power_onoff(1M) — Series 800 Only

NAME

power_onoff − timed, automatic system power on, and power off

SYNOPSIS

/usr/sbin/power_onoff -n
/usr/sbin/power_onoff time [date] [[next | +increment] time_designation]

DESCRIPTION

power_onoff instructs the UPS monitor (ups_mond) to shut down the system, and optionally informs the monitor when to power on the system again. The UPS monitor in turn instructs the uninterruptible power source (UPS) when to turn the power off and on. The UPS monitor then proceeds to shut down the system. The time to restart the system (power on) is specified with power_onoff command-line arguments.

Some UPS units limit the time that can elapse between the time the power is turned off and the time it is turned back on. Please see your UPS documentation for information about limitations.

power_onoff requires a UPS that is supported by the UPS monitor (see ups_mond(1M)).

Command Line Arguments

The power_onoff command has two forms, and recognizes the following arguments:

-n No power on. Causes the system to be shutdown and not be powered back on.

time Can be specified as one, two, or four digits. One- and two-digit numbers represent hours; four digits represent hours and minutes. time can also be specified as two numbers separated by a colon (:), single quote (’), the letter "h" (h), a period (.), or comma (,). A suffix am or pm can be appended. Otherwise a 24-hour clock time is understood. For example, 0815, 8:15, 8’15, 8h15, 8.15, and 8,15 are read as 15 minutes after 8 in the morning. The suffixes zulu and utc can be used to indicate Coordinated Universal Time. The special names noon, midnight, now, and next are also recognized.

date Can be specified as either a day of the week (fully spelled out or abbreviated) or a date consisting of a day, a month, and optionally a year. The day and year fields must be numeric, and the month can be fully spelled out, abbreviated, or numeric. These three fields can be in any order, and be separated by punctuation marks such as /, -, ., or ,. Two special “days”, today and tomorrow, are also recognized. If no date is given, today is assumed if the given time is greater than the current time; tomorrow is assumed if it is less. If the given month is less than the current month (and no year is given), next year is assumed.

+increment If followed by a time_designation of minutes, hours, days, weeks, months, or years, lets the user startup the system when the specified time_designation has elapsed. A numerical operator, +increment, enables the user to schedule the startup several hours, days, weeks, months, or years in advance (see EXAMPLES). Using the argument next is equivalent to using an increment of +1. Both plural and singular forms of time_designation are accepted.

EXTERNAL INFLUENCES

International Code Set Support

Single- and multi-byte character code sets are supported.

RETURN VALUE

Exit code 0 is returned upon successful completion, otherwise non 0 is returned.

DIAGNOSTICS

power_onoff issues diagnostic messages when it encounters syntax errors and out-of-range times.

EXAMPLES

To startup the system at 5:00 am next Tuesday, use

power_onoff 5am Tuesday next week

To startup the system at 5:30 am tomorrow, use

power_onoff 5:30 tomorrow

To make your system startup each weekday at 7:30am and shutdown at 5:30pm each week day, use crontab to execute the first entry on Monday through Thursday and the second entry on Friday (see crontab(1)).

power_onoff 7:30 tomorrow

power_onoff 7:30 Monday

To startup the system at 8:15 on January 24, use

power_onoff 0815 Jan 24

To startup the system at 5:15 on January 24, use

power_onoff 8:15 Jan 24

To startup the system at 9:30 tomorrow, use

power_onoff 9:30am tomorrow

To startup the system 24 hours from now, use

power_onoff now + 1 day

To shutdown the system and not start it up, use

power_onoff -n

WARNINGS

Some UPS units limit the time that can elapse between the time the power is turned off and the time it is turned back on. Please see your UPS documentation for information about limitations.

If the date argument begins with a number and the time argument is also numeric (and without suffix), the time argument should be a four-digit number that can be correctly interpreted as hours and minutes.

Do not use both next and + increment within a single power_onoff command; only the first operator is accepted and the trailing operator is ignored. No warning or error is produced.

The power cord must be disconnected before servicing the unit.

AUTHOR

power_onoff was developed by HP.

FILES

/var/tmp/timed_off fifo for communicating with ups_mond.

Museum

Related Articles