NAME

 E1446 − SCPI Commands Quick Reference
 

DESCRIPTION

 
The following is a SCPI command quick reference for the HP E1446.  This quick reference provides:
 
 
Command Descriptions
 
Commands Not Supported
 
Commands Changed
 
Query Command Response Types
 
Overlapping Commands
 
ONSRQ Restrictions
 
The SCPI commands are to be embedded in HP Compiled SCPI commands.  For information on HP Compiled SCPI, see the HP Compiled SCPI commands in manual pages, or see the HP Compiled SCPI learning products.
 
For additional information on SCPI commands, see the VXI User’s Guide for the instrument.
 

COMMAND DESCRIPTIONS

Common Commands

*IDN?  Returns the identification string of the instrument. 
 

*RST Resets the instrument to a known state. 
 

*TST?  Self-Test, returns 0 if passes. 
 

*OPC Sets the request for OPC flag when all pending operations have completed. 
 

*OPC?  Query operation complete. Returns 1 when all pending operations have completed. 
 

*WAI Wait for complete. 
 

*CLS Clears all status registers. 
 

*ESE Enable status register bits. 
 

*ESE?  Query event status enable. 
 

*ESR?  Query and clear the event status register. 
 

*SRE Sets the service request enable register bits and corresponding serial poll status register bits to generate a service request. 
 

*SRE?  Query service request enable. 
 

*STB?  Query read status byte. 
 

*TRG Bus Trigger. 
 

*RCL Recall instrument state. 
 

*SAV Store instrument state. 
 

SCPI Commands with E1405 Command Module

 
INPut[1]:ATTenuation <attenuation>
 
INPut[1]:IMPedance <impedance>
 
INPut2:ATTenuation <attenuation>
 
INPut2:IMPedance <impedance>
 
OUTPut1:ATTenuation <attenuation>
 
OUTPut1:IMPedance <impedance>
 
OUTPut1:OVERload?
 
OUTPut1[:STATe] <mode>
 
OUTPut1[:STATe]:ACTual?
 
OUTPut2:IMPedance <impedance>
 
OUTPut3:IMPedance <impedance>
 
SOURce:VOLTage[:LEVel][:IMMediate]:OFFSet <voltage>
 
STATus:OPERation | QUEStionable:CONDition?
 
STATus:OPERation | QUEStionable:ENABle <unmask>
 
STATus:OPERation | QUEStionable[:EVENt]?
 
STATus:OPERation | QUEStionable:NTRansition <unmask>
 
STATus:OPERation | QUEStionable:PTRansition <unmask>
 
STATus:PRESet
 
SYSTem:ERRor?
 
SYSTem:VERsion?
 

SCPI Commands with E1445A Arb.

 
INPut[1]:ATTenuation <attenuation>
 
INPut[1]:IMPedance <impedance>
 
INPut2:ATTenuation <attenuation>
 
INPUT2:IMPedance <impedance>
 
OUTPut2:ATTenuation <attenuation>
 
OUTPut2:IMPedance <impedance>
 
OUTPut2:OVERload?
 
OUTPut2[:STATe] <mode>
 
OUTPut2[:STATe]:ACTual?
 
OUTPut3:IMPedance <impedance>
 
OUTPut4:IMPedance <impedance>
 
SOURce2:VOLTage[:LEVel][:IMMediate]:OFFSet <voltage>
 
STATus:OPERation | QUEStionable:CONDition?
 
STATus:OPERation | QUEStionable:ENABle <unmask>
 
STATus:OPERation | QUEStionable [:EVENt]?
 
STATus:OPERation | QUEStionable:NTRansition <unmask>
 
STATus:OPERation | QUEStionable:PTRansition <unmask>
 
STATus:PRESet
 
SYSTem:ERRor?
 
SYSTem:VERsion?
 

COMMANDS NOT SUPPORTED

 
C-SCPI does not support the commands listed.  However, these commands are still supported in the Command Module version.
 
Macro commands not supported:  *DMC, *GMC, *PMC, *LMC, *EMC, *RMC, and MEM:DEL:MACR
 
Monitor commands not supported:  DISP:MON, DISP:MON:CHAN, and DISP:MON:STR
 

QUERY COMMAND RESPONSE TYPES

 
All other query commands return an integer.
 

SYST:ERR? int, quoted string
 

SYST:VER? string
 

*IDN?   string
 

INPUT:ATTENUATION?  double
 

INPUT:IMPEDANCE?  double
 

OUTPUT:ATTENUATION? 
double
 

OUTPUT:IMPEDANCE?  double
 

VOLT:OFFSET? double
 

OVERLAPPING COMMANDS

ONSRQ RESTRICTIONS

 
NONE
 

  —  December 04, 1992