term_c(4)

NAME

term.h − terminal capabilities

DESCRIPTION

The header <term.h> contains definitions for each of the following symbolic constants and capability names in the following tables.

In the following table, a Variable is the name by which a C programmer accesses a capability (at the terminfo level). A Capname is the short name for a capability specified in the terminfo source file. It is used by a person updating the source file and by the tput command.

Booleans

	Cap-	Termcap
Variable	name	Code	Description
auto_left_margin	bw	bw	cub1 wraps from column 0 to last column
auto_right_margin	am	am	Terminal has automatic margins
back_color_erase	bce	ut	Screen erased with background color
buttons	btns	BT	Number of buttons on the mouse
can_change	ccc	cc	Terminal can re-define existing color
ceol_standout_glitch	xhp	xs	Standout not erased by overwriting (hp)
col_addr_glitch	xhpa	YA	Only positive motion for hpa/mhpa caps
cpi_changes_res	cpix	YF	Changing character pitch changes resolution
create_window	cwin	CW	Define win #1 to go from #2,#3 to #4,#5
cr_cancels_micro_mode	crxm	YB	Using cr turns off micro mode
dest_tabs_magic_smso	xt	xt	Destructive tabs, magic smso char (t1061)
dial_phone	dial	DI	Dial phone number #1
display_clock	dclk	DK	Display time-of-day clock
eat_newline_glitch	xenl	xn	Newline ignored after 80 columns (Concept)
erase_overstrike	eo	eo	Can erase overstrikes with a blank
fixed_pause	pause	PA	Pause for 2-3 seconds
flash_hook	hook	fh	Flash the switch hook
generic_type	gn	gn	Generic line type (e.g., dialup, switch)
get_mouse	getm	Gm	Curses should get button events
goto_window	wingo	WG	Got to window #1
hangup	hup	HU	Hang-up phone
hard_copy	hc	hc	Hardcopy terminal
hard_cursor	chts	HC	Cursor is hard to see
has_meta_key	km	km	Has a meta key (shift, sets parity bit)
has_print_wheel	daisy	YC	Printer needs operator to change character set
has_status_line	hs	hs	Has extra "status line"
hue_lightness_saturation	hls	hl	Terminal uses only HLS color notation (Tektronix)
insert_null_glitch	in	in	Insert mode distinguishes nulls
lpi_changes_res	lpix	YG	Changing line pitch changes resolution
memory_above	da	da	Display may be retained above the screen
memory_below	db	db	Display may be retained below the screen
move_insert_mode	mir	mi	Safe to move while in insert mode
move_standout_mode	msgr	ms	Safe to move in standout modes
needs_xon_xoff	nxon	nx	Padding won’t work, xon/xoff required
no_esc_ctlc	xsb	xb	Beehive (f1=escape, f2=ctrl C)
no_pad_char	npc	NP	Pad character doesn’t exist
non_dest_scroll_region	ndscr	ND	Scrolling region is nondestructive
non_rev_rmcup	nrrmc	NR	smcup does not reverse rmcup
over_strike	os	os	Terminal overstrikes on hard-copy terminal
print_rate	cps	Ym	Print rate in characters per second
prtr_silent	mc5i	5i	Printer won’t echo on screen
row_addr_glitch	xvpa	YD	Only positive motion for vpa/mvpa caps
semi_auto_right_margin	sam	YE	Printing in last column causes cr
set_pglen_inch	slength	YI	Set page length to #1 hundredth of an inch (use tparm)
status_line_esc_ok	eslok	es	Escape can be used on the status line
tilde_glitch	hz	hz	Hazeltine; can’t print tilde (~)
transparent_underline	ul	ul	Underline character overstrikes
xon_xoff	xon	xo	Terminal uses xon/xoff handshaking

Numbers

	Cap-	Termcap
Variable	name	Code	Description
bit_image_entwining	bitwin	Yo	Number of passes for each bit-map row
bit_image_type	bitype	Yp	Type of bit image device
buffer_capacity	bufsz	Ya	Number of bytes buffered before printing
columns	cols	co	Number of columns in a line
dot_horz_spacing	spinh	Yc	Spacing of dots horizontally in dots per inch
dot_vert_spacing	spinv	Yb	Spacing of pins vertically in pins per inch
init_tabs	it	it	Tabs initially every # spaces
label_height	lh	lh	Number of rows in each label
label_width	lw	lw	Number of columns in each label
lines	lines	li	Number of lines on a screen or a page
lines_of_memory	lm	lm	Lines of memory if > lines; 0 means varies
max_attributes	ma	ma	Maximum combined video attributes terminal can display
magic_cookie_glitch	xmc	sg	Number of blank chars left by smso or rmso
max_colors	colors	Co	Maximum number of colors on the screen
max_micro_address	maddr	Yd	Maximum value in micro_..._address
max_micro_jump	mjump	Ye	Maximum value in parm_..._micro
max_pairs	pairs	pa	Maximum number of color-pairs on the screen
maximum_windows	Wnum	MW	Maximum number of definable windows
micro_char_size	mcs	Yg	Character step size when in micro mode
micro_line_size	mls	Yf	Line step size when in micro mode
no_color_video	ncv	NC	Video attributes that can’t be used with colors
num_labels	nlab	Nl	Number of labels on screen (start at 1)
number_of_pins	npins	Yh	Number of pins in print-head
output_res_char	orc	Yi	Horizontal resolution in units per character
output_res_line	orl	Yj	Vertical resolution in units per line
output_res_horz_inch	orhi	Yk	Horizontal resolution in units per inch
output_res_vert_inch	orvi	Yl	Vertical resolution in units per inch
padding_baud_rate	pb	pb	Lowest baud rate where padding needed
virtual_terminal	vt	vt	Virtual terminal number
wide_char_size	widcs	Yn	Character step size when in double wide mode
width_status_line	wsl	ws	Number of columns in status line

Strings

	Cap-	Termcap
Variable	name	Code	Description
acs_chars	acsc	ac	Graphic charset pairs aAbBcC
alt_scancode_esc	scesa	S8	Alternate escape for scancode emulation (default is for vt100)
back_tab	cbt	bt	Back tab
bell	bel	bl	Audible signal (bell)
bit_image_carriage_return	bicr	Yv	Move to beginning of same row (use tparm)
bit_image_newline	binel	Zz	Move to next row of the bit image (use tparm)
bit_image_repeat	birep	Xy	Repeat bit-image cell #1 #2 times (use tparm)
carriage_return	cr	cr	Carriage return
change_char_pitch	cpi	ZA	Change number of characters per inch
change_line_pitch	lpi	ZB	Change number of lines per inch
change_res_horz	chr	ZC	Change horizontal resolution
change_res_vert	cvr	ZD	Change vertical resolution
change_scroll_region	csr	cs	Change to lines #1 through #2 (vt100)
char_padding	rmp	rP	Like ip but when in replace mode
char_set_names	csnm	Zy	List of character set names
clear_all_tabs	tbc	ct	Clear all tab stops
clear_margins	mgc	MC	Clear all margins (top, bottom, and sides)
clear_screen	clear	cl	Clear screen and home cursor
clr_bol	el1	cb	Clear to beginning of line, inclusive
clr_eol	el	ce	Clear to end of line
clr_eos	ed	cd	Clear to end of display
code_set_init	csin	ci	Init sequence for multiple codesets
color_names	colornm	Yw	Give name for color #1
column_address	hpa	ch	Horizontal position absolute
command_character	cmdch	CC	Terminal settable cmd character in prototype
cursor_address	cup	cm	Move to row #1 col #2
cursor_down	cud1	do	Down one line
cursor_home	home	ho	Home cursor (if no cup)
cursor_invisible	civis	vi	Make cursor invisible
cursor_left	cub1	le	Move left one space.
cursor_mem_address	mrcup	CM	Memory relative cursor addressing
cursor_normal	cnorm	ve	Make cursor appear normal (undo vs/vi)
cursor_right	cuf1	nd	Non-destructive space (cursor or carriage right)
cursor_to_ll	ll	ll	Last line, first column (if no cup)
cursor_up	cuu1	up	Upline (cursor up)
cursor_visible	cvvis	vs	Make cursor very visible
define_bit_image_region	defbi	Yx	Define rectangular bit-image region (use tparm)
define_char	defc	ZE	Define a character in a character set†
delete_character	dch1	dc	Delete character
delete_line	dl1	dl	Delete line
device_type	devt	dv	Indicate language/codeset support
dis_status_line	dsl	ds	Disable status line
display_pc_char	dispc	S1	Display PC character
down_half_line	hd	hd	Half-line down (forward 1/2 linefeed)
ena_acs	enacs	eA	Enable alternate character set
end_bit_image_region	endbi	Yy	End a bit-image region (use tparm)
enter_alt_charset_mode	smacs	as	Start alternate character set
enter_am_mode	smam	SA	Turn on automatic margins
enter_blink_mode	blink	mb	Turn on blinking
enter_bold_mode	bold	md	Turn on bold (extra bright) mode
enter_ca_mode	smcup	ti	String to begin programs that use cup
enter_delete_mode	smdc	dm	Delete mode (enter)
enter_dim_mode	dim	mh	Turn on half-bright mode
enter_doublewide_mode	swidm	ZF	Enable double wide printing
enter_draft_quality	sdrfq	ZG	Set draft quality print
enter_horizontal_hl_mode	ehhlm	n/a	turn on horizontal highlight mode
enter_insert_mode	smir	im	Insert mode (enter)
enter_italics_mode	sitm	ZH	Enable italics
enter_left_hl_mode	elhlm	n/a	Turn on left highlight mode
enter_leftward_mode	slm	ZI	Enable leftward carriage motion
enter_low_hl_mode	elohlm	n/a	turn on low highlight mode
enter_micro_mode	smicm	ZJ	Enable micro motion capabilities
enter_near_letter_quality	snlq	ZK	Set near-letter quality print
enter_normal_quality	snrmq	ZL	Set normal quality print
enter_pc_charset_mode	smpch	S2	Enter PC character display mode
enter_protected_mode	prot	mp	Turn on protected mode
enter_reverse_mode	rev	mr	Turn on reverse video mode
enter_right_hl_mode	erhlm	n/a	turn on right highlight mode
enter_scancode_mode	smsc	S4	Enter PC scancode mode
enter_secure_mode	invis	mk	Turn on blank mode (characters invisible)
enter_shadow_mode	sshm	ZM	Enable shadow printing
enter_standout_mode	smso	so	Begin standout mode
enter_subscript_mode	ssubm	ZN	Enable subscript printing
enter_superscript_mode	ssupm	ZO	Enable superscript printing
enter_top_hl_mode	ethlm	n/a	Turn on top highlight mode
enter_underline_mode	smul	us	Start underscore mode
enter_upward_mode	sum	ZP	Enable upward carriage motion
enter_vertical_hl_mode	evhlm	n/a	turn on vertical highlight mode
enter_xon_mode	smxon	SX	Turn on xon/xoff handshaking
erase_chars	ech	ec	Erase #1 characters
exit_alt_charset_mode	rmacs	ae	End alternate character set
exit_am_mode	rmam	RA	Turn off automatic margins
exit_attribute_mode	sgr0	me	Turn off all attributes
exit_ca_mode	rmcup	te	String to end programs that use cup
exit_delete_mode	rmdc	ed	End delete mode
exit_doublewide_mode	rwidm	ZQ	Disable double wide printing
exit_insert_mode	rmir	ei	End insert mode
exit_italics_mode	ritm	ZR	Disable italics
exit_leftward_mode	rlm	ZS	Enable rightward (normal) carriage motion
exit_micro_mode	rmicm	ZT	Disable micro motion capabilities
exit_pc_charset_mode	rmpch	S3	Disable PC character display mode
exit_scancode_mode	rmsc	S5	Disable PC scancode mode
exit_shadow_mode	rshm	ZU	Disable shadow printing
exit_standout_mode	rmso	se	End standout mode
exit_subscript_mode	rsubm	ZV	Disable subscript printing
exit_superscript_mode	rsupm	ZW	Disable superscript printing
exit_underline_mode	rmul	ue	End underscore mode
exit_upward_mode	rum	ZX	Enable downward (normal) carriage motion
exit_xon_mode	rmxon	RX	Turn off xon/xoff handshaking
flash_screen	flash	vb	Visible bell (may not move cursor)
form_feed	ff	ff	Hardcopy terminal page eject
from_status_line	fsl	fs	Return from status line
init_1string	is1	i1	Terminal or printer initialization string
init_2string	is2	is	Terminal or printer initialization string
init_3string	is3	i3	Terminal or printer initialization string
init_file	if	if	Name of initialization file
init_prog	iprog	iP	Path name of program for initialization
initialize_color	initc	IC	Initialize the definition of color
initialize_pair	initp	Ip	Initialize color-pair
insert_character	ich1	ic	Insert character
insert_line	il1	al	Add new blank line
insert_padding	ip	ip	Insert pad after character inserted

The “key_” strings are sent by specific keys. The “key_” descriptions include the macro, defined in <curses.h>, for the code returned by the CURSES function getch() when the key is pressed [see curs_getch(3X)].

	Cap-	Termcap
Variable	name	Code	Description
key_a1	ka1	K1	upper left of keypad
key_a3	ka3	K3	upper right of keypad
key_b2	kb2	K2	center of keypad
key_backspace	kbs	kb	sent by backspace key
key_beg	kbeg	@1	sent by beg(inning) key
key_btab	kcbt	kB	sent by back-tab key
key_c1	kc1	K4	lower left of keypad
key_c3	kc3	K5	lower right of keypad
key_cancel	kcan	@2	sent by cancel key
key_catab	ktbc	ka	sent by clear-all-tabs key
key_clear	kclr	kC	sent by clear-screen or erase key
key_close	kclo	@3	sent by close key
key_command	kcmd	@4	sent by cmd (command) key
key_copy	kcpy	@5	sent by copy key
key_create	kcrt	@6	sent by create key
key_ctab	kctab	kt	sent by clear-tab key
key_dc	kdch1	kD	sent by delete-character key
key_dl	kdl1	kL	sent by delete-line key
key_down	kcud1	kd	sent by terminal down-arrow key
key_eic	krmir	kM	sent by rmir or smir in insert mode
key_end	kend	@7	sent by end key
key_enter	kent	@8	sent by enter/send key
key_eol	kel	kE	sent by clear-to-end-of-line key
key_eos	ked	kS	sent by clear-to-end-of-screen key
key_exit	kext	@9	sent by exit key
key_f0	kf0	k0	sent by function key f0
key_f1	kf1	k1	sent by function key f1
key_f2	kf2	k2	sent by function key f2
key_f3	kf3	k3	sent by function key f3
key_f4	kf4	k4	sent by function key f4
key_f5	kf5	k5	sent by function key f5
key_f6	kf6	k6	sent by function key f6
key_f7	kf7	k7	sent by function key f7
key_f8	kf8	k8	sent by function key f8
key_f9	kf9	k9	sent by function key f9
key_f10	kf10	k;	sent by function key f10
key_f11	kf11	F1	sent by function key f11
key_f12	kf12	F2	sent by function key f12
key_f13	kf13	F3	sent by function key f13
key_f14	kf14	F4	sent by function key f14
key_f15	kf15	F5	sent by function key f15
key_f16	kf16	F6	sent by function key f16
key_f17	kf17	F7	sent by function key f17
key_f18	kf18	F8	sent by function key f18
key_f19	kf19	F9	sent by function key f19
key_f20	kf20	FA	sent by function key f20
key_f21	kf21	FB	sent by function key f21
key_f22	kf22	FC	sent by function key f22
key_f23	kf23	FD	sent by function key f23
key_f24	kf24	FE	sent by function key f24
key_f25	kf25	FF	sent by function key f25
key_f26	kf26	FG	sent by function key f26
key_f27	kf27	FH	sent by function key f27
key_f28	kf28	FI	sent by function key f28
key_f29	kf29	FJ	sent by function key f29
key_f30	kf30	FK	sent by function key f30
key_f31	kf31	FL	sent by function key f31
key_f32	kf32	FM	sent by function key f32
key_f33	kf33	FN	sent by function key f33
key_f34	kf34	FO	sent by function key f34
key_f35	kf35	FP	sent by function key f35
key_f36	kf36	FQ	sent by function key f36
key_f37	kf37	FR	sent by function key f37
key_f38	kf38	FS	sent by function key f38
key_f39	kf39	FT	sent by function key f39
key_f40	kf40	FU	sent by function key f40
key_f41	kf41	FV	sent by function key f41
key_f42	kf42	FW	sent by function key f42
key_f43	kf43	FX	sent by function key f43
key_f44	kf44	FY	sent by function key f44
key_f45	kf45	FZ	sent by function key f45
key_f46	kf46	Fa	sent by function key f46
key_f47	kf47	Fb	sent by function key f47
key_f48	kf48	Fc	sent by function key f48
key_f49	kf49	Fd	sent by function key f49
key_f50	kf50	Fe	sent by function key f50
key_f51	kf51	Ff	sent by function key f51
key_f52	kf52	Fg	sent by function key f52
key_f53	kf53	Fh	sent by function key f53
key_f54	kf54	Fi	sent by function key f54
key_f55	kf55	Fj	sent by function key f55
key_f56	kf56	Fk	sent by function key f56
key_f57	kf57	Fl	sent by function key f57
key_f58	kf58	Fm	sent by function key f58
key_f59	kf59	Fn	sent by function key f59
key_f60	kf60	Fo	sent by function key f60
key_f61	kf61	Fp	sent by function key f61
key_f62	kf62	Fq	sent by function key f62
key_f63	kf63	Fr	sent by function key f63
key_find	kfnd	@0	sent by find key
key_help	khlp	%1	sent by help key
key_home	khome	kh	sent by home key
key_ic	kich1	kI	sent by ins-char/enter ins-mode key
key_il	kil1	kA	sent by insert-line key
key_left	kcub1	kl	sent by terminal left-arrow key
key_ll	kll	kH	sent by home-down key
key_mark	kmrk	%2	sent by mark key
key_message	kmsg	%3	sent by message key
key_mouse	kmous	Km	0631, Mouse event has occurred
key_move	kmov	%4	sent by move key
key_next	knxt	%5	sent by next-object key
key_npage	knp	kN	sent by next-page key
key_open	kopn	%6	sent by open key
key_options	kopt	%7	sent by options key
key_ppage	kpp	kP	sent by previous-page key
key_previous	kprv	%8	sent by previous-object key
key_print	kprt	%9	sent by print or copy key
key_redo	krdo	%0	sent by redo key
key_reference	kref	&1	sent by ref(erence) key
key_refresh	krfr	&2	sent by refresh key
key_replace	krpl	&3	sent by replace key
key_restart	krst	&4	sent by restart key
key_resume	kres	&5	sent by resume key
key_right	kcuf1	kr	sent by terminal right-arrow key
key_save	ksav	&6	sent by save key
key_sbeg	kBEG	&9	sent by shifted beginning key
key_scancel	kCAN	&0	sent by shifted cancel key
key_scommand	kCMD	∗1	sent by shifted command key
key_scopy	kCPY	∗2	sent by shifted copy key
key_screate	kCRT	∗3	sent by shifted create key
key_sdc	kDC	∗4	sent by shifted delete-char key
key_sdl	kDL	∗5	sent by shifted delete-line key
key_select	kslt	∗6	sent by select key
key_send	kEND	∗7	sent by shifted end key
key_seol	kEOL	∗8	sent by shifted clear-line key
key_sexit	kEXT	∗9	sent by shifted exit key
key_sf	kind	kF	sent by scroll-forward/down key
key_sfind	kFND	∗0	sent by shifted find key
key_shelp	kHLP	#1	sent by shifted help key
key_shome	kHOM	#2	sent by shifted home key
key_sic	kIC	#3	sent by shifted input key
key_sleft	kLFT	#4	sent by shifted left-arrow key
key_smessage	kMSG	%a	sent by shifted message key
key_smove	kMOV	%b	sent by shifted move key
key_snext	kNXT	%c	sent by shifted next key
key_soptions	kOPT	%d	sent by shifted options key
key_sprevious	kPRV	%e	sent by shifted prev key
key_sprint	kPRT	%f	sent by shifted print key
key_sr	kri	kR	sent by scroll-backward/up key
key_sredo	kRDO	%g	sent by shifted redo key
key_sreplace	kRPL	%h	sent by shifted replace key
key_sright	kRIT	%i	sent by shifted right-arrow key
key_srsume	kRES	%j	sent by shifted resume key
key_ssave	kSAV	!1	sent by shifted save key
key_ssuspend	kSPD	!2	sent by shifted suspend key
key_stab	khts	kT	sent by set-tab key
key_sundo	kUND	!3	sent by shifted undo key
key_suspend	kspd	&7	sent by suspend key
key_undo	kund	&8	sent by undo key
key_up	kcuu1	ku	sent by terminal up-arrow key
keypad_local	rmkx	ke	Out of “keypad-transmit” mode
keypad_xmit	smkx	ks	Put terminal in “keypad-transmit” mode
lab_f0	lf0	l0	Labels on function key f0 if not f0
lab_f1	lf1	l1	Labels on function key f1 if not f1
lab_f2	lf2	l2	Labels on function key f2 if not f2
lab_f3	lf3	l3	Labels on function key f3 if not f3
lab_f4	lf4	l4	Labels on function key f4 if not f4
lab_f5	lf5	l5	Labels on function key f5 if not f5
lab_f6	lf6	l6	Labels on function key f6 if not f6
lab_f7	lf7	l7	Labels on function key f7 if not f7
lab_f8	lf8	l8	Labels on function key f8 if not f8
lab_f9	lf9	l9	Labels on function key f9 if not f9
lab_f10	lf10	la	Labels on function key f10 if not f10
label_format	fln	Lf	Label format
label_off	rmln	LF	Turn off soft labels
label_on	smln	LO	Turn on soft labels
meta_off	rmm	mo	Turn off "meta mode"
meta_on	smm	mm	Turn on "meta mode" (8th bit)
micro_column_address	mhpa	ZY	Like column_address for micro adjustment
micro_down	mcud1	ZZ	Like cursor_down for micro adjustment
micro_left	mcub1	Za	Like cursor_left for micro adjustment
micro_right	mcuf1	Zb	Like cursor_right for micro adjustment
micro_row_address	mvpa	Zc	Like row_address for micro adjustment
micro_up	mcuu1	Zd	Like cursor_up for micro adjustment
mouse_info	minfo	Mi	Mouse status information
newline	nel	nw	Newline (behaves like cr followed by lf)
order_of_pins	porder	Ze	Matches software bits to print-head pins
orig_colors	oc	oc	Set all color(-pair)s to the original ones
orig_pair	op	op	Set default color-pair to the original one
pad_char	pad	pc	Pad character (rather than null)
parm_dch	dch	DC	Delete #1 chars
parm_delete_line	dl	DL	Delete #1 lines
parm_down_cursor	cud	DO	Move down #1 lines.
parm_down_micro	mcud	Zf	Like parm_down_cursor for micro adjust.
parm_ich	ich	IC	Insert #1 blank chars
parm_index	indn	SF	Scroll forward #1 lines.
parm_insert_line	il	AL	Add #1 new blank lines
parm_left_cursor	cub	LE	Move cursor left #1 spaces
parm_left_micro	mcub	Zg	Like parm_left_cursor for micro adjust.
parm_right_cursor	cuf	RI	Move right #1 spaces.
parm_right_micro	mcuf	Zh	Like parm_right_cursor for micro adjust.
parm_rindex	rin	SR	Scroll backward #1 lines.
parm_up_cursor	cuu	UP	Move cursor up #1 lines.
parm_up_micro	mcuu	Zi	Like parm_up_cursor for micro adjust.
pc_term_options	pctrm	S6	PC terminal options
pkey_key	pfkey	pk	Prog funct key #1 to type string #2
pkey_local	pfloc	pl	Prog funct key #1 to execute string #2
pkey_plab	pfxl	xl	Prog key #1 to xmit string #2 and show string #3
pkey_xmit	pfx	px	Prog funct key #1 to xmit string #2
plab_norm	pln	pn	Prog label #1 to show string #2
print_screen	mc0	ps	Print contents of the screen
prtr_non	mc5p	pO	Turn on the printer for #1 bytes
prtr_off	mc4	pf	Turn off the printer
prtr_on	mc5	po	Turn on the printer
pulse	pulse	PU	Select pulse dialing
quick_dial	qdial	QD	Dial phone number #1, without progress detection
remove_clock	rmclk	RC	Remove time-of-day clock
repeat_char	rep	rp	Repeat char #1 #2 times
req_for_input	rfi	RF	Send next input char (for ptys)
req_mouse_pos	reqmp	RQ	Request mouse position report
reset_1string	rs1	r1	Reset terminal completely to sane modes
reset_2string	rs2	r2	Reset terminal completely to sane modes
reset_3string	rs3	r3	Reset terminal completely to sane modes
reset_file	rf	rf	Name of file containing reset string
restore_cursor	rc	rc	Restore cursor to position of last sc
row_address	vpa	cv	Vertical position absolute
save_cursor	sc	sc	Save cursor position
scancode_escape	scesc	S7	Escape for scancode emulation
scroll_forward	ind	sf	Scroll text up
scroll_reverse	ri	sr	Scroll text down
select_char_set	scs	Zj	Select character set
set0_des_seq	s0ds	s0	Shift into codeset 0 (EUC set 0, ASCII)
set1_des_seq	s1ds	s1	Shift into codeset 1
set2_des_seq	s2ds	s2	Shift into codeset 2
set3_des_seq	s3ds	s3	Shift into codeset 3
set_a_background	setab	AB	Set background color using ANSI escape
set_a_foreground	setaf	AF	Set foreground color using ANSI escape
set_attributes	sgr	sa	Define the video attributes #1-#9
set_background	setb	Sb	Set current background color
set_bottom_margin	smgb	Zk	Set bottom margin at current line
set_bottom_margin_parm	smgbp	Zl	Set bottom margin at #1 or #2 lines from bottom
set_clock	sclk	SC	Set time-of-day clock
set_color_band	setcolor	Yz	Change to ribbon color #1
set_color_pair	scp	sp	Set current color-pair
set_foreground	setf	Sf	Set current foreground color1
set_left_margin	smgl	ML	Set left margin at current line
set_left_margin_parm	smglp	Zm	Set left (right) margin at column #1 (#2)
set_lr_margin	smglr	ML	Sets both left and right margins
set_page_length	slines	YZ	Set page length to #1 lines (use tparm)
set_right_margin	smgr	MR	Set right margin at current column
set_right_margin_parm	smgrp	Zn	Set right margin at column #1
set_tab	hts	st	Set a tab in all rows, current column
set_tb_margin	smgtb	MT	Sets both top and bottom margins
set_top_margin	smgt	Zo	Set top margin at current line
set_top_margin_parm	smgtp	Zp	Set top (bottom) margin at line #1 (#2)
set_window	wind	wi	Current window is lines #1-#2 cols #3-#4
start_bit_image	sbim	Zq	Start printing bit image graphics
start_char_set_def	scsd	Zr	Start definition of a character set
stop_bit_image	rbim	Zs	End printing bit image graphics
stop_char_set_def	rcsd	Zt	End definition of a character set
subscript_characters	subcs	Zu	List of “subscript-able” characters
superscript_characters	supcs	Zv	List of “superscript-able” characters
tab	ht	ta	Tab to next 8-space hardware tab stop
these_cause_cr	docr	Zw	Printing any of these chars causes cr
to_status_line	tsl	ts	Go to status line, col #1
tone	tone	TO	Select touch tone dialing
user0	u0	U0	User string 0
user1	u1	U1	User string 1
user2	u2	U2	User string 2
user3	U3	u3	User string 3
user4	u4	u4	User string 4
user5	u5	u5	User string 5
user6	u6	u6	User string 6
user7	u7	u7	User string 7
user8	u8	u8	User string 8
user9	u9	u9	User string 9
underline_char	uc	uc	Underscore one char and move past it
up_half_line	hu	hu	Half-line up (reverse 1/2 linefeed)
wait_tone	wait	WA	Wait for dial tone
xoff_character	xoffc	XF	X-off character
xon_character	xonc	XN	X-on character
zero_motion	zerom	Zx	No motion for the subsequent character

The following are declared as functions and may be defined as macros:

int	tgetent(char bp, char name);
int	tgetflag(char id[2]);
int	tgetnum(char id[2]);
char	tgetstr(char id[2], char *area);
char	tgoto(char cap, int col, int row);
int	tputs(char *str, int affcnt, int (*putc)(void));

Museum