rarpd(1M) UNIX System V(Internet Utilities) rarpd(1M)
NAME
rarpd - DARPA Reverse Address Resolution Protocol server
SYNOPSIS
rarpd interface [ hostname ]
/usr/sbin/rarpd -a
DESCRIPTION
rarpd starts a daemon that responds to Reverse Address Resolution
Protocol (RARP) requests. The daemon forks a copy of itself that runs in
background. It must be run as root.
RARP is used by machines at boot time to discover their Internet Protocol
(IP) address. The booting machine provides its Ethernet Address in a
RARP request message. Using the ethers and hosts databases, rarpd maps
this Ethernet Address into the corresponding IP address which it returns
to the booting machine in an RARP reply message. The booting machine
must be listed in both databases for rarpd to locate its IP address.
rarpd issues no reply when it fails to locate an IP address.
In the first synopsis, the interface parameter names the network
interface upon which rarpd is to listen for requests. The interface
parameter takes the ``name unit'' form used by ifconfig(1M). The second
argument, hostname, is used to obtain the IP address of that interface.
An IP address in ``decimal dot'' notation may be used for hostname. If
hostname is omitted, the address of the interface will be obtained from
the kernel. When the first form of the command is used, rarpd must be
run separately for each interface on which RARP service is to be
supported. A machine that is a router may invoke rarpd multiple times,
for example:
/usr/sbin/rarpd emd1 host
/usr/sbin/rarpd emd2 host-backbone
In the second synopsis, rarpd locates all of the network interfaces
present on the system and starts a daemon process for each one that
supports RARP.
FILES
/etc/ethers
/etc/hosts
SEE ALSO
ifconfig(1M), ethers(4), hosts(4), netconfig(4), boot(8)
Finlayson, Ross, Timothy Mann, Jeffrey Mogul, and Marvin Theimer, A
Reverse Address Resolution Protocol, RFC 903, Network Information Center,
SRI International, Menlo Park, Calif., June 1984.
10/89 Page 1