IP(ADMP) UNIX System V
Name
ip - Internet Protocol
Syntax
#include <sys/socket.h>
#include <netinet/in.h>
s = socket(AFINET, SOCKRAW, proto);
Description
IP is the network layer protocol used by the Internet
protocol family. Options may be set at the IP level when
using higher-level protocols that are based on IP (such as
TCP and UDP). It may also be accessed through a ``raw
socket'' or device when developing new protocols or special
purpose applications.
A single generic option IP_OPTIONS, is supported at the IP
level, and may be used to provide IP options to be
transmitted in the IP header of each outgoing packet.
Options are set with setsockopt and examined with getsockopt
. [See getsockopt(SSC).] The format of IP options to be sent
is that specified by the IP protocol specification, with one
exception: the list of addresses for Source Route options
must include the first-hop gateway at the beginning of the
list of gateways. The first-hop gateway address will be
extracted from the option list and the size adjusted
accordingly before use. IP options may be used with any
socket type in the Internet family.
Raw IP sockets are connectionless, and are normally used
with the sendto and recvfrom calls; the connect(SSC) call
may also be used to fix the destination for future packets
(in which case, the read(S) or recv(SSC), and write(S) or
send(SSC) system calls may be used).
If proto is 0, the default protocol IPPROTO_RAW is used for
outgoing packets, and only incoming packets destined for
that protocol are received. If proto is non-zero, that
protocol number will be used on outgoing packets and to
filter incoming packets. Proto must be specified in
sockcf(SFF).
Outgoing packets automatically have an IP header prepended
to them (based on the destination address given and the
protocol number the socket is created with). Incoming
packets are received with IP header and options intact.
Diagnostics
A socket operation may fail with one of the following errors
returned:
[EISCONN]
when trying to establish a connection on a
socket which already has one, or when trying
to send a datagram with the destination
address specified and the socket already
connected;
[ENOTCONN]
when trying to send a datagram, but no
destination address is specified, and the
socket has not been connected;
[ENOSR]
when the system runs out of memory for an
internal data structure;
[EADDRNOTAVAIL]
when an attempt is made to create a socket
with a network address for which no network
interface exists.
The following errors specific to IP may occur when setting
or getting IP options:
[EINVAL]
An unknown socket option name was given.
[EINVAL]
The IP option field was improperly formed; an
option field was shorter than the minimum
value or longer than the option buffer
provided.
Files
/dev/inet/ip
/dev/inet/rip
See Also
getsockopt(SSC), send(SSC), recv(SSC), sockcf(SFF),
intro(ADMP), icmp(ADMP), inet(ADMP).
(printed 8/17/89) IP(ADMP)