., tty04) or,
if the device's file name starts with tty, just
the digit identifier (e.g., 04).
-p proclist List only process data whose process ID numbers
are given in proclist.
-u uidlist List only process data whose user ID number or
login name is given in uidlist. In the listing,
the numerical user ID will be printed unless you
give the -f option, which prints the login name.
-g grplist List only process data whose process group
leader's ID number(s) appears in grplist. (A
group leader is a process whose process ID
number is identical to its process group ID
Page 1 (last mod. 8/20/87)
PS(1) PS(1)
number. A login shell is a common example of a
process group leader.)
Under the -f option, ps tries to determine the command name
and arguments given when the process was created by
examining the user block. Failing this, the command name is
printed, as it would have appeared without the -f option, in
square brackets.
The column headings and the meaning of the columns in a ps
listing are given below; the letters f and l indicate the
option (full or long, respectively) that causes the
corresponding heading to appear; all means that the heading
always appears. Note that these two options determine only
what information is provided for a process; they do not
determine which processes will be listed.
F (l) Flags (hexadecimal and additive) associated
with the process
VAX PROCESSOR
00 Process has terminated: process
table entry now available.
01 Process currently in primary
memory.
02 A system process: always in primary
memory.
04 Process is currently in primary
memory: locked until an event
completes.
08 Should not occur on this system.
10 Parent is tracing process.
20 Tracing parent's signal has stopped
process: parent is waiting
[ptrace(2)].
S (l) The state of the process:
(the login name is printed under the -f
option).
PID (all) The process ID of the process (this datum
is necessary in order to kill a process).
PPID (f,l) The process ID of the parent process.
C (f,l) Processor utilization for scheduling.
PRI (l) The priority of the process (higher numbers
mean lower priority).
NI (l) Nice value, used in priority computation.
ADDR (l) The memory address of the process.
SZ (l) The size (in pages or clicks) of the
swappable process's image in main memory.
WCHAN (l) The address of an event for which the
process is sleeping, or in SXBRK state, (if
Page 2 (last mod. 8/20/87)
PS(1) PS(1)
blank, the process is running).
STIME (f) The starting time of the process, given in
hours, minutes, and seconds. (A process
begun more than twenty-four hours before
the ps inquiry is executed is given in
months and days.)
TTY (all) The controlling terminal for the process
(the message, ?, is printed when there is
no controlling terminal).
TIME (all) The cumulative execution time for the
process.
COMMAND(all) The command name (the full command name and
its arguments are printed under the -f
option).
A process that has exited and has a parent, but has not yet
been waited for by the parent, is marked <defunct>.
FILES
/dev
/dev/sxt/*
/dev/tty*
/dev/xt/* terminal (``tty'') names searcher files
/dev/kmem kernel virtual memory
/dev/swap the default swap device
/dev/mem memory
/etc/passwd UID information supplier
/etc/ps_data internal data structure
/unix system namelist
SEE ALSO
kill(1), nice(1).
getty(1M) in the System Administrator's Reference Manual.
WARNING
Things can change while ps is running; the snap-shot it
gives is only true for a split-second, and it may not be
accurate by the time you see it. Some data printed for
defunct processes is irrelevant.
If no termlist, proclist, uidlist, or grplist is specified,
ps checks stdin, stdout, and stderr in that order, looking
for the controlling terminal and will attempt to report on
processes associated with the controlling terminal. In this
situation, if stdin, stdout, and stderr are all redirected,
ps will not find a controlling terminal, so there will be no
report.
Page 3 (last mod. 8/20/87)
PS(1) PS(1)
On a heavily loaded system, ps may report an lseek(2) error
and exit. ps may seek to an invalid user area address:
having got the address of a process' user area, ps may not
be able to seek to that address before the process exits and
the address becomes invalid.
ps -ef may not report the actual start of a tty login
session, but rather an earlier time, when a getty was last
respawned on the tty line.
ORIGIN
AT&T V.3
Page 4 (last mod. 8/20/87)