HPSREMRES(1) — USER COMMANDS
NAME
hpsremres − Reset MVME338 cluster controller
SYNOPSIS
hpsremres −a addr [ −d device ]
DESCRIPTION
Hpsremres sends a remote reset command through the MVME338 host adapter Diagnostic Application to reset a given MVME338 cluster controller.
The −a addr parameter selects which cluster controller address to issue the reset to. This parameter must be present and in the valid range (01 to FF hex).
OPTIONS
The following option may be selected:
−dSet device file name. Allows the user to override the default MVME338 device name. If this option is selected, the overriding device name must be specified in the device parameter on the command line.
EXAMPLES
To reset cluster controller 7:
hpsremres -a 7
To reset cluster controller 1 on the second host adapter in the system:
hpsremres -a 1 -d /dev/xedt/mvme338_c1