show(1m)
NAME
show - Displays current information about the DTS entity
SYNOPSIS
dtscp show attribute-group | attribute-name
ARGUMENTS
attribute-group
The name of an attribute group or individual attribute to be displayed. The following values are valid:
•all
•all characteristics
•all counters
•all status
•global servers
•local servers
attribute-name
The name of a specific attribute from the characteristics, counters, or status group. The attribute specifiers global servers and local servers do not contain any other attributes.
DESCRIPTION
The show command displays the names and values of the specified attributes or attribute groups. For attribute groups, if you do not supply a group name with the all argument, all characteristics and their values are displayed. The following sections list names of individual attributes, categorized by group. Note that the attributes displayed by the show command might be different, depending upon whether you have requested information about a server or a clerk.
Characteristics
Characteristic arguments can contain a maximum of 80 characters and are recalculated to a normalized date format. For example: Input value: 0-0025:10:99.99999999 Result: 1-01:11:39.990
acting courier role
Specifies whether a backup courier is currently functioning as a courier. If the role is noncourier, the node is not attempting to synchronize with global servers. This characteristic is shown only for servers. Default: noncourier Value: courier or noncourier
automatic tdf change
Specifies whether automatic changes to the time differential factor are enabled or disabled; the value is determined by the operating system. Default: true Value: true/false
check interval
Specifies the amount of time between checks for faulty servers. Applicable only to servers that have external time providers. This characteristic is shown only for servers.
Default: 0-01:30:00.00 Value: 0-00:00:30.000 - 10675199-02:48:05.478
clock adjustment rate
Specifies the rate at which the DTS server or clerk entity adjusts the node’s clock during a synchronization.
clock resolution
Specifies the amount of time between system clock ticks. The value is determined by the operating system.
courier roleSpecifies a server’s interaction with the set of global servers. This characteristic is shown only for servers.
backup courier
The local server becomes a courier if none are available on the LAN.
courierThe local server synchronizes with the global set of servers.
noncourierThe local server does not synchronize with the global set of servers.
Default: noncourier
DTS versionSpecifies the DTS software version installed on the node.
epoch number
Specifies the server’s epoch number. The change command modifies this characteristic. This characteristic is shown only for servers.
Default: 0 Value: 0-255
error tolerance
Specifies the maximum separation allowed between the local clock and the computed time before synchronizations become abrupt rather than gradual (monotonic). Default: 0-00:10:00.000 Value: 0-00:00:00.500 - 10675199-02:48:05.478
global set timeout
Specifies the amount of time the node waits for a response to a WAN synchronization request before sending another request or declaring a global server to be unavailable. The number of attempts made to reach the server is controlled by the query attemps characteristic. Default: 0-00:00:15.000 Value: 0-00:00:00.000 - 0-00:10:00.000
local set timeout
Specifies the amount of time the node waits for a response to a synchronization request before sending another request or declaring a server to be unavailable. The number of attempts made to reach the server is controlled by the query attemps characteristic. Default: 0-00:00:05.000 Value: 0-00:00:00.000 - 0-00:10:00.000
local time differential factor
Specifies the Time Differential Factor (TDF), which is the amount of time the server varies from Greenwich mean time (GMT) or Coordinated Universal Time (UTC). Default: 0-00:00:00.000 Value: -13-00:00:00 - 13-00:00:00
maximum clock drift rate
Specifies the worst-case drift rate of the node’s clock, in nanoseconds per second, as determined by the manufacturer’s specifications.
maximum inaccuracy
Specifies the inaccuracy limit for the node. When the node exceeds the maximum inaccuracy setting, it attempts to synchronize. Default: 0-00:00:00.100 Value: 0-00:00:00.0 - 10675199-02:48:05.478
next tdf change
Specifies the future time at which the time differential factor is automatically changed. The value is determined by the operating system.
query attempts
Specifies the number of attempts that a node makes to contact a server before the node considers the server unavailable. Default: 3 Value: 1-10
server entry name
Specifies a server’s ACL entry name; <hostname> represents the name of the system or node that is the server’s client. The default setting is the recommended value. This characteristic is shown only for servers. Default: /.:/hosts/<hostname>/dts-entity
server group name
Specifies the security group name for the time servers within the cell.
Default: /.:/subsys/dce/dts-servers
server principal name
Specifies a server’s principal name for authentication purposes; <hostname> represents the name of the system or node that is the server’s client. The default setting is the recommended value. This characteristic is shown only for servers.
Default: /.:/hosts/<hostname>/self
servers required
Specifies the minimum number of servers required for a synchronization. Settings of 1 or 2 may cause unreliable computed times.
Default: 3 Value: 1-10
synchronization hold down
Specifies the interval a node must wait to synchronize. Also specifies synchronization frequency when a node reaches the value specified by the maximum inaccuracy characteristic. Clerks: Default: 0-00:10:00.0 Value: 0-00:00:30.0 - 01 00:00:00.00 Servers: Default: 0-00:02.00.0 Value: 0-00:00:30.0 - 01 00:00:00.00
time provider present
Specifies whether or not the entity used an external time provider at the last successful synchronization. This attribute applies to servers only.
time representation version
Specifies the timestamp format used by the node.
typeSpecifies whether the node is a DTS server or clerk. The create command modifies this characteristic.
Counters
clock settingsSpecifies the number of times the node clock has been set nonmonotonically (abruptly).
creation timeSpecifies the time at which the DTS entity was created and the counters were initialized.
different epochs detected
Specifies the number of times the node received time response messages from servers or clerks that had epoch numbers different from its own. This counter is shown only for servers.
disable directives completed
Specifies the number of times the DTS has been disabled.
enable directives completed
Specifies the number of times the DTS has been enabled.
epoch changes completed
Specifies the number of times the server’s epoch has changed.
insufficient resources detected
Specifies the number of times the node has been unable to allocate virtual memory.
local servers not in group
Specifies the number of times that a local server was contacted, but it was not in the dts security group.
local times not intersecting
Specifies the number of times the node’s time interval failed to intersect with the computed interval of the servers.
no global servers detected
Specifies the number of times the courier server could not contact any global servers. This counter is shown only for servers.
protocol mismatches detected
Specifies the number of times the local node failed to process a received message containing an incompatible protocol version.
servers not in group
Specifies the number of times that a non-local server was contacted, but it was not in the dts security group. This counter is shown only for servers.
servers not responding
Specifies the number of times the courier server could not contact a specific global server. This counter is shown only for servers.
servers times not intersecting
Specifies the number of times a server has detected faulty servers (other than itself). This counter is shown only for servers.
synchronizations completed
Specifies the number of times the node successfully synchronized.
system errors detected
Specifies the number of times a DTS operation detected a system error.
time provider failures detected
Specifies the number of times the external time provider signaled a failure or the node was unable to access the time provider.
time provider timeouts detected
Specifies the number of times a dtsd server process initiated contact with a time provider and did not receive the initial response within the interval specified by local set timeout (the default interval is 5 seconds). This counter is shown only for servers.
time representation version mismatches detected
Specifies the number of times the local node failed to process a received message containing an incompatible timestamp format.
too few servers detected
Specifies the number of times a node failed to synchronize because it could not contact the required minimum number of servers.
updates initiated
Specifies the number of times a server has attempted to update its clock. This counter is shown only for servers.
Status
current timeSpecifies the current time on the node.
global serversSpecifies the set of global servers known by the node.
last synchronization
Specifies the computed time at the last attempted synchronization.
local serversSpecifies the set of local servers known by the node.
stateSpecifies the state of the DTS entity.
offThe DTS entity is disabled.
onThe DTS entity is enabled.
synchronizingThe DTS entity is synchronizing.
updatingThe DTS entity is updating the time.
uidSpecifies the entity’s unique identifier, which is generated when the entity is created. This attribute is shown only for servers.
Privilege Required
You must have read permission on the ACL associated with the DTS entity in order to execute the command.
NOTE
This command is replaced at Revision 1.1 by the dcecp command and may not be provided in future releases of DCE.
EXAMPLES
1.The following command shows how to display the current time:
dtscp> show current time
Current Time = 1990-11-30-12:11:41.718-05:00I0.359 EST
2.The following command shows how to display all of the entity’s characteristic attribute settings:
dtscp> show all
Check Interval = +0-01:30:00.000I-----
Epoch Number = 0
Error Tolerance = +0-00:10:00.000I-----
Local Time Differential Factor = -0-04:00:00.000I-----
Maximum Inaccuracy = +0-00:00:00.100I-----
Servers Required = 3
Query Attempts = 3
Local Set Timeout = +0-00:00:05.000I-----
Global Set Timeout = +0-00:00:15.000I-----
Synchronization Hold Down = +0-00:02:00.000I-----
Type = Server
Courier Role = NonCourier
Acting Courier Role = NonCourier
Clock Adjustment Rate = 40000000 nsec/sec
Maximum Clock Drift Rate = 1000000 nsec/sec
Clock Resolution = 10000000 nsec
DTS Version = V1.0.1
Time Representation Version = V1.0.0
Time Provider Present = FALSE
Automatic TDF Change = FALSE
Next TDF Change = 1993-10-31-06:00:00.000+00:00I0.000
Server Principal Name = hosts/system1/self
Server Entry Name = hosts/system1/dts-entity
Server Group Name = subsys/dce/dts-servers
3.The following command displays the current values of all characteristic attributes:
dtscp> show all characteristics
This command produces the same output as does the show all command.
4.The following command shows how to display all of the local servers known to the entity:
dtscp> show local servers
Known Servers
============================================================
Local /.../sisyphus.osf.org/hosts/system2/self
Last Time Polled = 1993-10-15-21:01:46.124+00:00I0.809
Last Observed Time = 1993-10-15-21:03:09.041+00:00I-----
Last Observed Skew = +0-00:01:22.917I-----
Used in Last Synchronization = TRUE
Transport Type = RPC
Local /.../sisyphus.osf.org/hosts/system3/self
Last Time Polled = 1993-10-15-21:01:46.124+00:00I0.809
Last Observed Time = 1993-10-15-21:01:46.143+00:00I0.817
Last Observed Skew = +0-00:00:00.019I1.625
Used in Last Synchronization = TRUE
Transport Type = RPC
5.The following command displays the current values of all counter attributes:
dtscp> show all counters
Creation Time = 1993-10-14-16:23:57.801+00:00I0.767
Local Times Not Intersecting = 0
Server Times Not Intersecting = 0
Different Epochs Detected = 0
Too Few Servers Detected = 0
Time Provider Timeouts Detected = 1
Protocol Mismatches Detected = 0
Time Representation Mismatches Detected = 0
No Global Servers Detected = 0
Servers Not Responding = 0
Clock Settings = 0
Epoch Changes Completed = 0
System Errors Detected = 0
Synchronizations Completed = 865
Updates Initiated = 0
Enable Directives Completed = 1
Disable Directives Completed = 0
Insufficient Resources Detected = 0
Time Provider Failures Detected = 0
Local server not in group = 0
Servers not in group = 0
6.The following command displays the current values of all status attributes:
dtscp> show all status
UID = 00004e34-5e1c-2c87-8500-08005a0d4582
Last Synchronization = 1993-10-15-21:05:43.023+00:00I-----
State = On
7.The following command displays the current value of the courier role attribute:
dtscp> show courier role
Courier Role = NonCourier
8.The following command displays the server entry name for this server:
dtscp> show server entry name
Server Entry Name = hosts/system1/dts-entity
9.The following command displays the current state of the Time Service entity:
dtscp> show state
State = On
10.The following command displays the current value of the check interval attribute:
dtscp> show check interval
Check Interval = +0-01:30:00.000I-----
11.The following command displays the current value of the servers times not intersecting counter:
dtscp> show servers times not intersecting
Server Times Not Intersecting = 0
RELATED INFORMATION
Commands: set(1m)
Hewlett-Packard Company — OSF DCE 1.1/HP DCE 1.5