UUSEND(1C)              GENIX Programmer's Manual              UUSEND(1C)



      NAME
           uusend - send a file to a remote host

      SYNOPSIS
           uusend [ -m mode ] sourcefile sys1!sys2!..!remotefile

      DESCRIPTION
           Uusend sends a file to a given location on  a  remote  system.   The
           system  need  not  be  directly connected to the local system, but a
           chain of uucp(1) links needs to connect the two systems.

           If the -m option is specified, the mode of the file  on  the  remote
           end  will be taken from the octal number given.  Otherwise, the mode
           of the input file will be used.

           The sourcefile can be ``-'', meaning  to  use  the  standard  input.
           Both  of  these  options  are primarily intended for internal use of
           uusend.

           The remotefile can include the ~userid syntax.

      DIAGNOSTICS
           If anything goes wrong any further away than the first  system  down
           the line, you will never hear about it.

      SEE ALSO
           uux(1), uucp(1), uuencode(1)

      AUTHOR
           Mark Horton

      BUGS
           This command shouldn't exist, since uucp should handle it.

           All systems along the line must have the  uusend  command  available
           and allow remote execution of it.

           Some uucp systems have a bug where binary files cannot be the  input
           to  a uux command.  If this bug exists in any system along the line,
           the file will show up severly munged.















      Printed 11/16/83                                                        1