labelit(1M) — ADMINISTRATOR COMMANDS
NAME
labelit (generic) − provide labels for file systems
SYNOPSIS
labelit [−F FSType] [−V] [current_options] [−o specific_options] special [operands]
DESCRIPTION
labelit can be used to provide labels for unmounted disk file systems or file systems being copied to tape.
The special name should be the disk slice (e.g., /dev/rdsk/m328_c0d2s7), or the cartridge tape (e.g., /dev/rmt/ctape1). The device may not be on a remote machine. operands are FSType-specific, and labelit_FSType(1M) should be consulted for a detailed description.
current_options are options supported by the s5-specific module of labelit. Other FSTypes do not necessarily support these options. specific_options indicate suboptions specified in a comma-separated list of suboptions and/or keyword-attribute pairs for interpretation by the FSType-specific module of the command. See labelit_FSType(1M) for details.
The options are:
−F specify the FSType on which to operate. The FSType should either be specified here or be determinable from /etc/vfstab by matching the special with an entry in the table.
−V echo complete command line. This option is used to verify and validate the command line. Additional information obtained via a /etc/vfstab lookup is included in the output. The command is not executed.
−o Specify FSType-specific options.
NOTE
This command may not be supported for all FSTypes. For some FSTypes, the raw device name must be specified, not the block device name or the mount point name.
FILES
/etc/vfstab list of default parameters for each file system