HP-UX

NAME

siclconf − SICL kernel configuration program. 

SYNOPSIS

siclconf [-cdkbvze] [arg...]

DESCRIPTION

Siclconf, may only be run by the super-user on HP-UX 10.  It performs a variety of operations needed to build a kernel which includes SICL device drivers.  These include the archiving of object modules into the kernel libraries in /etc/conf, running the eisa_config utility, and the building and installation of the new kernel.  Siclconf, uses the configuration file, /etc/opt/sicl/hwconfig.cf to determine the number and type of supported interfaces available to the system, as well as certain operating parameters for the interface. 

The parameter definitions follow. 

c <hwconf>
The hwconf parameter contains the name of the hardware configuration file. The default is: /etc/opt/sicl/hwconfig.cf. 

k <kernel>
The kernel parameter contains the name of the kernel to install. The default is: /stand/vmunix. 

b <backup>
The backup parameter contains the name of the file in which to store the current kernel. The default is: /stand/vmunix.prev. 

v Print a verbose output of the program’s actions. 

z Enter non-interactive mode (assume default answers");

e Run eisa_config only.  This option is to be avoided unless the users is instructed to use it by a previous run of this program. 
 

SEE ALSO

hwconfig.cf(1m)

AUTHOR

siclconf was developed by HP. 

Hewlett-Packard Company  —  September 29, 1999