man(5)
NAME
man − macros for formatting entries in this manual
DESCRIPTION
These nroff and troff macros are used to lay out the format of the entries of this manual. These macros are used by the man(1) command.
The default page size is 8.5×11, with a 6.5×10 text area; the −rs1 option reduces these dimensions to 6×9 and 4.75×8.375, respectively. This option (which is not effective in nroff) also reduces the default type size from 10-point to 9-point, and the vertical line spacing from 12-point to 10-point. The −rV2 option may be used to set certain parameters to values appropriate for certain Versatec printers: it sets the line length to 82 characters, the page length to 84 lines, and it inhibits underlining. This option should not be confused with the −Tvp option of the man(1) command, which is available on some UNIX operating systems.
Any text argument below may be one to six “words”. Double quotes ("") may be used to include blanks in a “word”. If text is empty, the special treatment is applied to the next line that contains text to be printed. For example, .I may be used to italicize a whole line, or .SM followed by .B to make small bold text. By default, hyphenation is turned off for nroff, but remains on for troff.
Type font and size are reset to default values before each paragraph and after processing font- and size-setting macros, e.g., .I, .RB, .SM. Tab stops are neither used nor set by any macro except .DT and .TH. .TH invokes .DT (see below).
Default units for indents in are ens. When in is omitted, the previous indent is used. This remembered indent is set to its default value (7.2 ens in troff, 5 ens in nroff−this corresponds to 0.5 inch in the default page size) by .TH, .P, and .RS, and restored by .RE.
.TH t s c n Set the title and entry heading; t is the title and s is the section number. t is combined with s in parentheses to form the top left- and right-hand corners of the page heading. c is extra commentary, e.g., “Optional Software Required”, and is placed in parentheses at the center of the second line in the two-line page heading space. n (for “new manual name”) is used for other text such as "Series 300/400 Only", and is centered between the title and section on the first page heading line.
.SH text Place section head text, e.g., SYNOPSIS, here.
.SS text Place sub-section head text, e.g., Options, here.
.B text Make text bold.
.I text Make text italic.
.SM text Make text 1 point smaller than default point size.
.RI a b Concatenate roman a with italic b, and alternate these two fonts for up to six arguments. Similar macros alternate between any two of roman, italic, and bold:
.IR .RB .BR .IB .BI
.P Begin a paragraph with normal font, point size, and indent. .PP is a synonym for .P.
.HP in Begin paragraph with hanging indent.
.TP in Begin indented paragraph with hanging tag. The next line that contains text to be printed is taken as the tag. If the tag does not fit, it is printed on a separate line.
.IP t in Same as .TP in with tag t; often used to get an indented paragraph without a tag.
.RS in Increase relative indent (initially zero). Indent all output an extra in units from the current left margin.
.RE k Return to the kth relative indent level (initially, k=1; k=0 is equivalent to k=1); if k is omitted, return to the most recent lower indent level.
.PM m Produces proprietary markings; where m may be P for PRIVATE, or N for NOTICE, BP for BELL LABORATORIES PROPRIETARY, or BR for BELL LABORATORIES RESTRICTED.
.DT Restore default tab settings (every 7.2 ens in troff, 5 ens in nroff).
.PD v Set the interparagraph distance to v vertical spaces. If v is omitted, set the interparagraph distance to the default value (0.4v in troff, 1v in nroff).
The following strings are defined:
\∗R (Reg.) in nroff, Registered Trademark symbol in troff, if available.
\∗S Change to default type size.
\∗(Tm Trademark indicator.
The following number registers are given default values by .TH:
IN Left margin indent relative to section heads (default is 7.2 ens in troff, 5 ens in nroff).
LL Line length including IN.
PD Current interparagraph distance.
Special Features
Starting at HP-UX Release 7.0, the definition of one of the strings used in the page footer macro was moved to the .TH macro and redefined to a non-printing string to prevent the printing of "Hewlett-Packard Company" at the bottom of manual entries that might come from other sources.
This change also enables users and third-party software suppliers to directly control the contents of the left- and right-hand fields of the footer line for use in displaying company name, release version, etc., as desired when creating their own manual entries. Footer string )H is printed on the left; string ]W is printed on the right, and the page number is printed in the center. Strings can be defined anywhere after the .TH macro call but before end of first page as in the following example source file segment:
.TH MAN 5
.ds )H XYZ Company
.ds ]W Release 2.3: July 1989
which produces a footer resembling:
XYZ Company- 1 -Release 2.3: July 1989
CAVEATS
In addition to the macros, strings, and number registers mentioned above, a number of internal macros, strings, and number registers are defined. Except for names predefined by nroff/troff and number registers d, m, and y, all such internal names are of the form XA, where X is one of ), ], and }, and A stands for any alphanumeric character.
The NAME section of each entry is assumed to consist of a single line of input that has the following format:
name[, name, name ...] \− explanatory text
The NAME section is no longer used to prepare the Table of Contents and Index for this manual. Instead, that information is coded as comments at the end of each manual entry source file where it can be accessed by various tools and programs as desired. However, catman(1M) and related programs still use the NAME line to create the mkwhatis database.
The macro package increases the inter-word spaces (to eliminate ambiguity) in the SYNOPSIS section of each entry.
The macro package itself uses only the roman font (so that one can replace, for example, the bold font by the constant-width font if available). Of course, if the input text of an entry contains requests for other fonts (e.g., .I, .RB, \fI), the corresponding fonts must be mounted.
FILES
/usr/lib/macros/cmp.[nt].[dt].an
/usr/lib/tmac/tmac.an
/usr/lib/macros/ucmp.[nt].an
SEE ALSO
WARNINGS
If any argument to .TH contains any blanks and is not enclosed by double quotes (""), the output might be incorrectly formatted.
Hewlett-Packard Company — HP-UX Release 8.05: June 1991