mount(1M) DG/UX 5.4R3.00 mount(1M)
NAME
mount, umount - mount and dismount file systems
SYNOPSIS
mount [ -p ]
mount -a [ fnv ] [ -t type ]
mount [ -fnrv ] [ -t type ] [ -o options ] filesystem directory
mount [ -vfn ] [ -o options ] filesystem | directory
umount [ -t type ] [ -h host ] [ -e ]
umount -a [ v ] [ -e ]
umount [ -v ] [ -e ] filesystem | directory ...
DESCRIPTION
Use mount to mount file systems, or to display currently mounted file
systems. Use umount to unmount file systems. Alternatively, you may
use the Mount and Unmount operations in the File_System->Local and
File_System->Remote menus of sysadm. Only root can mount or umount a
file system.
The mount command has four formats:
mount [ -p ] With no arguments, it displays currently
mounted file systems.
mount -a [ options ] With no arguments but with the a(ll) switch,
it mounts some or all of the file systems
listed in the file /etc/fstab.
mount [ options ] filesystem directory
With two arguments, it mounts the named
filesystem on the named directory.
mount [ options ] filesystem | directory
With one argument, it mounts the named
filesystem or directory, using a matching
command line in the file /etc/fstab.
The umount command has three formats:
umount [ -t type -h host ] [ -e ]
With no arguments, it unmounts file systems of
the specified type or from the specified host,
that are listed in the file /etc/mnttab
umount -a [ v ] [ -e ]
With no argument but with the a(ll) switch, it
unmounts the file systems listed in the file
/etc/mnttab.
umount [ -v ] [ -e ] filesystem | directory
With one argument, it unmounts the file system
that is mounted from filesystem, or mounted
on directory.
Licensed material--property of copyright holder(s) 1
mount(1M) DG/UX 5.4R3.00 mount(1M)
Arguments
The filesystem argument names the file system to be mounted or
unmounted. It may be local or remote. To specify a local file system,
enter for filesystem a pathname that resolves to a local resource,
such as: a disk partition (a virtual disk created with admvdisk), a
tape or cdrom device, or an area of memory. To specify a remote (nfs)
file system, enter the filesystem argument as host:pathname, where
host is the remote host's name and pathname is a directory on the
remote host. To specify a partition on a DOS formatted hard disk,
the filesystem argument is pathname:partition letter, where pathname
is the path to the DOS hard disk that is being mounted and partition
letter is the partition on the hard disk that is to be mounted (c-z,
with c being the first partition).
The directory argument is the mount point: the pathname of a
directory on the local system. The directory must already exist.
Usually, the mount point should be an empty directory: if not empty,
its contents are hidden while the filesystem is mounted on it.
If directory is a symbolic link, the filesystem is mounted on the
resolution directory rather than on the symbolic link.
If a physically write protected medium is the subject of a read/write
mount, the error ENXIO (no such device or address) results.
Options
-p Display the mounted file systems in a format suitable for
use in /etc/fstab.
-a All. Attempt to mount all the file systems described in
/etc/fstab. If a type argument is specified with -t, mount
all file systems of that type. File systems are not
necessarily mounted in the order shown in /etc/fstab.
-f Fake an /etc/mnttab entry, but do not actually mount any
file systems.
-n Mount the file system without making an entry in
/etc/mnttab.
-v Verbose. Display a message indicating each file system
being mounted.
-t type Specify a file system type. The accepted types are dg/ux,
cdrom, dos, swap, and nfs. See options below for the
arguments relevant for each type; see fstab(4) for a more
detailed description of these types.
-r Mount the specified file system read-only, even if the
entry in /etc/fstab specifies that it is to be mounted
read-write.
Physically write-protected, magnetic tape, and cdrom file
systems should be mounted read-only. If they are mounted
Licensed material--property of copyright holder(s) 2
mount(1M) DG/UX 5.4R3.00 mount(1M)
read-write, errors occur when the system attempts to update
access times, even if no write operation is attempted.
-o options
Specify file system option arguments--one or more comma-
separated words from the list below. Some options are
valid for all file system types, while others apply to a
specific type only.
These option arguments are valid for all file system types:
ro | rw Allow read-only or read-write access.
Note: cdrom file systems are mounted
read-only regardless of this argument.
nosuid Setuid execution disallowed.
noauto If this file system is currently mounted
read-only, do not mount it. If the file
system is not currently mounted, display
an error message.
The default for cdrom file systems is ` ro,suid '. For all
other types, the default is ` rw,suid '.
These option arguments are valid for dg/ux file systems:
fsynconclose
Whenever a file in this mounted file system
is closed, write its dirty pages to disk.
This option decreases the likelihood of data
loss in the event of a system crash, but may
degrade performance.
fscklogsize=n
Log changes to system data in a manner that
allows fast recovery by fsck. This option
may degrade performance.
ramdisk Mount a memory-resident file system. See
mfs(4) for a detailed description of memory-
resident file systems.
If the ramdisk argument is present, the following three
arguments are also allowed:
usewiredmemory
By default, the data in the memory file
system is subject to being swapped to disk.
Use this argument to prevent swapping.
maxfilespace=n
The default number of blocks in a memory file
system is 2048. Use this argument to set the
maximum size to n blocks. No memory is
allocated until it is actually used. If the
Licensed material--property of copyright holder(s) 3
mount(1M) DG/UX 5.4R3.00 mount(1M)
usewiredmemory argument is present, n may
exceed the available memory. If this happens,
the system allocates as many blocks as there
are available, up to n; it does not report an
error.
maxfilecount=n
The default number of file nodes that can be
allocated in a memory file system is 16384.
Use this argument to set the maximum to n.
If the usewiredmemory argument is present,
n may cause available memory to be exceeded.
If this happens, the system allocates as many
file nodes as available memory allows, up to
n nodes; it does not report an error.
This option argument is only valid for cdrom file systems:
noversion ISO-9660 CDs have file names that have a
version number at the end of the name. This
is to allow multiple versions of the same
file to exist in the same directory with the
same base name. To remove the version number
(usually a -1), specify this option. If
there are multiple files with the same base
name, then the first one found in the
directory will be the only one that is
accessible with basename. The other versions
can be specified by typing in the entire
name, including the version number.
These option arguments are valid for nfs (NFS) file
systems:
bg | fg If the first attempt fails, retry in the
background, or, in the foreground.
secure Requires clients to use a more secure
protocol when accessing the directory.
Secure RPC using DES Authentication is an
additional feature that must be purchased
separately from the DG/UX (Trademark) ONC
(Trademark)/NFS® product. You must have this
feature to use the secure option.
retry=n The number of times to retry the mount
operation.
rsize=n Set the maximum read buffer size to n bytes.
wsize=n Set the maximum write buffer size to n bytes.
timeo=n Set the NFS timeout to n tenths of a second.
Licensed material--property of copyright holder(s) 4
mount(1M) DG/UX 5.4R3.00 mount(1M)
retrans=n The number of NFS retransmissions.
port=n The server IP port number.
soft | hard Return an error if the server does not
respond, or continue the retry request until
the server responds.
intr Allow keyboard interrupts to kill (or signal)
a process that is hung waiting for a response
from a remote server.
acregmin=n Hold cached attributes for at least n seconds
after file modification.
acregmax=n Hold cached attributes for no more than n
seconds after file modification.
acdirmin=n Hold cached attributes for at least n seconds
after directory update.
acdirmax=n Hold cached attributes for no more than n
seconds after directory update.
actimeo=n Set min and max times for regular files and
directories to n seconds.
Regular defaults are:
fg,retry=10000,timeo=7,retrans=3,port=NFSPORT,hard,\
acregmin=3,acregmax=60,acdirmin=30,acdirmax=60
Defaults for rsize and wsize are set internally by
the system kernel.
umount Options
-h host Unmount all file systems listed in /etc/mnttab that are
remote-mounted from host.
-e With the -e flag set, the umount command does not wait for
remote servers to respond when unmounting nfs mounted file
systems. This is useful when a system needs to be shutdown
in a hurry. The -e flag does not solve the problem of long
delays with nested hard mounts. A nested mount is a remote
mount on a mount point that is also a remote mount point.
The remote mount points may be on the same or different
machines. For example, on system A you mount /foo from
system B. Then on system A you mount /bar from system C on
the mount point /foo from system B making /foo/bar. If
system B is down when you attempt to umount /bar on system
C, an indefinite delay in your system shutdown could occur.
Using soft mounts is a solution for read-only file systems.
In general you must avoid nested mounts to insure a timely
shutdown.
Licensed material--property of copyright holder(s) 5
mount(1M) DG/UX 5.4R3.00 mount(1M)
-t type Unmount all file systems listed in /etc/mnttab that are of
a given type.
-a Unmount all file systems currently mounted (as listed in
/etc/mnttab).
-v Verbose. Display a message indicating each file system
being unmounted.
NFS FILE SYSTEMS
Background vs. Foreground
File systems mounted with the bg option indicate that mount is to
retry in the background if the server's mount daemon (mountd(1M))
does not respond. mount retries the request up to the count
specified in the retry=n option. Once the file system is mounted,
each NFS request made in the kernel waits timeo=n tenths of a second
for a response. If no response arrives, the time-out is multiplied
by 2 and the request is retransmitted. When the number of
retransmissions has reached the number specified in the retrans=n
option, a file system mounted with the soft option returns an error
on the request; one mounted with the hard option prints a warning
message and continues to retry the request.
Read-Write vs. Read-Only
File systems that are mounted rw (read-write) should use the hard
option to prevent possible loss of data; and the intr option to
enable keyboard interrupts.
File Attributes
The attribute cache retains file attributes on the client.
Attributes for a file are assigned a time to be flushed. If the file
is modified before the flush time, then the flush time is extended by
the time since the last modification (under the assumption that files
that changed recently are likely to change soon). There is a minimum
and maximum flush time extension for regular files and for
directories. Setting actimeo=n extends flush time by n seconds for
both regular files and directories.
EXAMPLES
To mount a local disk:
mount /dev/dsk/usr /usr
To mount all DG/UX file systems:
mount -at dg/ux
To mount a remote file system:
mount serv:/usr/src /usr/src
To mount a remote file system that is listed in /etc/fstab:
mount /usr/src
To hard mount a remote file system:
mount -o hard serv:/usr/src /usr/src
Licensed material--property of copyright holder(s) 6
mount(1M) DG/UX 5.4R3.00 mount(1M)
To save current mount state:
mount -p > /etc/fstab
To mount a memory file system (the name /dev/memtmp is arbitrary and
will be created by the mount command):
mount -o ramdisk /dev/memtmp /mnt
To mount a memory file system using wired memory:
mount -o ramdisk,usewiredmemory /dev/memtmp2 /memory1
FILES
/etc/mnttab table of mounted file systems
/etc/fstab table of file systems mounted at boot
SEE ALSO
fsck(1M), mountd(1M), nfsd(1M), admvdisk(1M), dgmount(2), mkdir(2),
open(2), umount(2), fstab(4), fs(4), mfs(4), mnttab(4),
/usr/include/sys/dgmount.h, /usr/include/sys/nfs.h.
Licensed material--property of copyright holder(s) 7