GZIP(1) DG/UX R4.11MU05 GZIP(1)
NAME
gzip, gunzip, gzcat - GNU compress or expand files
SYNOPSIS
gzip [ -cdfhlLnNqrtvV19 ] [ -S suffix ] [ name... ]
gunzip [ -cfhlLnNqrtvV ] [ -S suffix ] [ name... ]
gzcat [ -fhLV ] [ name... ]
DESCRIPTION
gzip reduces the size of the named files using Lempel-Ziv coding
(LZ77). Whenever possible, each file is replaced by one with the
extension .gz, while keeping the same ownership modes, access and
modification times. If no files are specified, or if a file name is
"-", the standard input is compressed to the standard output. gzip
will only attempt to compress regular files. In particular, it will
ignore symbolic links.
If the compressed file name is too long for its file system, gzip
truncates it. gzip attempts to truncate only the parts of the file
name longer than 3 characters. (A part is delimited by dots.) If the
name consists of small parts only, the longest parts are truncated.
For example, if file names are limited to 14 characters,
gzip.msdos.exe is compressed to gzi.msd.exe.gz. Names are not
truncated on systems which do not have a limit on file name length.
By default, gzip keeps the original file name and timestamp in the
compressed file. These are used when decompressing the file with the
-N option. This is useful when the compressed file name was truncated
or when the time stamp was not preserved after a file transfer.
Compressed files can be restored to their original form using gzip -d
or gunzip or gzcat. If the original name saved in the compressed
file is not suitable for its file system, a new name is constructed
from the original one to make it legal.
gunzip takes a list of files on its command line and replaces each
file whose name ends with .gz, -gz, .z, -z, _z or .Z and which begins
with the correct magic number with an uncompressed file without the
original extension. gunzip also recognizes the special extensions
.tgz and .taz as shorthands for .tar.gz and .tar.Z respectively.
When compressing, gzip uses the .tgz extension if necessary instead
of truncating a file with a .tar extension.
gunzip can currently decompress files created by gzip, zip, compress
or pack. The detection of the input format is automatic. When using
the first two formats, gunzip checks a 32 bit CRC. For pack, gunzip
checks the uncompressed length. The standard compress format was not
designed to allow consistency checks. However gunzip is sometimes
able to detect a bad .Z file. If you get an error when uncompressing
a .Z file, do not assume that the .Z file is correct simply because
the standard uncompress does not complain. This generally means that
the standard uncompress does not check its input, and happily
generates garbage output.
Files created by zip can be uncompressed by gzip only if they have a
single member compressed with the 'deflation' method. This feature is
only intended to help conversion of tar.zip files to the tar.gz
format. To extract zip files with several members, use unzip instead
of gunzip.
gzcat is identical to gunzip -c. gzcat uncompresses either a list of
files on the command line or its standard input and writes the
uncompressed data on standard output. gzcat will uncompress files
that have the correct magic number whether they have a .gz suffix or
not.
gzip uses the Lempel-Ziv algorithm. The amount of compression
obtained depends on the size of the input and the distribution of
common substrings. Typically, text such as source code or English is
reduced by 60-70%. Compression is generally much better than that
achieved by LZW (as used in compress), Huffman coding (as used in
pack), or adaptive Huffman coding.
Compression is always performed, even if the compressed file is
slightly larger than the original. The worst case expansion is a few
bytes for the gzip file header, plus 5 bytes every 32K block, or an
expansion ratio of 0.015% for large files. Note that the actual
number of used disk blocks almost never increases. gzip preserves
the mode, ownership and timestamps of files when compressing or
decompressing.
OPTIONS
-c --stdout --to-stdout
Write output on standard output; keep original files
unchanged. If there are several input files, the output
consists of a sequence of independently compressed members. To
obtain better compression, concatenate all input files before
compressing them.
-d --decompress --uncompress
Decompress.
-f --force
Force compression or decompression even if the file has
multiple links or the corresponding file already exists, or if
the compressed data is read from or written to a terminal. If
the input data is not in a format recognized by gzip, and if
the option --stdout is also given, copy the input data without
change to the standard ouput: let gzcat behave as cat. If -f
is not given, and when not running in the background, gzip
prompts to verify whether an existing file should be
overwritten.
-h --help
Display a help screen and quit.
-l --list
For each compressed file, list the following fields:
compressed size: size of the compressed file
uncompressed size: size of the uncompressed file
ratio: compression ratio (0.0% if unknown)
uncompressed_name: name of the uncompressed file
The uncompressed size is given as -1 for files not in gzip
format, such as compressed .Z files. To get the uncompressed
size for such a file, you can use:
gzcat file.Z | wc -c
In combination with the --verbose option, the following fields
are also displayed:
method: compression method
crc: the 32-bit CRC of the uncompressed data
date & time: time stamp for the uncompressed file
The compression methods currently supported are deflate,
compress, lzh and pack. The crc is given as ffffffff for a
file not in gzip format.
With --name, the uncompressed name, date and time are those
stored within the compress file if present.
With --verbose, the size totals and compression ratio for all
files is also displayed, unless some sizes are unknown. With
--quiet, the title and totals lines are not displayed.
-L --license
Display the gzip license and quit.
-n --no-name
When compressing, do not save the original file name and time
stamp by default. (The original name is always saved if the
name had to be truncated.) When decompressing, do not restore
the original file name if present (remove only the gzip suffix
from the compressed file name) and do not restore the original
time stamp if present (copy it from the compressed file). This
option is the default when decompressing.
-N --name
When compressing, always save the original file name and time
stamp; this is the default. When decompressing, restore the
original file name and time stamp if present. This option is
useful on systems which have a limit on file name length or
when the time stamp has been lost after a file transfer.
-q --quiet
Suppress all warnings.
-r --recursive
Travel the directory structure recursively. If any of the file
names specified on the command line are directories, gzip will
descend into the directory and compress all the files it finds
there (or decompress them in the case of gunzip ).
-S .suf --suffix .suf
Use suffix .suf instead of .gz. Any suffix can be given, but
suffixes other than .z and .gz should be avoided to avoid
confusion when files are transferred to other systems. A null
suffix forces gunzip to try decompression on all given files
regardless of suffix, as in:
gunzip -S "" *
Previous versions of gzip used the .z suffix. This was changed
to avoid a conflict with pack(1).
-t --test
Test. Check the compressed file integrity.
-v --verbose
Verbose. Display the name and percentage reduction for each
file compressed or decompressed.
-V --version
Version. Display the version number and compilation options
then quit.
-# --fast --best
Regulate the speed of compression using the specified digit #,
where -1 or --fast indicates the fastest compression method
(less compression) and -9 or --best indicates the slowest
compression method (best compression). The default
compression level is -4 (that is, achieving a balance between
the compression verses speed tradeoff).
ADVANCED USAGE
Multiple compressed files can be concatenated. In this case, gunzip
will extract all members at once. For example:
gzip -c file1 > foo.gz
gzip -c file2 >> foo.gz
Then
gunzip -c foo
is equivalent to
cat file1 file2
In case of damage to one member of a .gz file, other members can
still be recovered (if the damaged member is removed). However, you
can get better compression by compressing all members at once:
cat file1 file2 | gzip > foo.gz
compresses better than
gzip -c file1 file2 > foo.gz
If you want to recompress concatenated files to get better
compression, do:
gzip -cd old.gz | gzip > new.gz
If a compressed file consists of several members, the uncompressed
size and CRC reported by the --list option applies to the last member
only. If you need the uncompressed size for all members, you can use:
gzip -cd file.gz | wc -c
If you wish to create a single archive file with multiple members so
that members can later be extracted independently, use an archiver
such as tar or zip. GNU tar supports the -z option to invoke gzip
transparently. gzip is designed as a complement to tar, not as a
replacement.
ENVIRONMENT
The environment variable GZIP can hold a set of default options for
gzip. These options are interpreted first and can be overwritten by
explicit command line parameters. For example:
for sh: GZIP="-8v --name"; export GZIP
for csh: setenv GZIP "-8v --name"
DIAGNOSTICS
Exit status is normally 0; if an error occurs, exit status is 1. If a
warning occurs, exit status is 2.
Usage: gzip [-cdfhlLnNrtvV19] [-S suffix] [file ...]
Invalid options were specified on the command line.
file : not in gzip format
The file specified to gunzip has not been compressed.
file: Corrupt input. Use gzcat to recover some data.
The compressed file has been damaged. The data up to the
point of failure can be recovered using
gzcat file > recover
file : compressed with xx bits, can only handle yy bits
File was compressed (using LZW) by a program that could deal
with more bits than the decompress code on this machine.
Recompress the file with gzip, which compresses better and
uses less memory.
file : already has .gz suffix -- no change
The file is assumed to be already compressed. Rename the
file and try again.
file already exists; do you wish to overwrite (y or n)?
Respond "y" if you want the output file to be replaced; "n"
if not.
gunzip: corrupt input
A SIGSEGV violation was detected which usually means that the
input file has been corrupted.
xx.x%
Percentage of the input saved by compression. (Relevant only
for -v and -l.)
-- not a regular file or directory: ignored
When the input file is not a regular file or directory, (e.g.
a symbolic link, socket, FIFO, device file), it is left
unaltered.
-- has xx other links: unchanged
The input file has links; it is left unchanged. See ln(1)
for more information. Use the -f flag to force compression of
multiply-linked files.
SEE ALSO
compress(1), pack(1).
See /usr/lib/info/gzip.info which contains the GNU General Public
License and is the info file for gzip.
CAVEATS
When writing compressed data to a tape, it is generally necessary to
pad the output with zeroes up to a block boundary. When the data is
read and the whole block is passed to gunzip for decompression,
gunzip detects that there is extra trailing garbage after the
compressed data and emits a warning by default. You have to use the
--quiet option to suppress the warning. This option can be set in the
GZIP environment variable as in:
for sh: GZIP="-q" tar -xfz --block-compress /dev/rst0
for csh: (setenv GZIP -q; tar -xfz --block-compr /dev/rst0
In the above example, gzip is invoked implicitly by the -z option of
GNU tar. Make sure that the same block size (-b option of tar) is
used for reading and writing compressed data on tapes. (This example
assumes you are using the GNU version of tar.)
BUGS
The --list option reports incorrect sizes if they exceed 2 gigabytes.
The --list option reports sizes as -1 and crc as ffffffff if the
compressed file is on a non seekable media.
In some rare cases, the --best option gives worse compression than
the default compression level (-4). On some highly redundant files,
compress compresses better than gzip.
Licensed material--property of copyright holder(s)