named-xfer(1M)                 DG/UX R4.11MU05                named-xfer(1M)


NAME
       named-xfer - ancillary agent for inbound zone transfers

SYNOPSIS
       named-xfer -z zonetotransfer -f dbfile -s serialno [ -d
       debuglevel ] [ -l debuglogfile ] [ -t tracefile ] [ -p port# ] [
       -S ] nameserver

DESCRIPTION
       Named-xfer is an ancillary program executed by named(1M) to perform
       an inbound zone transfer.  It is rarely executed directly, and only
       by system administrators who are trying to debug a zone transfer
       problem.  See RFCs 1033, 1034, and 1035 for more information on the
       Internet name-domain system.

       Options are:

       -z     specifies the name of the zone to be transferred.

       -f     specifies the name of the file into which the zone should be
              dumped when it is received from the primary server.

       -s     specifies the serial number of our current copy of this zone.
              If the SOA RR we get from the primary server does not have a
              serial number higher than this, the transfer will be aborted.

       -d     Print debugging information.  A number after the ``d''
              determines the level of messages printed.  All messages are
              written to /var/tmp/xfer.ddt.XXXXXX unless the -l option is
              specified.

       -l     Specifies a log file for debugging messages.  The specified
              log file name will have /var/tmp directory.  Note that debug
              messages will be generated only if -d is also specified.

       -t     Specifies a trace file which will contain a protocol trace of
              the zone transfer.  This is probably only of interest to
              people debugging the name server itself.

       -p     Use a different port number.  The default is port number 53.

       -S     Perform a restricted transfer of only the SOA, NS records and
              glue A records for the zone. The SOA record will not be loaded
              by named but will be used to determine when to verify the NS
              records.  See the ``stubs'' directive in named(1M) for more
              information.

       Additional arguments are taken as name server addresses in so-called
       ``dotted-quad'' syntax only; no host names are allowed here.  At
       least one address must be specified.  Any additional addresses will
       be tried in order if the first one fails to transfer to us
       successfully.

SEE ALSO
       named(1M), resolver(3C), resolv.conf(4M); RFC 882, RFC 883, RFC 973,
       RFC 974, RFC 1033, RFC 1034, RFC 1035, RFC 1123.


Licensed material--property of copyright holder(s)