XChangeKeyboardControl(3X11) SDK X11 R4.11MU05 XChangeKeyboardControl(3X11)
NAME
XChangeKeyboardControl, XGetKeyboardControl, XAutoRepeatOn,
XAutoRepeatOff, XBell, XQueryKeymap, XKeyboardControl - manipulate
keyboard settings and keyboard control structure
SYNTAX
XChangeKeyboardControl(display, valuemask, values)
Display *display;
unsigned long valuemask;
XKeyboardControl *values;
XGetKeyboardControl(display, valuesreturn)
Display *display;
XKeyboardState *valuesreturn;
XAutoRepeatOn(display)
Display *display;
XAutoRepeatOff(display)
Display *display;
XBell(display, percent)
Display *display;
int percent;
XQueryKeymap(display, keysreturn)
Display *display;
char keysreturn[32];
ARGUMENTS
display Specifies the connection to the X server.
keysreturn
Returns an array of bytes that identifies which keys are
pressed down. Each bit represents one key of the keyboard.
percent Specifies the volume for the bell, which can range from
-100 to 100 inclusive.
valuemask
Specifies which controls to change. This mask is the
bitwise inclusive OR of the valid control mask bits.
values Specifies one value for each bit set to 1 in the mask.
valuesreturn
Returns the current keyboard controls in the specified
XKeyboardState structure.
DESCRIPTION
The XChangeKeyboardControl function controls the keyboard
characteristics defined by the XKeyboardControl structure. The
value_mask argument specifies which values are to be changed.
XChangeKeyboardControl can generate BadMatch and BadValue errors.
The XGetKeyboardControl function returns the current control values
for the keyboard to the XKeyboardState structure.
The XAutoRepeatOn function turns on auto-repeat for the keyboard on
the specified display.
The XAutoRepeatOff function turns off auto-repeat for the keyboard on
the specified display.
The XBell function rings the bell on the keyboard on the specified
display, if possible. The specified volume is relative to the base
volume for the keyboard. The default value for the bell percent is
50. If the value for the percent argument is not in the range -100
to 100 inclusive, a BadValue error results. The volume at which the
bell rings when the percent argument is nonnegative is:
base - [(base * percent) / 100] + percent
The volume at which the bell rings when the percent argument is
negative is:
base + [(base * percent) / 100]
To change the base volume of the bell, use XChangeKeyboardControl.
XBell can generate a BadValue error.
The XQueryKeymap function returns a bit vector for the logical state
of the keyboard, where each bit set to 1 indicates that the
corresponding key is currently pressed down. The vector is
represented as 32 bytes. Byte N (from 0) contains the bits for keys
8N to 8N + 7 with the least-significant bit in the byte representing
key 8N.
Note that the logical state of a device (as seen by client
applications) may lag the physical state if device event processing
is frozen.
STRUCTURES
The XKeyboardControl structure contains:
/* Mask bits for ChangeKeyboardControl */
#define KBKeyClickPercent (1L<<0)
#define KBBellPercent (1L<<1)
#define KBBellPitch (1L<<2)
#define KBBellDuration (1L<<3)
#define KBLed (1L<<4)
#define KBLedMode (1L<<5)
#define KBKey (1L<<6)
#define KBAutoRepeatMode (1L<<7)
/* Values */
typedef struct {
int key_click_percent;
int bell_percent;
int bell_pitch;
int bell_duration;
int led;
int led_mode; /* LedModeOn, LedModeOff */
int key;
int auto_repeat_mode;/* AutoRepeatModeOff, AutoRepeatModeOn,
AutoRepeatModeDefault */
} XKeyboardControl;
The key_click_percent member sets the volume for key clicks between 0
(off) and 100 (loud) inclusive, if possible. A setting of -1
restores the default. Other negative values generate a BadValue
error.
The bell_percent sets the base volume for the bell between 0 (off)
and 100 (loud) inclusive, if possible. A setting of -1 restores the
default. Other negative values generate a BadValue error. The
bell_pitch member sets the pitch (specified in Hz) of the bell, if
possible. A setting of -1 restores the default. Other negative
values generate a BadValue error. The bell_duration member sets the
duration of the bell specified in milliseconds, if possible. A
setting of -1 restores the default. Other negative values generate a
BadValue error.
If both the led_mode and led members are specified, the state of that
LED is changed, if possible. The led_mode member can be set to
LedModeOn or LedModeOff. If only led_mode is specified, the state of
all LEDs are changed, if possible. At most 32 LEDs numbered from one
are supported. No standard interpretation of LEDs is defined. If
led is specified without led_mode, a BadMatch error results.
If both the auto_repeat_mode and key members are specified, the
auto_repeat_mode of that key is changed (according to
AutoRepeatModeOn, AutoRepeatModeOff, or AutoRepeatModeDefault), if
possible. If only auto_repeat_mode is specified, the global
auto_repeat_mode for the entire keyboard is changed, if possible, and
does not affect the per key settings. If a key is specified without
an auto_repeat_mode, a BadMatch error results. Each key has an
individual mode of whether or not it should auto-repeat and a default
setting for the mode. In addition, there is a global mode of whether
auto-repeat should be enabled or not and a default setting for that
mode. When global mode is AutoRepeatModeOn, keys should obey their
individual auto-repeat modes. When global mode is AutoRepeatModeOff,
no keys should auto-repeat. An auto-repeating key generates
alternating KeyPress and KeyRelease events. When a key is used as a
modifier, it is desirable for the key not to auto-repeat, regardless
of its auto-repeat setting.
The XKeyboardState structure contains:
typedef struct {
int key_click_percent;
int bell_percent;
unsigned int bell_pitch, bell_duration;
unsigned long led_mask;
int global_auto_repeat;
char auto_repeats[32];
} XKeyboardState;
For the LEDs, the least-significant bit of led_mask corresponds to
LED one, and each bit set to 1 in led_mask indicates an LED that is
lit. The global_auto_repeat member can be set to AutoRepeatModeOn or
AutoRepeatModeOff. The auto_repeats member is a bit vector. Each
bit set to 1 indicates that auto-repeat is enabled for the
corresponding key. The vector is represented as 32 bytes. Byte N
(from 0) contains the bits for keys 8N to 8N + 7 with the least-
significant bit in the byte representing key 8N.
DIAGNOSTICS
BadMatch Some argument or pair of arguments has the correct type and
range but fails to match in some other way required by the
request.
BadValue Some numeric value falls outside the range of values
accepted by the request. Unless a specific range is
specified for an argument, the full range defined by the
argument's type is accepted. Any argument defined as a set
of alternatives can generate this error.
SEE ALSO
XChangeKeyboardMapping(3X11), XSetPointerMapping(3X11)
Xlib - C Language X Interface
Licensed material--property of copyright holder(s)