labelit(1M) labelit(1M)
NAME
labelit (generic) - provide labels for file systems
SYNOPSIS
labelit [-F FSType] [-V] [current_options] [-o specific_options] special [operands]
DESCRIPTION
labelit can be used to provide labels for unmounted disk file
systems or file systems being copied to tape.
The special name should be the disk partition (for example,
/dev/rdsk/*, where the value of * is machine specific), or the
cartridge tape (for example, /dev/rmt/*). The device may not
be on a remote machine. operands are FSType-specific and the
manual page of the FSType-specific labelit command should be
consulted for a detailed description.
current_options are options supported by the s5-specific
module of labelit. Other FSTypes do not necessarily support
these options. specific_options indicate suboptions specified
in a comma-separated list of suboptions and/or keyword-
attribute pairs for interpretation by the FSType-specific
module of the command.
The options are:
-F specify the FSType on which to operate. The FSType
should either be specified here or be determinable
from /etc/vfstab by matching special with an entry
in the table.
-V echo complete command line. This option is used to
verify and validate the command line. Additional
information obtained via a /etc/vfstab lookup is
included in the output. The command is not executed.
-o Specify FSType-specific options.
NOTICES
This command may not be supported for all FSTypes.
FILES
/etc/vfstab list of default parameters for each file system
Copyright 1994 Novell, Inc. Page 1
labelit(1M) labelit(1M)
REFERENCES
s5-specific labelit(1M_S5), sfs-specific labelit(1M_SFS),
ufs-specific labelit(1M_UFS), vxfs-specific labelit(1M_VXFS),
vfstab(4)
Copyright 1994 Novell, Inc. Page 2