HP-UX

NAME

/usr/pil/etc/vxi[lu]/irq.cf − This is one of several configuration files used by the ivxirm program. 

DESCRIPTION

Irq.cf

This database contains the mapping of VXI devices to Interrupt lines.  Note that not all VXI devices need to use interrupt lines and that not all interrupt lines need be assigned.  However, no interrupt line that is allocated in this file can be allocated in the ’vmedev.cf’ file. 

The format of this files is as follows:

line    handler    interruptors ... 

All fields are <tab> or <space> seperated.  All values can be expressed in decimal or hex.  The ’line’ field is the interrupt line being allocated.  There can be at most one line for each interrupt line.  The handler field is the logical address of the interrupt handler for this line (note that only one handler can be assigned for any given line).  The interruptors field is a list of logical addresses of interrupters that can use this interrupt line. 

SEE ALSO

ivxirm(1m)

AUTHOR

irq.cf was developed by HP. 
 

Hewlett-Packard Company  —  September 29, 1999