ITRIGINVERT(1)

HP-UX

NAME

itriginvert − Configuration utility to change the polarity of external trigger lines

SYNOPSIS

itriginvert -a <interface_name> -i [ON|OFF] -o [ON|OFF] [-v] [-x] [-?]

DESCRIPTION

This is a configuration utility to be used with the V743 VXI Controller. This utility allows you to change the polarity of the V743 Trig In and Trig Out lines. The external trigger lines will remain inverted until power is cycled or the resource manager runs. The external trigger lines will then return to the same state as the trigger line routed to them. The default state is inverted.

The parameter definitions follow.

a <interface_name>
Specifies the interface, such as vxi.

i Sets the state of Trig In, ON inverts the polarity.

o Sets the state of Trig Out, ON inverts the polarity.

v Turns on verbose mode.

x Tells the program not to print warnings.

? Prints the usage of the itriginvert program.

EXAMPLE

itriginvert -a vxi -i ON -o OFF

AUTHOR

itrginvrt was developed by HP