sed(1) sed(1)
NAME
sed - stream editor
SYNOPSIS
sed [-n] [-e script] [-f sfile] [file . . .]
DESCRIPTION
sed copies the named file (standard input default) to the
standard output, edited according to a script of commands.
The -f option causes the script to be taken from file sfile;
these options accumulate. If there is just one -e option and
no -f options, the flag -e may be omitted. The -n option
suppresses the default output.
sed processes supplementary code set characters, and
recognizes supplementary code set characters in script file
comments (see below) according to the locale specified in the
LC_CTYPE environment variable [see LANG on environ(5)], except
as noted under the y command below. In regular expressions,
pattern searches are performed on characters, not bytes, as
described on ed(1).
A script consists of editing commands, one per line, of the
following form:
[address [, address]] function [arguments]
In normal operation, sed cyclically copies a line of input
into a pattern space (unless there is something left after a D
command), applies in sequence all commands whose addresses
select that pattern space, and at the end of the script copies
the pattern space to the standard output (except under -n) and
deletes the pattern space.
Some of the commands use a hold space to save all or part of
the pattern space for subsequent retrieval.
An address is either a decimal number that counts input lines
cumulatively across files, a $ that addresses the last line of
input, or a context address, that is, a /regular expression/
in the style of ed(1) modified thus:
In a context address, the construction \?regular
expression?, where ? is any character, is identical to
/regular expression/. Note that in the context address
\xabc\xdefx, the second x stands for itself, so that the
Copyright 1994 Novell, Inc. Page 1
sed(1) sed(1)
regular expression is abcxdef.
The escape sequence \n matches a new-line embedded in
the pattern space.
A period (.) matches any character except the terminal
new-line of the pattern space.
A command line with no addresses selects every pattern
space.
A command line with one address selects each pattern
space that matches the address.
A command line with two addresses selects the inclusive
range from the first pattern space that matches the
first address through the next pattern space that
matches the second address. (If the second address is a
number less than or equal to the line number selected by
the first address, only the line corresponding to the
first address is selected.) Thereafter the process is
repeated, looking again for the first address.
Editing commands can be applied only to non-selected pattern
spaces by use of the negation function ! (below).
In the following list of functions the maximum number of
permissible addresses for each function is indicated in
parentheses.
The text argument consists of one or more lines, all but the
last of which end with \ to hide the new-line. Backslashes in
text are treated like backslashes in the replacement string of
an s command. The rfile or wfile argument must terminate the
command line and must be preceded by exactly one blank. Each
wfile is created before processing begins. There can be at
most 10 distinct wfile arguments.
(1)a\
text Append. Place text on the output before reading the
next input line.
(2)b label
Branch to the : command bearing the label. If label
is empty, branch to the end of the script.
Copyright 1994 Novell, Inc. Page 2
sed(1) sed(1)
(2)c\
text Change. Delete the pattern space. Place text on
the output. Start the next cycle.
(2)d Delete the pattern space. Start the next cycle.
(2)D Delete the initial segment of the pattern space
through the first new-line. Start the next cycle.
(2)g Replace the contents of the pattern space by the
contents of the hold space.
(2)G Append the contents of the hold space to the pattern
space.
(2)h Replace the contents of the hold space by the
contents of the pattern space.
(2)H Append the contents of the pattern space to the hold
space.
(1)i\
text Insert. Place text on the standard output.
(2)l List the pattern space on the standard output in an
unambiguous form. Non-printable characters are
displayed in octal notation and long lines are
folded.
(2)n Copy the pattern space to the standard output.
Replace the pattern space with the next line of
input.
(2)N Append the next line of input to the pattern space
with an embedded new-line. (The current line number
changes.)
(2)p Print. Copy the pattern space to the standard
output.
(2)P Copy the initial segment of the pattern space
through the first new-line to the standard output.
(1)q Quit. Branch to the end of the script. Do not
start a new cycle.
Copyright 1994 Novell, Inc. Page 3
sed(1) sed(1)
(2)r rfile
Read the contents of rfile. Place them on the
output before reading the next input line.
(2)s/regular expression/replacement/flags
Substitute the replacement string for instances of
the regular expression in the pattern space. Any
character may be used instead of /. For a fuller
description see ed(1). flags is zero or more of:
n n= 1 - 512. Substitute for just the nth
occurrence of the regular expression.
g Global. Substitute for all nonoverlapping
instances of the regular expression rather
than just the first one.
p Print the pattern space if a replacement was
made.
w wfile Write. Append the pattern space to wfile if
a replacement was made.
(2)t label
Test. Branch to the : command bearing the label if
any substitutions have been made since the most
recent reading of an input line or execution of a t.
If label is empty, branch to the end of the script.
(2)w wfile
Write. Append the pattern space to wfile. The
first occurrence of w will cause wfile to be
cleared. Subsequent invocations of w will append.
Each time the sed command is used, wfile is
overwritten.
(2)x Exchange the contents of the pattern and hold
spaces.
(2)y/string1/string2/
Transform. Replace all occurrences of characters in
string1 with the corresponding characters in
string2. string1 and string2 must have the same
number of characters. The result is not guaranteed
when supplementary code set characters are specified
in the strings.
Copyright 1994 Novell, Inc. Page 4
sed(1) sed(1)
(2)! function
Don't. Apply the function (or group, if function is
{) only to lines not selected by the address(es).
(0): label
This command does nothing; it bears a label for b
and t commands to branch to.
(1)= Place the current line number on the standard output
as a line.
(2){ Execute the following commands through a matching }
only when the pattern space is selected.
(0) An empty command is ignored.
(0)# If a # appears as the first character on a line of a
script file, then that entire line is treated as a
comment, with one exception: if a # appears on the
first line and the character after the # is an n,
then the default output will be suppressed. The
rest of the line after #n is also ignored. A script
file must contain at least one non-comment line.
Comments may contain supplementary code set
characters.
FILES
/usr/lib/locale/locale/LC_MESSAGES/uxcore.abi
language-specific message file [See LANG on environ
(5).]
REFERENCES
awk(1), ed(1), grep(1)
Copyright 1994 Novell, Inc. Page 5