probedev(1M) — DG/UX 5.4R3.00



probedev(1M)                   DG/UX 5.4R3.00                   probedev(1M)


NAME
       probedev - probe system for devices

SYNOPSIS
       probedev [ -f device-table-file ]

   where:
       device-table-file   Table of device names for which to probe.

DESCRIPTION
       The probedev command probes the system for any of the devices listed
       in the device-table-file.  Any device which is currently configured,
       or which can be successfully configured, is written to standard
       output.

       Devices can be configured only if the device driver for the device is
       configured into the currently-running kernel.

       Options are:

       -f     Read device names from device-table-file.  The default is
              /usr/etc/probedevtab.

FILES
       /usr/etc/probedevtab      Default table of possible device names.

DIAGNOSTICS
       The probedev command exits with one of the following exit codes:

        0     The command completed successfully.

        1     The command failed due to a missing device-table-file.

        2     The command failed because the user is not superuser.

        3     The command failed due to an error in the command line.

SEE ALSO
       dgsysctl(2).

NOTE
       Devices which are installed at non-standard addresses will not be
       found by probedev.

       You must be superuser to use this command.












Licensed material--property of copyright holder(s)                         1
Museum
