elf_flag(3E) elf_flag(3E)
NAME
elf_flag: elf_flagdata, elf_flagehdr, elf_flagelf,
elf_flagphdr, elf_flagscn, elf_flagshdr - manipulate flags
SYNOPSIS
cc [flag . . . ] file . . . -lelf [library] . . .
#include <libelf.h>
unsigned elf_flagdata(Elf_Data *data, Elf_Cmd cmd, unsigned flags);
unsigned elf_flagehdr(Elf *elf, Elf_Cmd cmd, unsigned flags);
unsigned elf_flagelf(Elf *elf, Elf_Cmd cmd, unsigned flags);
unsigned elf_flagphdr(Elf *elf, Elf_Cmd cmd, unsigned flags);
unsigned elf_flagscn(Elf_Scn *scn, Elf_Cmd cmd, unsigned flags);
unsigned elf_flagshdr(Elf_Scn *scn, Elf_Cmd cmd, unsigned flags);
DESCRIPTION
These functions manipulate the flags associated with various
structures of an ELF file. Given an ELF descriptor elf, a
data descriptor data, or a section descriptor scn, the
functions may set or clear the associated status bits,
returning the updated bits. A null descriptor is allowed, to
simplify error handling; all functions return zero for this
degenerate case.
cmd may have the following values.
ELF_C_CLR The functions clear the bits that are
asserted in flags. Only the non-zero bits
in flags are cleared; zero bits do not
change the status of the descriptor.
ELF_C_SET The functions set the bits that are asserted
in flags. Only the non-zero bits in flags
are set; zero bits do not change the status
of the descriptor.
Descriptions of the defined flags bits appear below.
ELF_F_DIRTY When the program intends to write an ELF
file, this flag asserts the associated
information needs to be written to the file.
Thus, for example, a program that wished to
update the ELF header of an existing file
would call elf_flagehdr with this bit set in
flags and cmd equal to ELF_C_SET. A later
call to elf_update would write the marked
header to the file.
Copyright 1994 Novell, Inc. Page 1
elf_flag(3E) elf_flag(3E)
ELF_F_LAYOUT Normally, the library decides how to arrange
an output file. That is, it automatically
decides where to place sections, how to
align them in the file, etc. If this bit is
set for an ELF descriptor, the program
assumes responsibility for determining all
file positions. This bit is meaningful only
for elf_flagelf and applies to the entire
file associated with the descriptor.
When a flag bit is set for an item, it affects all the
subitems as well. Thus, for example, if the program sets the
ELF_F_DIRTY bit with elf_flagelf, the entire logical file is
``dirty.''
EXAMPLES
The following fragment shows how one might mark the ELF header
to be written to the output file.
ehdr = elf32_getehdr(elf);
/* dirty ehdr . . . */
elf_flagehdr(elf, ELF_C_SET, ELF_F_DIRTY);
REFERENCES
elf(3E), elf_end(3E), elf_getdata(3E), elf_getehdr(3E),
elf_update(3E)
Copyright 1994 Novell, Inc. Page 2