sad(7) DG/UX R4.11MU05 sad(7)
NAME
sad - STREAMS Administrative Driver
SYNOPSIS
#include <sys/types.h>
#include <sys/conf.h>
#include <sys/sad.h>
#include <sys/stropts.h>
int ioctl (fildes, command, arg);
int fildes, command;
DESCRIPTION
The STREAMS Administrative Driver provides an interface for
applications to perform administrative operations on STREAMS modules
and drivers. The interface is provided through ioctl(2) commands.
Privileged operations may access the sad driver via /dev/sad/admin.
Unprivileged operations may access the sad driver via /dev/sad/user.
Appropriate privilege is required to open the /dev/sad/admin driver.
For systems supporting the DG/UX Capability Option, appropriate
privilege is defined as having one or more specific capabilities
enabled in the effective capability set of the user. See
capdefaults(5) for the default capabilities for this command.
On generic DG/UX systems, appropriate privilege means that your
process has an effective UID of root. See the
appropriateprivilege(5) man page for more information.
fildes is an open file descriptor that refers to the sad driver.
command determines the control function to be performed as described
below. arg represents additional information that is needed by this
command. The type of arg depends upon the command, but it is
generally an integer or a pointer to a command-specific data
structure.
Command Functions
The autopush facility [see autopush(1M)] allows one to configure a
list of modules to be automatically pushed on a stream when a driver
is first opened. Autopush is controlled by the next commands.
SADSAP Allows the administrator to configure the autopush
information for the given device. arg points to a
strapush structure which contains the following members:
uint sapcmd;
long sapmajor;
long sapminor;
long saplastminor;
long sapnpush;
uint saplist[MAXAPUSH] [FMNAMESZ + 1];
The sapcmd field indicates the type of configuration
being done. It may take on one of the following values:
SAPONE Configure one minor device of a driver.
SAPRANGE Configure a range of minor devices of a
driver.
SAPALL Configure all minor devices of a driver.
SAPCLEAR Undo configuration information for a
driver.
The sapmajor field is the major device number of the
device to be configured. The sapminor field is the
minor device number of the device to be configured. The
saplastminor field is used only with the SAPRANGE
command, with which a range of minor devices between
sapminor and saplastminor, inclusive, are to be
configured. The minor fields have no meaning for the
SAPALL command. The sapnpush field indicates the
number of modules to be automatically pushed when the
device is opened. It must be less than or equal to
MAXAPUSH, defined in sad.h. It must also be less than
or equal to NSTRPUSH, the maximum number of modules that
can be pushed on a stream, defined in the kernel master
file. The field saplist is an array of module names to
be pushed in the order in which they appear in the list.
When using the SAPCLEAR command, the user sets only
sapmajor and sapminor. This will undo the
configuration information for any of the other commands.
If a previous entry was configured as SAPALL, sapminor
should be set to zero. If a previous entry was
configured as SAPRANGE, sapminor should be set to the
lowest minor device number in the range configured.
On failure, errno is set to the following value:
EFAULT arg points outside the allocated address
space.
EINVAL The major device number is invalid, the
number of modules is invalid, or the list
of module names is invalid.
ENOSTR The major device number does not represent
a STREAMS driver.
EEXIST The major-minor device pair is already
configured.
ERANGE The command is SAPRANGE and saplastminor
is not greater than sapminor, or the
command is SAPCLEAR and sapminor is not
equal to the first minor in the range.
ENODEV The command is SAPCLEAR and the device is
not configured for autopush.
ENOSR An internal autopush data structure cannot
be allocated.
SADGAP Allows any user to query the sad driver to get the
autopush configuration information for a given device.
arg points to a strapush structure as described in the
previous command.
The user should set the sapmajor and sapminor fields
of the strapush structure to the major and minor device
numbers, respectively, of the device in question. On
return, the strapush structure will be filled in with
the entire information used to configure the device.
Unused entries in the module list will be zero-filled.
On failure, errno is set to one of the following values:
EFAULT arg points outside the allocated address
space.
EINVAL The major device number is invalid.
ENOSTR The major device number does not represent
a STREAMS driver.
ENODEV The device is not configured for autopush.
SADVML Allows any user to validate a list of modules (i.e., to
see if they are installed on the system.) arg is a
pointer to a strlist structure with the following
members:
int slnmods;
struct strmlist*slmodlist;
The strmlist structure has the following member:
char lname[FMNAMESZ+1];
slnmods indicates the number of entries the user has
allocated in the array and slmodlist points to the
array of module names. The return value is 0 if the
list is valid, 1 if the list contains an invalid module
name, or -1 on failure. On failure, errno is set to one
of the following values:
EFAULT arg points outside the allocated address
space.
EINVAL The slnmods field of the strlist
structure is less than or equal to zero.
DIAGNOSTICS
Unless specified otherwise above, the return value from ioctl is 0
upon success and -1 upon failure with errno set as indicated.
SEE ALSO
intro(2), ioctl(2), open(2). appropriateprivilege(5),
capdefaults(5).
Licensed material--property of copyright holder(s)