ldsysdump(ADM)                06 January 1993                 ldsysdump(ADM)


 Name

    ldsysdump - load a system memory image dump

 Syntax

    ldsysdump file

 Description

    ldsysdump is used to load a system memory image dump from tape or floppy
    disk to a file.  After entering the command, ldsysdump prompts you for
    information.  You should be prepared to supply the following information:

    +  If you are loading from a floppy , you will need to supply the floppy
       drive number (if you are not using the default /dev/rfd0).

    +  If you are loading from a floppy , you will need to enter the type of
       floppy. Valid types are:

       -  double density 360 KB diskettes

       -  quad density 1.2 MB diskettes

       -  double density 720 KB diskettes

       -  high density 1.44 MB diskettes

    +  If you are loading from a tape, you will need to enter the type of
       tape. Valid types are:

       -  /dev/rct0

       -  /dev/rctmini

    +  You will be asked how many megabytes of memory image you want to load.

 See also

    crash(ADM)