NAME

disable - Stops the DCE DTS entity on the local node

SYNOPSIS

dtscp disable

DESCRIPTION

The disable command turns off the DCE DTS entity on the system where the command is entered. When the command is executed, the status attribute state is set to off. 

Privilege Required

You must have write permission on the ACL associated with the DTS entity in order to execute the command. 

NOTES

The DCE DTS entity cannot be disabled until it is enabled with the enable command. You must enter the disable command before you can delete the entity.  This command is replaced at Revision 1.1 by the dcecp command and may not be provided in future releases of DCE. 

EXAMPLES

dtscp> disable

RELATED INFORMATION

Commands: enable (1m), delete (1m), create (1m)

Hewlett-Packard Company  —  OSF DCE 1.1/HP DCE 1.5